A researcher holds the scaffolding with tiny copper foils attached. These copper pieces will be struck with lasers, heating them to thousands of degrees Fahrenheit.
A researcher holds the scaffolding with tiny copper foils attached. These copper pieces will be struck with lasers, heating them to thousands of degrees Fahrenheit. laser cutter for beginners
A researcher holds the scaffolding with tiny copper foils attached. These copper pieces will be struck with lasers, heating them to thousands of degrees Fahrenheit.
In a few picoseconds (trillionths of a second), a small, thin piece of copper momentarily becomes dense plasma, specifically a state called warm dense matter, warm being a relative term – the metal is nearly 200,000 degrees Fahrenheit. With the short duration of a high-powered laser pulse, copper shifts from a solid state to a plasma state in an instant before it explodes. Understanding the progression of heat in the copper is an exciting breakthrough in physics relevant to the interior of giant planets and laser fusion fuel cores.
Hiroshi Sawada, an associate professor in the Department of Physics at the University of Nevada, Reno, along with his colleagues at several international institutions, has developed a method to track how material heats and cools after a laser pulse has been fired. In a research paper published this week in the prestigious journal Nature Communications, the researchers outline their method. Using ultrashort-duration X-ray pulses from the X-ray Free Electron Laser (XFEL) at the SPring-8 Angstrom Compact free-electron Laser (SACLA) facility in Japan, physicists can “see” the temperature change in the material over time, allowing for a greater understanding of how plasma forms when metal is zapped by high-powered lasers.
Due to the extremely fast heating phenomena, it was previously difficult or impossible to capture data about how the plasma state progresses through the copper or other material. In what is known as a pump probe experiment, the physicists used a relativistic intensity laser pulse from a high-powered laser to first heat up a small piece of copper (pump), then an X-ray pulse from a secondary laser collected the X-ray images of the copper (probe). Then, the temperatures and ionization degrees, or presence of plasma within the copper, was deduced from the image data. The researchers repeated this experiment many times, delaying the secondary laser pulse by a little longer with each firing to track the progression of the heat through the material.
The XFEL and high-powered lasers used in these experiments are located at one of only three facilities in the world capable of these pump-probe experiments, the others being Linac Coherent Light Source (LCLS) at SLAC National Accelerator Laboratory in the U.S., and the European XFEL in Germany. The researchers initially conducted these experiments before the COVID-19 pandemic using the SACLA built by RIKEN and the Japan Synchrotron Radiation Research Institute (JASRI). XFELs are essential tools in a wide range of fields, including chemical engineering and biochemistry. The results of the laser firing were the most accurate reported data about how the material changed as heat was transferred on a micron scale. For scale, a human hair is about 70 microns thick.
“We had some predictions from simulations, but that was totally different from what we saw,” Sawada said. “We were overwhelmed by the number of surprising results from our first experiment, and we didn’t know which one we should highlight.”
The researchers expected that the copper would be transformed into classical plasma after being hit with the laser pulse. What the researchers found, based on the x-ray pulse, was that the plasma was instead a warm dense matter state.
Samples with robust results are important for laser experiments, because beamtime on the X-ray laser is extremely competitive. It can take years for a research group to gain access to a specific laser. In this study, the copper samples were laser cut into strips and manually mounted on a sample holder. Each laser shot destroyed the copper strip, and the team was able to collect data from 200 to 300 target shots.
The improved technology using XFEL pulses achieves finer temporal and spatial resolution than conventional methods. While a tenth of a trillionth of a second seems imperceptibly small, much can transpire on an atomic level, including heat fronts traveling at nearly the speed of light. Diagnosing warm dense matter remains a challenge, requiring more accurate technology and cross-checking methods, Sawada said.
The research was supported by a grant Sawada received from the National Science Foundation (NSF) with the goal of developing novel measurement techniques using XFEL. Sawada’s coauthors include physicists from JASRI, RIKEN, the Institute of Laser Engineering at Osaka University, SLAC National Accelerator Laboratory operated by Stanford University, University of Alberta, Lawrence Livermore National Laboratory and Laboratory for Laser Energetics at the University of Rochester.
Related LinkResearchers studying high-energy-density plasmas received grants
Sawada envisions this method being used in several areas of physics, including plasma physics, high-energy-density science, astrophysics, inertial fusion energy research, and quantum and atomic physics. It can be applied at other free electron laser facilities, such as the next-generation MEC-U facility at SLAC, which combines high-power petawatt and high-energy kilojoule lasers with LCLS. Additionally, these findings shed light on how quickly and effectively heat transfers from lasers to the high-density material, a topic for further exploration using extremely high-intensity lasers like the NSF ZEUS Laser Facility at the University of Michigan and a future NSF OPAL laser at the University of Rochester.
It can also be used to study how micron-scale deformities in the material being fired on can affect how heat is transferred through the material, and using lasers based at other facilities with different energy outputs, testing the progression of heat in different materials.
Faces of the Pack: Sheena Harvey – Standards support career success
Gamechanger: School of Public Health expands mental health services, training with support from the Community Foundation’s Northern Nevada Endowment Fund
Finding my voice in Yeosu
Cruising into the University – Hot August Nights to make the University of Nevada, Reno a central location in 2025
Commemorating 20 years of impact and growth at the Latino Research Center
Making change through amplifying research, supporting student achievement and strengthening advocacy and outreach
Faces of the Pack: Jody Lykes’ energy radiates from The Honors College
Recruiter, adjunct instructor, community leader makes wide contributions
Nuclear Regulatory Commission funds new nuclear microreactor safety research
University faculty to help develop regulations that ensure safe and rapid deployment of sustained electric power capacity to military and disaster sites
Mental health giving opportunities at the University
Learn how you can support providers-in-training or the mental health of University students
Nevada Multi-Tiered System of Supports initiative drives statewide student success
Schools with strong implementation saw higher student achievement, improved attendance and reductions in behavioral incidents
College of Education & Human Development hosts Nevada Association for Positive Behavior Support Conference
Conference brings together educators across Nevada to foster positive school environments and community supports
You’re more complex than a worm, and researchers now believe they know why
Drivers of organismal complexity may lie in the number of protein families, rather than the number of genes
AI-driven research uncovers how physician media choice shapes online patient experience
Voice or text? New study reveals when text outperforms voice in online healthcare communication
metal tube laser cutting machine Subscribe to the Nevada Weekly newsletter