Pieces of metal can come loose from inside the shredder’s housing and be ejected, posing a laceration hazard. Also, the hopper can become detached from the shredder, posing a laceration hazard.
About 5,900 (In addition, about 90 were sold in Canada) Metal Chipper Machine
DR Power at 800-550-4845 from 8:30 a.m. to 5 p.m. ET Monday through Friday, email at recall@DRPower.com or online at http://lvtbrc.com/ or www.drpower.com and click on “Product Recalls” at the bottom of the page for more information.
This recall involves DR Power Equipment Chipper Shredders with model numbers CS35050BEN, CS35050BENR, CS35050BENSD, CS35150BEN, CS35150BENR, CS35150BENSD, CS35150DEN, CS45040DMN, CS45040DEN, CS45040DENR, CS45040DMNR, CS43030DMN and CS43030DMNR. For model numbers beginning CS3, the model number is on the side of the unit. For model numbers beginning CS4, the model and serial numbers are printed on a white label located on the base of the machine to the left of the engine manual start handle. The chippers were sold in orange and black with a funnel at the top to shred brush.
Consumers should immediately stop using the recalled chipper shredders and contact DR Power Equipment to receive a full refund or a free repair including shipping.
The firm has received 79 reports of parts coming loose inside the housing of the chipper shredder or pieces of metal ejecting, including two reports of injuries. The firm has received three reports of hoppers unexpectedly detaching from the chipper shredder, including one minor abrasion injury.
Note: Individual Commissioners may have statements related to this topic. Please visit www.cpsc.gov/commissioners to search for statements related to this or other topics.
The recalled engines can overheat, posing fire and burn hazards.
The assembly instructions can cause consumers to incorrectly attach the bottom portion of the tiller/cultivator upside down, causing the tines to rotate toward the user, posing a laceration hazard.
Pieces from the recalled leaf blowers and vacuums can come loose inside the unit and be ejected, posing a laceration hazard to users and bystanders.
The improperly manufactured camshafts in the engines can cause the starter rope to suddenly retract when pulling to start, posing an injury hazard.
The recalled log splitter’s hydraulic cylinder rod can separate from the piston, preventing the wedge from retracting. Reengaging the rod to the piston can cause the rod and wedge to move unexpectedly, posing injury hazards.
The zipline’s stainless-steel cable can break, posing a fall hazard.
The U.S. Consumer Product Safety Commission (CPSC) is charged with protecting the public from unreasonable risk of injury or death associated with the use of thousands of types of consumer products. Deaths, injuries, and property damage from consumer product-related incidents cost the nation more than $1 trillion annually. CPSC's work to ensure the safety of consumer products has contributed to a decline in the rate of injuries associated with consumer products over the past 50 years.
Federal law prohibits any person from selling products subject to a Commission ordered recall or a voluntary recall undertaken in consultation with the CPSC.
U.S. Consumer Product Safety Commission 4330 East-West Highway Bethesda, MD 20814
Contact Us: 800-638-2772 (TTY 800-638-8270) Toll-Free Consumer Hotline | Time: 8 a.m. - 5.30. p.m. ET
CPSC.gov is an official website of the United States government.
The link you selected is for a destination outside of the Federal Government. CPSC does not control this external site or its privacy policy and cannot attest to the accuracy of the information it contains. You may wish to review the privacy policy of the external site as its information collection practices may differ from ours. Linking to this external site does not constitute an endorsement of the site or the information it contains by CPSC or any of its employees.
Jaw Crusher Eccentric Shaft Click Ok if you wish to continue to the website; otherwise, click Cancel to return to our site.