An assortment of hand tools is available for all your jobsite applications.
The LOBSTER Model EHC-16PCU cordless hand-held rebar cutter cuts up through #5 (5/8-in. dia.) grade 60 rebar. Rebar Thread Rolling Machine
The 240 incorporates four-stroke engine technology on a one-person, hand-held hole-digging product.
The KPB series ergonomic paving breakers are available in 50-, 60- and 90-lb. models.
The 27.1-lb. HM1214C SDS-MAX AVT hammer includes Anti-Vibration Technology, a counterbalance system that delivers more efficient hitting with less vibration in the tool.
The DF 16 rebar tier is a simple, mechanical unit that allows an operator to tie up to 1,000 knots per hour.
The SC7314-XL SpeediCut-XL high-speed saw features a 14-in. blade capacity, increased efficiency and lower emissions.
TS 410 EWC and TS 420 EWC
The TS 410 EWC and TS 420 EWC Cutquik cut-off machines feature an electronic water control with a conveniently mounted keypad that enables water flow adjustment while cutting and remembers the last setting used.
Model 2 1328 0050 SA Pneumatic Core Drill
The Model 2 1328 0050 SA rig-mounted pneumatic core drill is suited for heavy-duty drilling of up to 12-in.-diameter holes in concrete, reinforced concrete, asphalt and refractory.
Built on the foundation of the K750, the K760 power cutter is equipped with an X-Torq engine that reduces emissions up to 75% and lowers fuel consumption.
DD350 and DD500 Coring Systems
Hilti's DD 350 and DD 500 Coring Systems incorporate water-cooled, high-frequency 1,000-Hz brushless motors rated at 3,600 and 5,500 watts.
The Dirt Tamp is designed to provide even compacting of materials ranging from sand to asphalt.
VESSEL GT-5000HD Gas-powered Hammer Drill
The 39.5-lb. VESSEL GT-5000HD hammer drill is powered by a rugged two-stroke, forced air-cooled gasoline engine that provides high torque output, as well as portability.
SDS Max and Spline Hammers
SDS Max and Spline models include the D25602K and D25651K 1 3/4-in. combination rotary, D25831K and D25851K chipping and D25501K and D25553K 1 9/16-in. combination rotary hammers.
Gear Keeper retractable tethers and lanyards are precision-made attachment systems for tools and instruments weighing up to 25 lbs.
Model DH38YE2 Rotary Hammer
Rebar Bender Hand Tool The Model DH38YE2 1 1/2-in. spline shank rotary hammer can hammer or hammer/drill holes in concrete for anchors or rebar, demolish or chisel concrete, cut, dig, tamp or drive ground rods.