Blog

Residential Cooling Showcase 2022 | 2022-04-25 | ACHR News

The ACHR NEWS introduces the latest cooling equipment available for summer 2022 in order to help contractors distinguish between brands.

The Cooling Showcase is split into two parts — commercial and residential. Commercial equipment information will be published in the May 23 issue, while this issue will focus on residential/light commercial cooling systems. The coverage features specific information about each individual product as submitted by the manufacturers. Lithium Battery Busbar

Residential Cooling Showcase 2022 | 2022-04-25 | ACHR News

Included below is the product chart, which includes technical facts, such as unit tonnage, refrigerant type, efficiency rating, and cooling capacity. Select a product in the gallery below for more in-depth information on the features of each individual unit and technical support information from the manufacturer. The manufacturers provided all of the data, therefore, any questions should be directed to them via the contact information provided.

Serviceability features: When installed as part of a complete communicating system including the Ion System Control with Wi-Fi capability, this heat pump offers more precise system control with remote access, text-based diagnostics, and contractor information displayed. Smaller, lighter design than most two-stage units. Easy-access service valves.

Noise-reduction features: Variable-speed compressor and compact ECM fan motor operate at quieter, lower speeds most of the time (as low as 56 decibels). Soft start and smooth ramp-up to operating speeds. Cabinet includes isolation compressor grommets and a high-performance compressor sound shield for lower noise.

IAQ equipment supported: Compatible with most industry IAQ offerings.

Thermostat compatibility: Compatible with most thermostats. Five-stage operation, communicating, and self-configuring functions only available when used with the Airquest® Ion System Control.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: When installed as part of a complete communicating system including the Ion System Control with Wi-Fi capability, the Airquest HVH8 Ion 18 heat pump provides five-stage variable-speed technology in a compact design. Efficiencies up to 11 HSPF/19 SEER.

Warranty information: Ten-year No Hassle Replacement™ limited warranty. (If compressor or condenser coil fails due to defect during applicable No Hassle Replacement limited warranty time period, one-time replacement with comparable unit will be provided.) Ten-year parts limited warranty to original purchaser with timely registration. Parts limited warranty is five-year parts if not registered within 90 days of installation except in jurisdictions where warranty benefits cannot be conditioned on registration (see warranty certificate for details and restrictions).

Contact: International Comfort Products, 317-481-5744; www.goairquest.com.

Serviceability features: Easy-access service valves. External high and low refrigerant service ports. Control panel allows for quicker service access with only two screws. Filter-drier supplied with every unit for easy installation.

Noise-reduction features: Top-discharge design minimizes noise and improves airflow. To reduce noise at maximum performance, units are equipped with scroll compressors and isolation compressor grommets.

IAQ equipment supported: As part of an installed system, this air conditioner is compatible with a wide range of IAQ products including filters, humidifiers, UV lights, and electronic air cleaners (EACs). Factory-installed outdoor air temperature sensor.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: Energy Star-qualified with efficiencies up to 18 SEER/14 EER. Scroll compressor provides reliable two-stage cooling for improved temperature and humidity control. Galvanized steel construction protects unit against extreme weather. New welded aluminum outdoor coil technology will deliver improved corrosion resistance while satisfying future performance requirements.

Warranty information: Residential applications: 10-year parts limited warranty, including compressor and coil, to original purchaser with timely registration. Parts limited warranty period is five-year parts if not registered within 90 days of installation, except where restricted by jurisdiction. See limited warranty certificate for details and restrictions.

Contact: International Comfort Products, 317-481-5744; www.goairquest.com.

Serviceability features: The VSA1BE Series has easily removable side paneling that can be displaced without removing the top grille assembly for easy access to interior components. All units come with a factory-installed high-pressure switch, which protects against abnormally high system pressures, and the auto reset feature, which helps to prevent recurring service visits.

Noise-reduction features: Reliable and energy-efficient scroll compressor technology ensures quiet operation. A sound-absorbing composite base pan further reduces sound levels during cooling. Expertly engineered air discharge and high-efficiency fan motor also contribute toward lower sound levels.

IAQ equipment supported: Manufacturer did not specify.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Shares replacement parts with other models.

Additional features: Removable top grille assembly: allows ease of service from the top without disconnecting fan motor leads. Microchannel coils: all aluminum coils in all models, which provide high corrosion resistance and require less refrigerant. Permanently lubricated motor: a heavy-duty PSC motor for long-lasting reliability and quiet operation. Requires no maintenance and is completely protected from rain and snow. Top assembly with wire discharge grille: designed for maximum airflow and quiet operation.

Warranty information: Standard 10-year warranty on parts and on the compressor in residential usage. The Airtemp product line also feature a one-year Quality Pledge on all compressors, which provides the contractor a replacement air conditioner should the compressor fail within 12 months of installation.

Special installation requirements: All Airtemp equipment must be installed per the instructions in the operating manual.

Contact: R.E. Michel Co., 410-553-3714; www.airtemp.com.

Serviceability features: Four removable panels for coil cleaning and a removable fan grille with wires long enough to place the grille on the ground without disconnecting the wires for coil cleaning. The unit control board is separate from the inverter board to allow independent replacement should the need arise. Line set connections are gauge ports at a 45° angle, allowing easier connection for refrigerant readings.

Noise-reduction features: Units come standard with rubber-mounting grommets for the compressors and an insulated sound blanket. The variable-speed fan motor and true variable-speed compressor operation offer sound levels as low as 60 dBA and up to 72 dBA running at full capacity.

IAQ equipment supported: The LYNX offers five different operating modes, three in cooling operation and two in heating operation, which offer optional enhanced dehumidification for climates that need it. Its ability to pair with variable-speed indoor equipment offers the option to apply additional IAQ accessories.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: Available under the Ducane™, Concord®, and Allied™ brands. Quickly adaptable with a wide range of AHRI-rated system matches. QuickLink™ inverter technology is powered by intelligent algorithms. Works with any conventional 24-V thermostat. Energy savings up to 22% annually. Quiet Shift™ technology with ratings up to 18 SEER and 10 HSPF, LYNX offers superior performance and quiet operation (less than half the sound typically heard from a 14 SEER single- stage heat pump).

Warranty information: Standard five-year parts and compressor warranty with up to 10-year parts and compressor extended coverage with registration.

Special installation requirements: Operating modes, 24-V thermostat, and compatibility with a wide range of indoor equipment.

Contact: Allied Air Enterprises, 800-448-5872; www.alliedair.com.

With Comfort Speed™ inverter technology

Serviceability features: Integrated communicating ComfortBridge™ technology allows for easy commissioning and diagnostics via indoor board Bluetooth with the CoolCloud™ mobile application. Advanced diagnostics, control algorithmic logic. diagnostic indicator lights, seven-segment LED display, and fault code storage. Field-selectable boost mode increases compressor speed during unusually high loads. Coil/ambient temperature sensors. Contractor-friendly features include top and side maintenance access, sweat connection service valves with easy access to gauge ports, and single-panel access to controls with space provided for field-installed accessories.

Noise-reduction features: AVXC20 air conditioners deliver quiet, dependable airflow across the condensing unit. Inverter-driven technology boosts acoustical comfort, allowing the unit to operate at lower sound levels without the constant on/off of single- and two-stage systems. A high-efficiency, variable-speed, ECM condenser fan motor is designed to run quietly. The AVXC20 features an advanced fan design plus acoustically engineered noise-reduction enhancements — including a high-density, sound-reduction compressor blanket and a specially designed sound-control top.

IAQ equipment supported: Compatible with IAQ equipment including the Clean Comfort Indoor Air Essentials line of filtration, humidification, dehumidification, purification, ventilation, and zoning products. For field-installed accessories, the Amana brand AVXC20 air conditioner provides space with single-panel access to controls.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: Designed for consistent indoor comfort and high-efficiency, Comfort Speed inverter technology automatically adjusts the speed of the compressor and condensing fan motor based on cooling demand. Integrated communicating ComfortBridge technology continuously monitors system performance for customized indoor comfort. Advanced diagnostics constantly monitor the system, reducing failures, pinpointing trouble spots for fast fixes. Five-millimeter, refrigeration-grade premium copper tubing and aluminum fin condenser coil configuration deliver outstanding heat transfer properties. Energy Star 2020 most efficient.

Warranty information:  Lifetime unit replacement limited warranty and 10-year parts limited warranty. Complete warranty details are available from local dealer or at amana-hac.com.

Special installation requirements: In communicating mode, only two low-voltage wires to outdoor unit are required. A color-coded terminal strip for non-communicating setup is included. Field-selectable boost mode can be used to increase compressor speed during unusually high loads. The factory-provided bi-flow filter-drier must be field installed. Comes fully charged for 15 feet of tubing length.

Contact: Amana Heating & Air Conditioning, 281-536-6063; amana-hac.com.

With Comfort Speed™ inverter technology

Serviceability features: Service-friendly features include Amana algorithmic control logic, coil/ambient temperature sensors, diagnostic indicator lights, seven-segment LED display, fault code storage, and suction pressure transducer. Quick, easy commissioning/diagnostics using integrated ComfortBridge™ communicating technology that earned an ACHR NEWS Dealer Design Award. It’s conveniently accessed via indoor board Bluetooth using the CoolCloud™ mobile app. Amana brand heat pumps provide top and side maintenance access, sweat connection service valves with easy access to gauge ports, and single-panel access to controls.

Noise-reduction features: A high-efficiency, variable-speed, ECM condenser fan motor is designed to run quietly. Amana brand’s inverter-driven technology boosts acoustical comfort, allowing the unit to operate at lower sound levels without the constant on/off of single- and two-stage systems. Advanced fan design combines with acoustically engineered noise-reduction enhancements — including a high-density foam, sound-reduction compressor blanket and a specially designed sound-control top — providing dependable, quiet airflow across the condensing unit for years of quiet comfort.

IAQ equipment supported: Compatible with IAQ equipment including the Clean Comfort Indoor Air Essentials line of filtration, humidification, dehumidification, purification, ventilation, and zoning IAQ products. For field-installed accessories, the AVZC20 inverter-driven heat pump provides space with single-panel access to controls.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: Comfort Speed inverter technology automatically adjusts the speed of the compressor and condensing fan motor based on cooling demand for consistent indoor comfort and high-efficiency operation. Communicating ComfortBridge technology is integrated for continuous system monitoring and customized indoor comfort. A 7-mm, refrigeration-grade, premium copper tubing and aluminum fin condenser coil configuration delivers outstanding heat transfer properties with R-410A refrigerant. Amana control algorithmic logic. High-efficiency variable-speed ECM condenser fan motor.

Warranty information: Lifetime unit replacement limited warranty and 10-year parts limited warranty. Complete warranty details are available from local dealer or by visiting amana-hac.com.

Special installation requirements: In communicating mode, only two low-voltage wires to the outdoor unit are required. A bi-flow filter-drier is provided from the factory for field installations. Field-selectable boost mode can be used to increase compressor speed during unusually high loads. Comes fully charged for 15 feet of tubing.

Contact: Amana® Heating & Air Conditioning, 281-536-6063; amana-hac.com.

Serviceability features: The Platinum 18 heat pump features American Standard Link, an innovative technology that simplifies the installation, commissioning, and remote monitoring of variable-speed HVAC systems. It assists technicians with installation accuracy through automated configuration, charging, and system testing; and it works with remote monitoring to provide quicker solutions and more efficient service calls. American Standard Link provides the exact data technicians need for installation and troubleshooting on their own smart device.

Noise-reduction features: The lower compressor modulation and fan speeds yield amazingly low sound levels — 54 to 76 dBA,

IAQ equipment supported: Works in conjunction with American Standard AccuClean Whole Home Air Cleaner to remove 99.89% of airborne pollutants, including dust mites, smoke, pet dander, and viruses.

Thermostat compatibility: Requires a special thermostat.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: The new Platinum 18 variable-speed heat pump is part of the new American Standard Link communicating equipment lineup that will be available across the nation in fall 2022. These models work with all existing AccuLink variable-speed indoor equipment and controls, as well as the American Standard Link air handlers and smart thermostat that will be available later this year.

Warranty information: Limited warranty registered: 12-year compressor, 10-year coil and functional parts. Non-registered: five-year compressor, five-year coil and functional parts.

Special installation requirements: Manufacturer did not specify.

Contact: American Standard Heating and Air Conditioning, 855-210-0081; americanstandardair.com.

Serviceability features: When installed as part of a complete communicating system including the Ion System Control with Wi-Fi capability, the Arcoaire® HVH8 Ion 18 heat pump offers more precise system control with remote access, text-based diagnostics, and contractor information displayed. Smaller, lighter design than most two-stage units. Easy-access service valves.

Noise-reduction features: Variable-speed compressor and compact ECM fan motor operate at quieter, lower speeds most of the time (as low as 56 decibels). Soft start and smooth ramp-up to operating speeds. Cabinet includes isolation compressor grommets and a high-performance compressor sound shield for lower noise.

IAQ equipment supported: Compatible with most industry IAQ offerings.

Thermostat compatibility: Compatible with most thermostats. Five-stage operation, communicating and self-configuring functions only available when used with the Arcoaire Ion System Control.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: When installed as part of a complete communicating system including the Ion System Control with Wi-Fi capability, the Arcoaire HVH8 Ion 18 heat pump provides five-stage variable-speed technology in a compact design. Efficiencies up to 11 HSPF/19 SEER.

Warranty information: Ten-year No Hassle Replacement™ limited warranty. (If compressor or condenser coil fails due to defect during applicable No Hassle Replacement limited warranty time period, one-time replacement with comparable unit will be provided.) Ten-year parts limited warranty to original purchaser with timely registration. Parts limited warranty is five-year parts if not registered within 90 days of installation except in jurisdictions where warranty benefits cannot be conditioned on registration (see warranty certificate for details and restrictions).

Contact: International Comfort Products, 317-481-5744; www.goarcoaire.com.

Serviceability features: Easy-access service valves. External high and low refrigerant service ports. Control panel allows for quicker service access with only two screws. Filter-drier supplied with every unit for easy installation.

Noise-reduction features: Top-discharge design minimizes noise and improves airflow. To reduce noise at maximum performance, units are equipped with scroll compressors and isolation compressor grommets.

IAQ equipment supported: As part of an installed system, this air conditioner is compatible with a wide range of IAQ products including filters, humidifiers, UV lights, and electronic air cleaners (EACs). Factory-installed outdoor air temperature sensor.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: Energy Star-qualified with efficiencies up to 18 SEER/14 EER. Scroll compressor provides reliable two-stage cooling for improved temperature and humidity control. Galvanized steel construction protects unit against extreme weather. New welded aluminum outdoor coil technology will deliver improved corrosion resistance while satisfying future performance requirements.

Warranty information: Residential applications: 10-year parts limited warranty, including compressor and coil, to original purchaser with timely registration. Parts limited warranty period is five-year parts if not registered within 90 days of installation, except where restricted by jurisdiction. See limited warranty certificate for details and restrictions.

Contact: International Comfort Products, 317-481-5744; www.goarcoaire.com.

Serviceability features: The IDS Light is easy to install and is compatible with most standard 24-vac heat pump thermostats. No complicated or expensive proprietary controls are required.

Noise-reduction features: The IDS Light operates quietly and achieves similar noise levels to other IDS products.

IAQ equipment supported: IAQ is not supported.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: The IDS Light is a 15-SEER compressor solution that features a fully modulating inverter drive at a standard 15-SEER efficiency level. The IDS Light combines the BOVA15, 15 SEER, outdoor, inverter, condensing section with the BVA15 PSC-style air handler, which has foil-faced insulation material to decrease energy loss and condensation. Its fully aluminum coil produces heat transfer, efficiency, and humidity removal, with higher durability and a lower chance of refrigerant leakage.

Warranty information: Ten-year residential limited warranty.

Special installation requirements: This product is installed through the same process as the IDS products (Plus and Premium) and requires no additional training.

Contact: Bosch Thermotechnology, 800-283-3787; www.bosch-thermotechnology.us/us/en.

Serviceability features: These heat pumps offer easier access for service checks, making routine maintenance faster. The systems are also compatible with conventional equipment and devices.

Noise-reduction features: Developed using CFD and FEA tools, the sturdy cabinet, composite swept-wing fan blade, and side-flow air combine to provide sound performance as low as 54 dBA, which is 36% lower volume level than standard vertical discharge heat pumps.

IAQ equipment supported: Champion® offers a complete range of humidifiers, dehumidifiers, air filters, and ultraviolet air purifiers that are compatible with the HMH7 heat pump. These products maintain optimal humidity levels and clean indoor air to alleviate irritations associated with dry or stale air and health problems resulting from bacteria and airborne viruses.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: This heat pump is designed from the ground up to provide all the comfort and technology of a mid-tier efficiency unit at the cost of a base-tier vertical unit. Modulating technology continuously adjusts to offset the rate of heat leaving the home, maximizing comfort and reducing energy bills. It’s an ideal solution for homes in temperate regions that require a compact design, without any sacrifices in comfort or efficiency.

Warranty information: With registration, 10-year compressor limited warranty and 10-year parts limited warranty for years of worry-free comfort.

Special installation requirements: A kit containing a bi-flow filter-drier and an indoor relay and wire harness are required for installation.

Contact: Johnson Controls, 414-344-8594; www.championhomecomfort.com.

Serviceability features: The heat pump features a large electrical box cover and a swing-open electrical box to provide superior full corner access to the inside of the unit for maintenance or service. Angled service ports allow for ample access for zero loss line sets. A removable fan guard provides all top access without removing the entire unit top.

Noise-reduction features: Developed using CFD and FEA tools, the sturdy cabinet and top design provide sound performance of 76 dBA or lower. Compatible accessories for further sound reduction are also available.

IAQ equipment supported: Optional system-matched equipment is available to deliver IAQ achievements including humidifiers, dehumidifiers, and UV-C lighting.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: The LX Series TH6 heat pump is Champion®’s highest performing, single-stage heat pump. Designed to deliver year-round comfort, the Energy Star-qualifying 16 SEER efficiency means lower energy bills. This split-system heat pump is specifically designed to be matched with Champion indoor coils, furnaces, and air handlers for a complete system solution. An advanced control system, Demand Defrost, minimizes defrost cycles, reducing energy costs while maintaining comfort.

Warranty information: One-year labor limited warranty and 10-year parts and compressor limited warranty on registered units.

Special installation requirements: Due to the high efficiency nature of the product, it uses a TXV for refrigerant control both indoors and outdoors. A crankcase heater and suction accumulator protect the compressor across its band of operation and from any anomalous occurrences that could damage the system such as dirty filters.

Controls, 414-344-8594; www.championhomecomfort.com.

Serviceability features: The heat pump features a large electrical box cover and a swing-open electrical box to provide superior full corner access to the inside of the unit for maintenance or service. Angled service ports allow for ample access for zero-loss line sets. A removable fan guard provides all top access without removing the entire unit top.

Noise-reduction features: Developed using CFD and FEA tools, the sturdy cabinet and top design provide sound performance of 76 dBA or lower. Compatible accessories for further sound reduction are also available.

IAQ equipment supported: Optional system-matched equipment is available to deliver IAQ achievements including humidifiers, dehumidifiers, and UV-C lighting.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: The LX Series CH6 heat pump is Coleman®’s highest performing, single-stage heat pump. Designed to deliver year-round comfort, the Energy Star-qualifying 16 SEER efficiency means lower energy bills. This split-system heat pump is specifically designed to be matched with Coleman indoor coils, furnaces, and air handlers for a complete system solution. An advanced control system, Demand Defrost, minimizes defrost cycles, reducing energy costs while maintaining comfort.

Warranty information: One-year labor limited warranty and 10-year parts and compressor limited warranty on registered units.

Special installation requirements: Due to the high efficiency nature of the product, it uses a TXV for refrigerant control both indoors and outdoors. A crankcase heater and suction accumulator protect the compressor across its band of operation and from any anomalous occurrences that could damage the system such as dirty filters.

Contact: Johnson Controls, 414-344-8594; www.colemanac.com.

Serviceability features: These heat pumps offer easier access for service checks, making routine maintenance faster. The systems are also compatible with conventional equipment and devices.

Noise-reduction features: Developed using CFD and FEA tools, the sturdy cabinet, composite swept-wing fan blade, and side-flow air combine to provide sound performance as low as 54 dBA, which is 36% lower volume level than standard vertical discharge heat pumps.

IAQ equipment supported: Coleman® offers a complete range of humidifiers, dehumidifiers, air filters, and ultraviolet air purifiers that are compatible with the HMH7 heat pump. These products maintain optimal humidity levels and clean indoor air to alleviate irritations associated with dry or stale air and health problems resulting from bacteria and airborne viruses.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: The HMH7 17 SEER horizontal discharge heat pump is designed from the ground up to provide all the comfort and technology of a mid-tier efficiency unit at the cost of a base-tier vertical unit. Modulating technology continuously adjusts to offset the rate of heat leaving the home, maximizing comfort and reducing energy bills. It’s an ideal solution for homes in temperate regions that require a compact design, without any sacrifices in comfort or efficiency.

Warranty information: With registration, 10-year compressor limited warranty and 10-year parts limited warranty for years of worry-free comfort.

Special installation requirements: A kit containing a bi-flow filter-drier and an indoor relay and wire harness are required for installation.

Contact: Johnson Controls, 414-344-8594; www.colemanac.com.

Serviceability features: Specialized corner-mounted controls for easy service. External gauge ports at a 45° angle. Individual metal louvered panels remove easily for coil cleaning and service. Removable service panel for internal service.

Noise-reduction features: Grommet-mounted compressor. Heavy-duty compressor sound blanket for quiet operation. Discharge muffler. Noise reduction capability during defrost. Fan orifice for smoother airflow and sound level reduction. Variable-speed condenser fan motor.

IAQ equipment supported: Compatible with most indoor air quality products when they are installed correctly, based on the manufacturer’s installation instructions and matched with a rated air handler or for a fossil fuel rated gas furnace.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: Inverter-driven compressor for true variable-capacity operation, precision environmental control, and exceptional energy savings. Designed for installation with a standard 24-V thermostat and non-communicating equipment. Offers five total operating modes, three cooling and two for heating, to fine-tune the unit’s performance to the application and consumer’s needs. Defrost from the bottom up, to ensure complete defrost, reducing the number of cycles during heating operation.

Warranty information: When installed as an AHRI matched system, the heat pump and all the parts are covered for a full 12 years. The other components such as air handler, furnace, and evaporator coil are also covered for 12 years.

Special installation requirements: Refer to the IOM for complete and correct installation and charging of the equipment, as per the manufacturer. Always make sure all local, state and federal regulations are met.

Contact: Mars/Heat Controller, 517-787-2100, ext. 7217; www.marsdelivers.com.

Serviceability features: The Comfortmaker® CVA9 Ion 19 offers precise system control with remote access (requires Wi-Fi connection and mobile app), text-based diagnostics, and contractor name/information displayed (when installed as part of a complete Ion communicating system including the Ion System Control).

Noise-reduction features: Variable-speed compressor and compact ECM fan motor designed to operate at quieter, lower speeds most of the time (as low as 56 decibels). Soft start and smooth ramp-up to operating speeds. Cabinet includes isolation compressor grommets and a high-performance compressor sound shield for lower noise.

IAQ equipment supported: As part of an installed system, this air conditioner is compatible with a wide range of IAQ products including filters, humidifiers, UV lights, and electronic air cleaners (EACs). Factory-installed outdoor air temperature sensor.

Thermostat compatibility: Compatible with most thermostats. Five-stage operation and communicating/self-configuring function only when used with the Comfortmaker Ion System Control.

Replacement parts compatibility: Shares replacement parts with other models.

Additional features: When installed as part of a complete Ion communicating system including the Ion System Control, the Comfortmaker CVA9 Ion 19 provides five-stage variable-speed technology in a compact design. Efficiencies up to 19 SEER.

Warranty information: Residential applications: 10-year No Hassle Replacement™ limited warranty (compressor and condenser coil failure only) and 10-year parts limited warranty, including compressor and coil, to original purchaser with timely registration. Parts limited warranty period is five-year parts if not registered within 90 days of installation, except where restricted by jurisdiction. See limited warranty certificate for details and restrictions.

Contact: International Comfort Products, 317-481-5744; www.gocomfortmaker.com.

Serviceability features: Easy-access service valves. External high and low refrigerant service ports. Control panel allows for quicker service access with only two screws. Bi-flow filter-drier included with every unit for easy field installation.

Noise-reduction features: Top-discharge design minimizes noise and improves airflow. To reduce noise at maximum performance, units are equipped with scroll compressors and isolation compressor grommets.

IAQ equipment supported: As part of an installed system, this heat pump is compatible with a wide range of IAQ products including filters, humidifiers, UV lights, and electronic air cleaners (EACs).

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: Up to 18 SEER/13.5 EER cooling efficiency and up to 9.5 HSPF heating efficiency. Two-stage cooling for improved temperature and humidity control. Integrated solid-state controls make the change from heating to cooling go smoothly. New welded aluminum outdoor coil technology will deliver improved corrosion resistance while satisfying future performance requirements.

Warranty information: Residential applications: 10-year parts limited warranty, including compressor and coil, to original purchaser with timely registration. Parts limited warranty period is five-year parts if not registered within 90 days of installation, except where restricted by jurisdiction. See limited warranty certificate for details and restrictions.

Contact: International Comfort Products, 317-481-5744; www.gocomfortmaker.com.

Serviceability features: The LYNX 18 features four removable panels for coil cleaning and a removable fan grille with wires long enough to place the grille on the ground without disconnecting the wires for coil cleaning. The unit control board is separate from the inverter board to allow independent replacement should the need arise. Line set connections are gauge ports that are at a 45° angle, allowing easier connection for refrigerant readings.

Noise-reduction features: Units come standard with rubber mounting grommets for the compressors and an insulated sound blanket. The variable-speed fan motor and true variable-speed compressor operation offer sound levels as low as 60 dBA and up to 72 dBA running at full capacity.

IAQ equipment supported: The LYNX offers five different operating modes, three in cooling operation and two in heating operation, which offer optional enhanced dehumidification for climates that need it. Its ability to pair with variable-speed indoor equipment offers the option to apply additional IAQ accessories.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: Quickly adaptable with a wide range of AHRI- rated system matches. QuickLink™ inverter technology powered by intelligent algorithms. Works with any conventional 24-V thermostat. Energy savings up to 22% annually. Omniguard® total corrosion protection technology and suction line filter-drier extend unit’s life. Quiet Shift™ technology. With ratings up to 18 SEER and 10 HSPF, LYNX offers quiet operation (less than half the sound typically heard from a 14 SEER single- stage heat pump).

Warranty information: Standard five-year parts and compressor warranty with up to 10-year parts and compressor extended coverage with registration.

Special installation requirements: Operating modes, 24-V thermostat, and compatibility with a wide range of indoor equipment.

Contact: Allied Air Enterprises, 8004485872; www.alliedair.com.

Serviceability features: A detachable drain pan allows for easy cleaning.

Noise-reduction features: Manufacturer did not specify.

IAQ equipment supported: New CLEAN operation dries the interior of the indoor unit to reduce the amount of condensation present, while a detachable drain pan allows for easy cleaning.

Thermostat compatibility: Comes with wireless controller. Also has built-in Wi-Fi. Compatible with Daikin One+ smart thermostat, as well as other s21-based Daikin controls.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: Daikin’s first split system product in North America with low-GWP R-32 refrigerant. Delivers up to100% rated cooling capacity at 115°F (46°C) and 100% rated heating capacity at 5°F wet bulb (-15°C wb) with continuous operation as low as -13°F wb (-25°C wb) ambient temperature. Built-in Wi-Fi can be controlled with Daikin Comfort Control App. New hybrid cooling technology efficiently controls humidity, even in low-cooling loads, and maintains dehumidification effect after the target temperature is reached.

Warranty information: Comes with a 12-year parts limited warranty. Complete warranty details available from local dealer or at www.daikincomfort.com. To receive the 12-year parts limited warranty, online registration must be completed within 60 days of installation. Online registration is not required in California or Quebec. If product installed in a commercial application, limited warranty period is five years.

Special installation requirements: Daikin ATMOSPHERA offers installation flexibility with an increase in piping lengths from the factory refrigerant charge and increased maximum piping length for the 9,000 and 12,000 Btu systems, compared to other Daikin single zone systems.

Contact: Daikin Comfort Technologies, 713-861-2500; www.northamerica-daikin.com.

Serviceability features: Simplified maintenance has been engineered into the indoor unit for easier removal of the drain pan, blower wheel, and indoor fan motor (compared to other wall-mounted units). Indoor units include hydrophilic coated coils. Quick Warming function preheats the compressor to shorten the time required to discharge warm air. A sensor performs automatic defrosting of the outdoor heat exchanger if necessary, ensuring optimum heating performance.

Noise-reduction features: Manufacturer did not specify.

IAQ equipment supported: A detachable drain pan provides quick and easy cleaning.

Thermostat compatibility: Includes wireless hand-held remote and compatible with other Daikin controls including DKN Cloud Wi-Fi adaptor.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: The Daikin CIRRA two-zone multi-zone system is ideal for multi-room applications desiring individual room comfort in a space-saving design. With the ability to connect two wall-mounted indoor units to a single outdoor unit, this compact, simple solution can provide additional comfort to spaces where other solutions may not be viable. The small outdoor unit footprint takes up less space on a patio or balcony (compared to other Daikin multi-zone outdoor units).

Warranty information: Ten-year parts limited warranty. Complete warranty details available from local dealer or at www.daikincomfort.com. To receive the 10-year parts limited warranty, online registration must be completed within 60 days of installation. Online registration is not required in California or Quebec.

Special installation requirements: Manufacturer did not specify.

Contact: Daikin Comfort Technologies, 713-861-2500; www.northamerica-daikin.com.

Serviceability features: With the Daikin ONE+ smart thermostat, Daikin One Cloud Services allows Daikin contractors, with customer permission, to monitor, control, diagnose, and commission systems remotely.

Noise-reduction features: Factory-installed, acoustically engineered heavy duty sound control blanket. ECM condenser fan motor provides dependable, quiet airflow across condensing coil.

IAQ equipment supported: The DX/Z20VC outdoor air conditioner or heat pump can be matched with a full line of Clean Comfort branded IAQ products, including air filters, UV purifiers, heat recovery ventilators (HRVs), energy recovery ventilators (ERVs), and humidifiers. The compatible Daikin ONE+ smart thermostat provides both customers and contractors, with customer approval, the ability to detect, visualize, and act on common indoor air quality issues, either automatically or manually.

Thermostat compatibility: Requires a special thermostat. Compatible with Daikin ONE+ smart thermostat.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: The DX/Z20VC provides the latest Daikin Inside Technology for superior air conditioning performance and comfort with an inverter compressor, achieving up to 24.5 SEER. The DX/Z20VC uses the Daikin ONE+ smart thermostat to provide customer with remote monitoring and control of comfort and IAQ. Daikin One Cloud Services allows Daikin contractors, with customer permission, to remotely monitor, control, diagnose, and commission systems remotely.

Warranty information: Standard warranty includes 12-year unit replacement and 12-year parts limited warranty. Complete warranty details available from local dealer or at www.daikincomfort.com. To receive the 12-year parts limited warranty, online registration must be completed within 60 days of installation. Online registration is not required in California or Quebec.

Special installation requirements: TXV required.

Contact: Daikin Comfort Technologies, 713-861-2500; www.northamerica-daikin.com.

Serviceability features: Small footprint allows for easy installation and maintenance. Self-diagnostic control board with diagnostic indicator lights, seven-segment LED display, and fault code storage. Inverter board cooled by refrigerant circuit. Only two low voltage wires to outdoor unit required. Coil and ambient temperature sensors. Suction pressure transducer. Sweat connection service valves with easy access to gauge ports. Daikin One Cloud Services allows Daikin contractors, with customer permission, to remotely monitor, control, diagnose, and commission systems remotely.

Noise-reduction features: Quiet outdoor unit operation sound levels, provided by side discharge fan and Daikin inverter driven compressor, with sound pressure levels as low as 55 dBA, allow for installation flexibility in areas close to lot lines and other sensitive applications where low sound levels are important.

IAQ equipment supported: Daikin One ecosystem compatible with optional air cleaners, humidifiers, dehumidifiers, ultraviolet air purifiers, and fresh air ventilation. The compatible Daikin ONE+ smart thermostat provides customers and contractors, with customer approval, the ability to detect, visualize, and act on common IAQ issues, either automatically or manually. The Daikin One Premium air cleaner with MERV 15 media filter and room temperature catalyst removes formaldehyde, ozone, and more than 85% of particles down to 0.3 microns.

Thermostat compatibility: Requires a special thermostat. Daikin One+ smart thermostat designed specifically for optimization of the Daikin Fit system.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: Daikin Fit is a smart cooling only, gas heat, heat pump or dual fuel HVAC system with matching condenser, controls, gas furnace, and evaporator coil. Daikin Fit systems are engineered with high performing, quiet, Daikin, swing, variable-speed inverter compressors and side discharge cabinet designs that are smaller, lighter, and quieter than traditional residential, unitary, outdoor condensing units. Ducted air handlers, furnaces, and evaporator coils include horizontal, upflow, and downflow configurations.

Warranty information: Backed by a 12-year parts limited warranty and a 12-year unit replacement limited warranty. Complete warranty details available from local dealer or at www.daikincomfort.com. To receive 12-year unit replacement limited warranty and 12-year parts limited warranty, online registration must be completed within 60 days of installation. Additional requirements for annual maintenance are required for the unit replacement limited warranty. Online registration and some of the additional requirements are not required in California or Quebec.

Special installation requirements: Manufacturer did not specify.

Contact: Daikin Comfort Technologies, 713-861-2500; www.northamerica-daikin.com.

Serviceability features: When installed as part of a complete communicating system including the Ion System Control with Wi-Fi capability, the Day & Night® CVH8 Ion 18 heat pump offers more precise system control with remote access, text-based diagnostics, and contractor information displayed. Smaller, lighter design than most two-stage units. Easy-access service valves.

Noise-reduction features: Variable-speed compressor and compact ECM fan motor operate at quieter, lower speeds most of the time (as low as 56 decibels). Soft start and smooth ramp-up to operating speeds. Cabinet includes isolation compressor grommets and a high-performance compressor sound shield for lower noise.

IAQ equipment supported: Compatible with most industry IAQ offerings.

Thermostat compatibility: Compatible with most thermostats. Five-stage operation, communicating and self-configuring functions only available when used with the Day & Night Ion System Control.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: When installed as part of a complete communicating system including the Ion System Control with Wi-Fi capability, the Day & Night CVH8 Ion 18 heat pump provides five-stage variable-speed technology in a compact design. Efficiencies up to 11 HSPF/19 SEER.

Warranty information: Ten-year No Hassle Replacement™ limited warranty. (If compressor or condenser coil fails due to defect during applicable No Hassle Replacement limited warranty time period, one-time replacement with comparable unit will be provided.) Ten-year parts limited warranty to original purchaser with timely registration. Parts limited warranty is five-year parts if not registered within 90 days of installation except in jurisdictions where warranty benefits cannot be conditioned on registration (see warranty certificate for details and restrictions).

Contact: International Comfort Products, 317-481-5744; www.godayandnight.com.

Serviceability features: Easy-access service valves. External high and low refrigerant service ports. Control panel allows for quicker service access with only two screws. Filter-drier supplied with every unit for easy installation.

Noise-reduction features: Top-discharge design minimizes noise and improves airflow. To reduce noise at maximum performance, units are equipped with scroll compressors and isolation compressor grommets.

IAQ equipment supported: As part of an installed system, this air conditioner is compatible with a wide range of IAQ products including filters, humidifiers, UV lights, and electronic air cleaners (EACs). Factory-installed outdoor air temperature sensor.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: Energy Star-qualified with efficiencies up to 18 SEER/14 EER. Scroll compressor provides reliable two-stage cooling for improved temperature and humidity control. Galvanized steel construction protects unit against extreme weather. New welded aluminum outdoor coil technology will deliver improved corrosion resistance while satisfying future performance requirements.

Warranty information: Residential applications: 10-year parts limited warranty, including compressor and coil,

to original purchaser with timely registration. Parts

limited warranty period is five-year parts if not registered within 90 days of installation, except where restricted

by jurisdiction. See limited warranty certificate for details and restrictions.

Contact: International Comfort Products, 317-481-5744; www.godayandnight.com.

Serviceability features: The LYNX 18 features four removable panels for coil cleaning and a removable fan grille with wires long enough to place the grille on the ground without disconnecting the wires for coil cleaning. The unit control board is separate from the inverter board to allow independent replacement should the need arise. Line set connections are gauge ports that are at a 45° angle, allowing easier connection for refrigerant readings.

Noise-reduction features: Units come standard with rubber mounting grommets for the compressors and an insulated sound blanket. The variable-speed fan motor and true variable-speed compressor operation offer sound levels as low as 60 dBA and up to 72 dBA running at full capacity.

IAQ equipment supported: The LYNX offers five different operating modes, three in cooling operation and two in heating operation, which offer optional enhanced dehumidification for climates that need it. Its ability to pair with variable-speed indoor equipment offers the option to apply additional IAQ accessories.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: Quickly adaptable with a wide range of AHRI- rated system matches. QuickLink™ inverter technology powered by intelligent algorithms. Works with any conventional 24-V thermostat. Energy savings up to 22% annually. Omniguard® total corrosion protection technology extend unit’s life. Quiet Shift™ technology. With ratings up to 18 SEER and 10 HSPF, LYNX offers superior performance and quiet operation (less than half the sound typically heard from a 14 SEER single-stage heat pump).

Warranty information: Standard five-year parts and compressor warranty with up to 10-year parts and compressor extended coverage with registration.

Special installation requirements: Operating modes, 24-V thermostat, and compatibility with a wide range of indoor equipment.

Contact: Allied Air Enterprises, 8004485872; www.alliedair.com.

Serviceability features: Through a cellular-based gateway and phone app, the system sets itself up to optimal performance conditions and sends out notifications if those conditions are not maintained. The system parameters can also be changed remotely with the use of the app. The gateway controls include abilities to work within utility load shedding requirements if needed.

Noise-reduction features: Through the app, the system can be set on a quiet mode during times when demand is lower. Sound levels as low as 56 dB can be met.

IAQ equipment supported: Manufacturer did not specify.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: The cellular-based, IoT, two-way technology is unique in the industry. No other product has the ability to make changes in Btu output, sound levels, defrost controls, sensor override, and a list of other items, remotely. When the system is started, the app automatically registers the product, which enables all warranties.

Warranty information: When registered by a certified dealer, the product comes out of the box with 10 years of parts warranty, three years of cellular monitoring and three years of labor. For an additional $599, the monitoring and labor warranty increases to 10 years.

Special installation requirements: The Ecoer app must be downloaded from Apple or Android, free of charge.

Contact: Ecoer HVAC, 480-544-9248; www.ecoer.com.

With energy recovery ventilator (ERV)

Serviceability features: All major components accessible from the front of the unit including the ERV core. The ERV section has a hinged and removeable door for access. The core can be washed with light soapy water.

Noise-reduction features: Double-isolated compressor mount. Whisper-quiet ERV ECM fan motors. Fully insulated cabinet.

IAQ equipment supported: The ERV uses waste/stale air to precondition outside incoming fresh air for ventilation. This will allow for modern, tighter construction that can seal most areas to prevent drafts and air leak loss.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Shares replacement parts with other models.

Additional features: With the fully integrated ERV in a vertical package unit, this one unit can not only heat and cool but also temper incoming air to avoid stale air and CO2 buildup. ERV controls can be set for any application and is app compatible. The self-supporting sleeve can also have the fresh air and exhaust air ports for the ERV. This saves cost of running more piping and exterior penetrations.

Warranty information: One-year parts and five-year compressor.

Special installation requirements: Unit requires sleeve with or without ports and an attractive architectural louver outdoor grille. The grille can be painted to match the outside of the building.

Contact: First Co., 214-388-5751 ext. 1166; www.firstco.com.

Serviceability features: The FSA3BE features a servicer-friendly jacket with removable access panels that gives contractors easy access to all controls and the compressor from the side of the unit. Every access panel may be removed without removing the top grille. Additionally, a removable top grille assembly allows ease of service from the top of the unit without disconnecting fan motor leads.

Noise-reduction features: This model features a composite base pan that is stronger and lighter than steel and absorbs sound.

IAQ equipment supported: Manufacturer did not specify.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Shares replacement parts with other models.

Additional features: This new model will be available summer 2022. The FSA3BE air conditioner has been tested and designed to meet new SEER2 efficiency requirements.

Warranty information: Frigidaire split systems feature an out-of-the box, five-year limited parts warranty, and a one-year Comfort Quality Pledge to replace the entire unit if the compressor fails. Upon equipment registration, both the limited parts warranty and Comfort Quality Pledge coverage extend to 10 years.

Special installation requirements: Manufacturer did not specify.

Contact: Nortek Global HVAC, 800-422-4328; www.nortekhvac.com.

Serviceability features: Designed with easily removable panels for service and maintenance. Minimal clearance on three sides. Only 24-inch clearance on the front

Noise-reduction features: The air handler features low indoor and outdoor units operating sound levels. Indoor units can be as low as 25 dB and outdoor units can be as low as 54 dB.

IAQ equipment supported: Manufacturer did not specify.

Thermostat compatibility: Requires a special thermostat.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: Indoor unit: all-aluminum indoor unit coil; high static pressure, up to 1 inch wg; adaptive fan motor control for optimum indoor comfort; downflow, horizontal right kits provided with each air handling unit (no additional cost); and factory-provided and field-installed electric heat kit, up to 15.5 kW (optional). Outdoor unit: ideal solution for installations with limited space; variable-speed, inverter-driven compressor for optimum operation and comfort; and single fan saves space without compromise.

Warranty information: Standard limited warranty of five-year parts and seven-year compressor. Halcyon systems that have been installed by a licensed contractor and the online product registration has been submitted within 60 days of installation have a 10-year parts and compressor warranty. Halcyon systems that have been installed in a residential application by an Elite Contractor and the online product registration has been submitted have a 12-year parts/compressor warranty.

Special installation requirements: Installation of the air handler system is described in the installation manual.

Contact: Fujitsu General America Inc., 888-888-3424; www.fujitsugeneral.com.

Serviceability features: Electronic controls give clear and fast diagnostics data and fault codes for quick and easy notifications. Additionally, the option to connect with GE Appliances’ SmartHQ module gives property managers the ability to monitor multiple units remotely, enhancing guests’ experience. Learn more at www.smarthqsolutions.com/management.

Noise-reduction features: Delivers quiet cooling power with smooth sound for a good night’s sleep. Based on blind sound jury, 91% of participants rated GE AZ95 units as better sound quality versus a competitor model.

IAQ equipment supported: Manufacturer did not specify.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Manufacturer did not specify.

Additional features: The Zoneline UltimateV10™ addresses common installer concerns and saves 60% on installation time. Innovations that make installation simple and efficient include the Insta-Platform, a one-piece design that fully integrates with the wall plenum and eliminates the need for on-site customized platform construction, as well as self-contained drainage system, and a fast-connect plumbing design.

Warranty information: One-year all replacement parts, labor and related services; five-year sealed refrigerating system, labor, and related services; two- to five-year fan motors, switches, thermostat, heater, heater protectors, compressor overload, solenoids, circuit boards, auxiliary controls, thermistors, frost controls, and freeze sentinel (customer responsible for labor and related services).

Special installation requirements: Manufacturer did not specify.

Contact: GE Appliances Air & Water Solutions, 704-290-3234; geappliancesairandwater.com.

YT024D, YT036D, YT048D, YT060D, YT072D

Serviceability features: The latest version of the YT includes EPIC connected controls, providing valuable insight with energy monitoring, performance data, and diagnostic tools. Other serviceability features include a smaller cabinet footprint; all cabinet panels are easy to remove; high- and low-pressure ports; time-saving unit-mounted flow center (available on unit sizes 3 to 6 tons); and the TXV and filter-drier are located together in the air handler section.

Noise-reduction features: Elastomeric compressor isolation pads and high-density closed-cell foam insulation help absorb sound. This insulation is UL Greenguard certified, meaning improved air quality and no chemical emissions. The variable-speed ECM blower motor matches to ductwork to deliver optimum airflow while operating quietly, and the unit uses Copeland’s UltraTech two-stage scroll compressor.

IAQ equipment supported: IAQ products like RenewAire are compatible with the YT.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: With all the features and benefits of previous revisions, the latest version of the YT includes EPIC connected controls. EPIC works with most pre-existing 24-vac heat pump thermostats and current Wi-Fi network, providing performance data, energy monitoring, and diagnostic tools to homeowners and contractors. Over-the-air updates ensure that each component is future-proofed and running with the latest software. The addition of EPIC qualifies this system for Energy Star Most Efficient.

Warranty information: Standard 10-year warranty on all unit components, 10-year warranty on select accessory items, and a five-year warranty on branded thermostats.

Special installation requirements: The YT with EPIC offers a flexible suite of control and monitoring tools. With an intuitive setup process, universal integration with virtually any 24-vac heat pump thermostat and Wi-Fi router, and powerful professional features, EPIC provides contractors with unparalleled capability that’s easy to install and monitor.

Contact: Enertech Global LLC, 618-664-9010; enertechusa.com.

With Smart Speed™ inverter technology

Serviceability features: Integrated ComfortBridge™ technology provides quick, simplified commissioning and diagnostics via indoor board Bluetooth with the convenient CoolCloud™ mobile application. Works seamlessly with single-stage thermostats or smart home controls, offering freedom of choice. Technician-friendly features include advanced ComfortAlert™ diagnostics with diagnostic indicator lights; seven-segment LED display; fault code storage; factory-installed high/low-pressure switches; and coil/ambient temperature sensors. Contactor with lug connection and ground lug connection; top/side maintenance access; and sweat connection service valves with easy access to gauge ports.

Noise-reduction features: Goodman inverter systems operate at lower sound levels without the constant on/off of single- and two-stage systems, giving homeowners superior levels of acoustical comfort compared to single-stage and two-stage systems. A quiet DC outdoor fan motor, the high-density compressor sound blanket, and an acoustically engineered sound-control top help reduce noise.

IAQ equipment supported: Compatible with IAQ equipment including the Clean Comfort Indoor Air Essentials line of filtration, humidification, dehumidification, purification, ventilation, and zoning products. Space is provided for field-installed accessories.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: Smart Speed inverter technology automatically adjusts speeds of the compressor and condensing fan motor based on cooling demand. For outstanding heat transfer and energy-efficient performance, the GVXC20 utilizes Goodman SMARTCOIL™ technology, featuring a smaller, smarter copper tube coupled with an enhanced aluminum fin coil that increases the heat absorption area. Pioneering ComfortBridge communicating technology continuously monitors system performance for customized indoor comfort. All Goodman indoor comfort products are designed, engineered, and assembled in the USA.

Warranty information: Lifetime compressor limited warranty, 10-year unit replacement limited warranty, and 10-year parts limited warranty. Complete warranty details are available from local dealer or at goodmanmfg.com.

Special installation requirements: In communicating mode, only two low-voltage wires to outdoor unit are required. A color-coded terminal strip for non-communicating setup is included. Field-selectable boost mode can be used to increase compressor speed during unusually high loads. Field-installed, factory-provided, bi-flow filter-drier. Comes fully charged for 15 feet of tubing length.

Contact: Goodman Mfg. Co. L.P., 281-536-6063; goodmanmfg.com.

With Smart Speed™ inverter technology

Serviceability features: ComfortBridge™ technology enables technicians to connect, configure, and diagnose quickly and accurately via indoor board Bluetooth using CoolCloud™ mobile application. ComfortBridge works seamlessly with single-stage thermostats or smart home controls. Customized control algorithms; diagnostic indicator lights; seven-segment LED display; and fault code storage. Factory-installed suction line accumulator; compressor crankcase heater; high-capacity muffler; and high/low-pressure switches. Coil/ambient temperature sensors. Suction pressure transducer. Top/side maintenance access; sweat connection service valves with easy gauge port access; and single-panel access to controls.

Noise-reduction features: GVZC20 heat pumps provide superior levels of acoustical comfort both indoors and out by operating at lower sound levels without the constant on/off of single- and two-stage systems. The top performance of a variable-speed ECM motor allows for a wide range of fan speeds, from 0% to 100%, depending on airflow needs. A quiet DC outdoor fan motor plus an acoustically engineered, high-density sound-control blanket and Goodman sound control top reduce noise further.

IAQ equipment supported: Compatible with IAQ equipment including the Clean Comfort® Indoor Air Essentials line of filtration, humidification, dehumidification, coil and air purification, ventilation, zoning, and damper products.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: Goodman inverter-driven systems with Smart Speed technology help prevent common temperature swings experienced with single- and two-stage units, while reaching indoor comfort settings quicker and continually dehumidifying the home to balance heat load. Increased efficiencies conserve energy and help reduce compressor wear. Copper coil tubing with enhanced aluminum fins increases the heat absorption area for exceptional heat transfer performance. Like all Goodman brand products, the GVZC20 is designed, engineered, and assembled in the USA.

Warranty information: Lifetime compressor limited warranty; 10-year unit replacement limited warranty; and 10-year parts limited warranty. Complete warranty details are available at goodmanmfg.com. Online registration not required in California or Quebec.

Special installation requirements: In communicating mode, only two low-voltage wires to the outdoor unit are required. Contractors can securely connect wires with large screw lugs, allowing for quick and solid wiring. A factory-provided bi-flow filter-drier must be installed in the field. Comes fully charged with refrigerant sufficient for 15 feet of tubing length to assist with easy installation of unit. Field-selectable boost mode can be used to increase compressor speed during unusually high loads.

Contact: Goodman Mfg. Co. L.P., 2815366063; goodmanmfg.com.

Serviceability features: The HVA9 Ion 19 offers precise system control with remote access (requires Wi-Fi connection and mobile app), text-based diagnostics, and contractor name/information displayed (when installed as part of a complete Ion™ communicating system including the Ion System Control).

Noise-reduction features: Variable-speed compressor and compact ECM fan motor designed to operate at quieter (as low as 56 decibels), lower speeds most of the time. Soft start and smooth ramp-up to operating speeds. Cabinet includes isolation compressor grommets and a high-performance compressor sound shield for lower noise.

IAQ equipment supported: As part of an installed system, this air conditioner is compatible with a wide range of IAQ products including filters, humidifiers, UV lights, and electronic air cleaners (EACs). Factory-installed outdoor air temperature sensor.

Thermostat compatibility: Compatible with most thermostats. Five-stage operation and communicating/self-configuring function only when used with the Heil® Ion System Control.

Replacement parts compatibility: Shares replacement parts with other models.

Additional features: When installed as part of a complete Ion communicating system including the Ion System Control, the Heil HVA9 Ion 19 provides five-stage variable-speed technology in a compact design. Efficiencies up to 19 SEER.

Warranty information: Residential applications: 10-year No Hassle Replacement™ limited warranty (compressor and condenser coil failure only) and 10-year parts limited warranty, including compressor and coil, to original purchaser with timely registration. Parts limited warranty period is five-year parts if not registered within 90 days of installation, except where restricted by jurisdiction. See limited warranty certificate for details and restrictions.

Contact: International Comfort Products, 317-481-5744; www.goheil.com.

Serviceability features: Easy-access service valves. External high and low refrigerant service ports. Control panel allows for quicker service access with only two screws. Bi-flow filter-drier included with every unit for easy field installation.

Noise-reduction features: Top-discharge design minimizes noise and improves airflow. To reduce noise at maximum performance, units are equipped with scroll compressors and isolation compressor grommets.

IAQ equipment supported: As part of an installed system, this heat pump is compatible with a wide range of IAQ products including filters, humidifiers, UV lights, and electronic air cleaners (EACs).

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: Up to 18 SEER/13.5 EER cooling efficiency and up to 9.5 HSPF heating efficiency. Two-stage cooling for improved temperature and humidity control. Integrated solid-state controls make the change from heating to cooling go smoothly. New welded aluminum outdoor coil technology will deliver improved corrosion resistance while satisfying future performance requirements.

Warranty information: Residential applications: 10-year parts limited warranty, including compressor and coil, to original purchaser with timely registration. Parts limited warranty period is five-year parts if not registered within 90 days of installation, except where restricted by jurisdiction. See limited warranty certificate for details and restrictions.

Contact: International Comfort Products, 317-481-5744; www.goheil.com.

Serviceability features: Reliable performance requires durable materials. Outdoor units are constructed with metal casings that are both fireproof and rustproof. A special anti-corrosion coating lengthens condenser life, improves performance and durability, and reduces the need for maintenance — even in coastal environments.

Noise-reduction features: Sound pressure levels are as low as 27 dBA.

IAQ equipment supported: FrostWash is an innovative new feature that freezes dew that naturally accumulates on the heat exchanger, trapping impurities in place. It then melts the frost, washing the impurities safely down the drain. The result is a clean, hygienic surface, removing 99% of bacteria, 99% of virus. and 95% of mold from unit interior (tested by Kitasato Research Center of Environmental Science, test no. 2020_0650: anti-bacterial, anti-mold, and anti-virus effects when operating FrostWash one time).

Thermostat compatibility: Requires a special thermostat.

Replacement parts compatibility: Manufacturer did not specify.

Additional features: ECO mode automatically shifts the set temperature to reduce energy consumption. Unique human-sensing capability monitors activity and adjusts temperature accordingly.

Warranty information: Standard warranty: five-year compressor and seven-year parts. Extended warranty: 10-year compressor and 10-year parts with registration and in residential applications. Extended warranty with labor: 12-year compressor, 10-year parts, and 10-year labor with upgrade purchase.

Special installation requirements: Manufacturer did not specify.

Contact: Johnson Controls Hitachi, 832-592-3059; us.hitachiaircon.com.

Serviceability features: PRIMAIRY units are self-diagnosing when it comes to components that could malfunction due to unforeseen circumstances. Both indoor and outdoor units have two control boards, and the outdoor unit has added coil sensors to ensure proper operation (especially during defrosting and discharge protection). This not only helps to monitor the defrosting effect in real-time but also helps reduce repair costs if the PC board fails. A washable filter allows for cost-saving maintenance.

Noise-reduction features: The outdoor DC motor has 16 steps of automatic adjustment to reduce fan speed and frequency of movement, leading to reduced noise. Adopting advanced control technology and high-quality silent motor by optimizing the air duct, the indoor unit achieves better airflow distribution and significant airflow increase without increasing sound level and power consumption. This may even achieve ultra-low noise level in quiet mode for some models.

IAQ equipment supported: The fresh air inlet can bring outside air in, helping to maintain indoor air quality.

Thermostat compatibility: Requires a special thermostat.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: PRIMAIRY units ensure the performance of critical refrigerant circulation components. When refrigerant volume is less than 30%, the unit automatically registers this and displays the relevant fault code, prompting the required maintenance. Up to 164 feet (50 meters) in pipe length can be covered when the unit is being installed and up to 98 feet (30 meters) in height, depending on individual needs.

Warranty information: Standard warranty: seven-year compressor and five-year parts. Extended warranty: 10-year compressor and 10-year parts.

Special installation requirements: PRIMAIRY system with multiple outdoor unit options available. Each is modular and easy to install in a variety of settings.

Contact: Johnson Controls Hitachi, 414-208-8849; us.hitachiaircon.com.

Serviceability features: The CVA9 Ion 19 offers precise system control with remote access (requires Wi-Fi connection and mobile app), text-based diagnostics, and contractor name/information displayed (when installed as part of a complete Ion communicating system including the Ion System Control).

Noise-reduction features: Variable-speed compressor and compact ECM fan motor designed to operate at quieter (as low as 56 decibels), lower speeds most of the time. Soft start and smooth ramp-up to operating speeds. Cabinet includes isolation compressor grommets and a high-performance compressor sound shield for lower noise.

IAQ equipment supported: As part of an installed system, this air conditioner is compatible with a wide range of IAQ products including filters, humidifiers, UV lights, and electronic air cleaners (EACs). Factory-installed outdoor air temperature sensor.

Thermostat compatibility: Compatible with most thermostats. Five-stage operation and communicating/self-configuring function only when used with the KeepRite® Ion System Control.

Replacement parts compatibility: Shares replacement parts with other models.

Additional features: When installed as part of a complete Ion communicating system including the Ion System Control, the KeepRite CVA9 Ion 19 provides five-stage variable-speed technology in a compact design. Efficiencies up to 19 SEER.

Warranty information: Residential applications: 10-year No Hassle Replacement™ limited warranty (compressor and condenser coil failure only) and 10-year parts limited warranty, including compressor and coil, to original purchaser with timely registration. Parts limited warranty period is five-year parts if not registered within 90 days of installation, except where restricted by jurisdiction. See limited warranty certificate for details and restrictions.

Contact: International Comfort Products, 317-481-5744; www.gokeeprite.com.

Serviceability features: Easy-access service valves. External high and low refrigerant service ports. Control panel allows for quicker service access with only two screws. Bi-flow filter-drier included with every unit for easy field installation.

Noise-reduction features: Top-discharge design minimizes noise and improves airflow. To reduce noise at maximum performance, units are equipped with scroll compressors and isolation compressor grommets.

IAQ equipment supported: As part of an installed system, this heat pump is compatible with a wide range of IAQ products including filters, humidifiers, UV lights, and electronic air cleaners (EACs).

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: Up to 18 SEER/13.5 EER cooling efficiency and up to 9.5 HSPF heating efficiency. Two-stage cooling for improved temperature and humidity control. Integrated solid-state controls make the change from heating to cooling go smoothly. New welded aluminum outdoor coil technology will deliver improved corrosion resistance while satisfying future performance requirements.

Warranty information: Residential applications: 10-year parts limited warranty, including compressor and coil, to original purchaser with timely registration. Parts limited warranty period is five-year parts if not registered within 90 days of installation, except where restricted by jurisdiction. See limited warranty certificate for details and restrictions.

Contact: International Comfort Products, 317-481-5744; www.gokeeprite.com.

Serviceability features: When installed with the S30 Ultra Smart thermostat, this unit can provide system performance information and error codes in real time, allowing the servicing contractor to remotely troubleshoot and change settings. Maintenance is further simplified with a proprietary cabinet design and SmartHinge™ louvered panels that can be removed for easy cleaning and access to the compressor and other components, unlike other units. The PermaGuard™ unit base and galvanized steel powder finish also ensure lasting durability.

Noise-reduction features: The SL25XPV heat pump has been engineered with a variable-capacity compressor to run primarily in low speed — drastically minimizing the sound of air kicking on or off inside the home. A sound-dampening system with a precision-balanced, direct-drive fan absorbs outdoor noise for a smooth operation at a volume as quiet as 55 dB, or the sound of a microwave. SilentComfort™ technology combines advanced engineering with sound-absorbing insulation to deliver the ultimate in quiet performance.

IAQ equipment supported: Part of the Ultimate Comfort System™, the SL25XPV heat pump delivers consistently clean, perfect air when connected with the IAQ component of the system, the PureAir™ S Air Purification System, which is a smart whole-home solution that combats

particles, germs and odors. With the Lennox Healthy Climate™ Carbon Clean 16® air filter, the system removes over 99% of the virus that causes COVID-19 from the air (learn more at lennox.com/perfectair).

Thermostat compatibility: Requires a special thermostat.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: Utilizing TruHeat performance, the SL25XPV delivers a greater amount of heat than traditional heat pumps for rich, warm comfort. It’s also incredibly efficient, which allows it to deliver substantial energy savings. It was designated as one of the Most Efficient Energy Star-certified products in 2022. Precise Comfort® technology finely tunes and adjusts heating and cooling output in tiny increments, perfectly matching energy use with owner comfort, making it one of the highest-efficiency, variable-capacity heat pumps available.

Warranty information: Ten-year limited warranty on covered components including the compressor. Coverage can be customized with the newly launched Warranty Your Way™ limited warranty offering. Homeowners have the opportunity to obtain the default two-year parts-only extension (for a total of 12-year parts-only coverage) or, in lieu of that option, they can receive three years of labor coverage (for a total of 10-year parts and three-year labor).

Special installation requirements: Must be installed with the S30 thermostat and Lennox iComfort-enabled furnace and/or air handler. Unit has the ability to provide superheat, subcooling, refrigerant temperature, and refrigerant pressure measurements on the setup app, S30, or remotely on Service Dashboard so taking measurements while charging the unit is not necessary. These readings are available real-time at any time on the Service Dashboard and can be referenced in the future if service is needed.

Contact: Lennox Industries; www.lennox.com.

With heat recovery, ARUB060GSS4

Serviceability features: Available with LG’s exclusive Smart Diagnosis™ function, users will receive maintenance alerts for better service should issues arise. LG’s ThinQ® app can be setup to send reminders when filters need to be cleaned on an established schedule, allowing users to proactively schedule maintenance with their authorized LG representative.

Noise-reduction features: The Multi V S uses a variable-speed compressor, operating more quietly and using less energy than conventional air conditioners in the same conditions. Additionally, the outdoor unit’s compressor is mounted on vibration attenuating rubber grommets to reduce vibration, which also helps to reduce noise levels. Indoor units can operate in interior spaces with rated sound levels as low as 23 dBA.

IAQ equipment supported: Compatible with LG energy recovery ventilator (ERV) systems, which bring outside air indoors to improve air quality without sacrificing energy efficiency.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: Multi V S is a compact, yet powerful, single-phase VRF solution for residential and light commercial applications. Heat recovery brings simultaneous cooling and heating technology and enhanced energy efficiency, when compared to conventional air conditioners, to homeowners and small building owners, so that they can enjoy higher comfort levels and energy efficiencies that were previously only available to larger commercial projects.

Warranty information: Standard limited warranty program for a qualified system: one-year parts and additional six-year compressor after the end of the applicable standard part warranty period. The standard limited warranty period and compressor limited warranty period may be extended to a total of 10 years for qualified, registered systems that have been commissioned in accordance with the limited warranty’s terms and conditions. For warranty details, visit lghvac.com

Special installation requirements: LG Multi V air-source VRF units are engineered to be installed outdoors. These outdoor units require sufficient space to ensure proper airflow, operation, and maintenance/service access. When installing outdoor units, allowable service, inlet, outlet, and space requirements must be considered. If the installation space is too tight around the outdoor units, then the system can malfunction.

Contact: LG Electronics, 917-664-1758; www.lghvac.com.

Serviceability features: Heat pumps offer easier access for service checks, making routine maintenance faster. The systems are also compatible with conventional equipment and devices.

Noise-reduction features: Developed using CFD and FEA tools, the sturdy cabinet, composite swept-wing fan blade, and side-flow air combine to provide sound performance as low as 54 dBA, which is 36% lower volume level than standard vertical discharge heat pumps.

IAQ equipment supported: Luxaire® offers a complete range of humidifiers, dehumidifiers, air filters, and ultraviolet air purifiers that are compatible with the Luxaire HMH7 heat pump. These products maintain optimal humidity levels and clean indoor air to alleviate irritations associated with dry or stale air, and health problems resulting from bacteria and airborne viruses.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: The HMH7 17 SEER horizontal discharge heat pump is designed from the ground up to provide all the comfort and technology of a mid-tier efficiency unit at the cost of a base-tier vertical unit. Modulating technology continuously adjusts to offset the rate of heat leaving your home, maximizing comfort and reducing energy bills. It’s an ideal solution for homes in temperate regions that require a compact design, without any sacrifices in comfort or efficiency.

Warranty information: With registration, 10-year compressor limited warranty and 10-year parts limited warranty for years of worry-free comfort.

Special installation requirements: A kit containing a bi-flow filter-drier, and an indoor relay and wire harness are required for installation.

Contact: Johnson Controls, 414-344-8594; www.luxaire.com.

Serviceability features: The heat pump features a large electrical box cover and a swing-open electrical box to provide superior full corner access to the inside of the unit for maintenance or service. Angled service ports allow for ample access for zero loss line sets. A removable fan guard provides all top access without removing the entire unit top.

Noise-reduction features: Developed using CFD and FEA tools, the sturdy cabinet and top design provides sound performance of 76 dBA or lower. Compatible accessories for further sound reduction are also available.

IAQ equipment supported: Optional system-matched equipment is available to deliver IAQ achievements including humidifiers, dehumidifiers, and UV-C lighting.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: The LX Series TH6 heat pump is Luxaire®’s highest performing, single-stage heat pump. Designed to deliver year-round comfort, the Energy Star-qualifying 16 SEER efficiency means lower energy bills. This split-system heat pump is specifically designed to be matched with Luxaire indoor coils, furnaces, and air handlers for a complete system solution. An advanced control system, Demand Defrost, minimizes defrost cycles, reducing energy costs while maintaining comfort.

Warranty information: One-year labor limited warranty and 10-year parts and compressor limited warranty on registered units.

Special installation requirements: Due to the high efficiency nature of the product, it uses a TXV for refrigerant control both indoors and outdoors. A crankcase heater and suction accumulator protect the compressor across its band of operation and from any anomalous occurrences that could damage the system such as dirty filters.

Contact: Johnson Controls, 414-344-8594; www.luxaire.com.

Serviceability features: The air handler offers enhanced efficiency, easy installation, and simplified service. The indoor unit features 1-inch, R4.2 fiberglass-free insulation, reducing condensation on the outside of the cabinet and preventing sweating and the damage that can come from the excess moisture. Unique blow-through design allows simple coil cleaning when the blower is removed. Internal components are easily accessible through clearly marked panels. Horizontal or vertical installation options meets service and physical installation needs.

Noise-reduction features: The air handler is supremely quiet, offering sound levels as low as 27 dBA. The system employs inverter-driven compressor technology, eliminating the excess sound associated with a conventional system’s start and stop cycle. The efficient ECM is fully enclosed within the cabinet and features curved fan blades, contributing to reduced noise levels.

IAQ equipment supported: Heat pump systems improve IAQ through filtration and the integration of ventilation and humidity management equipment. The PVA ducted air handler offers optional humidifier and energy recovery ventilator (ERV) control. Units can also be equipped with high-efficiency filters up to MERV 13 to reduce airborne contaminants and allergens. Installed zone-by-zone, the air handler requires minimal ductwork, reducing the potential for dust and pollutant accumulation.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Shares replacement parts with other models.

Additional features: Compact and versatile, the intelli-AIR PVA ducted air handler provides effective heating and cooling for both new builds and retrofits. The PVA model offers high-performance conditioning for a whole home or several large zones. Each cabinet is carefully constructed for easy installation, simplified maintenance, and minimized sound levels. Advanced DC motors within the unit provide quiet operation as low as 27 dBA. Maximizing available living space, the PVA can be installed horizontally or vertically.

Warranty information: Parts are warrantied for five years to original owner. Compressor is warrantied for seven years to the original owner. Parts and compressor are warrantied for 10 years to original owner, if system installed and registered within 90 days of installation. Parts and compressor are warrantied for 12 years to original owner residing in the home, if system installed by Diamond Contractor® and registered within 90 days of installation.

Special installation requirements: Manufacturer did not specify.

Contact: Mitsubishi Electric Trane HVAC US (METUS), 855-923-3631; www.mitsubishicomfort.com.

Serviceability features: Maintenance-centered design enhances serviceability, which promotes optimal performance and long life. Hinged control service access door. Pocket handles facilitate access to compressor and other components.

Noise-reduction features: In cooling and heating mode, fan speed dBA at 3 minutes is 62 Hz. In simultaneous heating and cooling (SHC) mode, fan speed dBA at 3 minutes is 60 Hz (condenser fan does not run in SHC mode).

IAQ equipment supported: Hydronic fan coils better address humidity with lower coil temperatures.

Thermostat compatibility: Manufacturer did not specify.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: The MHRC allows 100% capture of the refrigeration process waste heat that is normally rejected into the air. The unit will operate in dedicated cooling, heating, or water-to-water simultaneous heating and cooling modes. With this new, innovative system, it is possible to cool rooms, as well as heat showers, sinks, and a swimming pool with the same outdoor unit, thereby eliminating the need for and cost of traditional water heating methods.

Warranty information: MHRC chiller parts are warrantied to be free from manufacturing defects for up to 12 months from the date of installation. The compressor and heat exchangers are warranted for five years from the date of installation.

Special installation requirements: All installations will require dedicated internet access for troubleshooting.

Contact: MULTIAQUA INC, 864-850-8990; www.multiaqua.com.

RP1736HJVXA (heat pump) and RHMV3621MNACJA (air handler)

Serviceability features: The side discharge heat pump allows for flexible installation in tight outdoor spaces with a minimum clearance of only 21 inches on three sides. The three-way multi-position air handler provides installers with multiple options for indoor configuration.

Noise-reduction features: The air handler is designed with a sturdy steel cabinet with 1 inch of foil-faced insulation, offering excellent thermal and sound insulation to keep indoor environments quiet. By adjusting to comfort requirement and running at lower speeds throughout the day, the heat pump can streamline airflow and reduce vibration, allowing for a much quieter outdoor operation than conventional outdoor units.

IAQ equipment supported: Air handler cabinet complies with ASHRAE Standard 193 for less than 2% air leakage. Optional media filter cabinet can be added to the air handler.

Thermostat compatibility: Thermostat converter kit allows system to operate with third-party thermostats.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: In addition to energy- and space-saving features, this system provides the right amount of heating and cooling under all conditions for dependable comfort and energy savings year-round. The air handler features a high-efficiency, constant cfm, variable-speed motor with modulating airflow to manage humidity levels. When matched with the heat pump, the system can run at speeds that meet the requirements of the home — providing even temperatures and eliminating continuous thermostat adjustments.

Special installation requirements: Both liquid and suction lines must be insulated. Full installation training is available.

Contact: Rheem Mfg. Co., 312-565-0044; www.rheem.com.

Serviceability features: The heat pump is designed with PlusOne® triple service access. The unit is 15 inches wide with industry-leading corner service access – making repairs easier and faster. The three-fastener removable corner allows optimal access to internal unit components, while individual louver panels come out once the fastener is removed, which allows for faster coil cleaning and easier cabinet reassembly.

Noise-reduction features: Designed with a swept wing fan blade, the heat pump utilizes the latest technology in outdoor fans, increasing efficiency and reducing air noise. Additionally, ferrite rings keep any electrical noise contained. All units have been sound tested in a sound chamber to AHRI 270 rating conditions, and A-weighted sound power level tables were produced, ensuring units have acceptable noise qualities.

IAQ equipment supported: The compressor provides superior performance and reliability. Variable speeds allow the unit to adapt to surrounding conditions with more precision and efficiency, avoiding temperature fluctuations. Since the variable-speed system is efficiently adjusting to heating and cooling needs, it’s also able to deliver humidity and indoor air quality control that is not possible with standard on/off single-stage designs.

Thermostat compatibility: Requires a special thermostat.

Replacement parts compatibility: Shares replacement parts with other models.

Additional features: The Ultra Series variable-speed heat pump offers solid technology and energy-saving performance. The unit provides cooling efficiencies up to 54% higher and heating efficiencies up to 58% higher than typical heat pump designs. This Energy Star unit adapts quickly and consistently to heating/cooling needs regardless of conditions outside. Additionally, the smart new composite base pan contributes to sound levels as low as 59 dBA.

Warranty information: Ruud will furnish a replacement for any part of this product that fails in normal use and service within the applicable period stated, in accordance with the terms of the limited warranty. Ten-year conditional unit replacement (registration required) and 10-year parts.

Special installation requirements: Manufacturer did not specify.

Contact: Ruud, 312-565-0044; www.ruud.com.

Serviceability features: The user-friendly air-to-water heat pump features touch screen control with simple wiring/piping configurations.

Noise-reduction features: Heat pump features low amp draw with ultra-quiet operation. Modulating fans and inverter compressor match load and minimize noise.

IAQ equipment supported: Manufacturer did not specify.

Thermostat compatibility: Manufacturer did not specify.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: The heat pump provides cooling at low ambient temperatures, as well as an abundance of heat for shoulder seasons. The variable-speed inverter compressor and modulating fans match system loads for optimal energy efficiency. The SIM keeps all refrigerant outside the occupied space.

Warranty information: Parts are warrantied for a period of two years to the original system owner. The compressor is warrantied for a period of five years to the original system owner. If the system is installed in a residential single-family home by a SpacePak-certified contractor, the parts will be warrantied for five years and the compressor for a period of 10 years. See warranty statement for complete details.

Special installation requirements: The SIM air-to-water heat pump follows normal hydronic practices for installation. No refrigerant certification is required.

Contact: SpacePak Inc., 413-568-9571; www.spacepak.com.

Serviceability features: Manufacturer did not specify.

Noise-reduction features: Manufacturer did not specify.

IAQ equipment supported: Electronically controlled variable-speed fans are located on the outside unit to keep decibel levels at a comfortable level.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Manufacturer did not specify.

Additional features: SpacePak’s newest air-to-water heat pump system incorporates ultra-high-efficiency inverter technology to operate up to 30% more efficiently than traditional heat pumps. The heat pumps use Panasonic EVI inverter compressors for optimum performance at temperatures down to -22°F. Units seamlessly adjust output for specific load-matching through modulation while maintaining precision temperature control. The EC-controlled modulating fan motors and integral control platform eliminate start/stop cycling, resulting in superior performance with less wear and tear.

Warranty information: Installations by certified SpacePak technicians receive five-year parts and 10-year compressor. Installations by a non-SpacePak certified technician receive two-year parts and one-year compressor.

Special installation requirements: Must be installed by contractor certified in refrigeration.

Contact: SpacePak, 413-568-9571; www.spacepak.com.

Serviceability features: Easy-access service valves. External high and low refrigerant service ports. Control panel allows for quicker service access with only two screws. Filter-drier supplied with every unit for easy installation.

Noise-reduction features: Top-discharge design minimizes noise and improves airflow. To reduce noise at maximum performance, units are equipped with scroll compressors and isolation compressor grommets.

IAQ equipment supported: As part of an installed system, this air conditioner is compatible with a wide range of IAQ products including filters, humidifiers, UV lights, and electronic air cleaners (EACs). Factory-installed outdoor air temperature sensor.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: Energy Star-qualified with efficiencies up to 18 SEER/14 EER. Scroll compressor provides reliable two-stage cooling for improved temperature and humidity control. Galvanized steel construction protects unit against extreme weather. New welded aluminum outdoor coil technology will deliver improved corrosion resistance while satisfying future performance requirements.

Warranty information: Residential applications: 10-year parts limited warranty, including compressor and coil, to original purchaser with timely registration. Parts limited warranty period is five-year parts if not registered within 90 days of installation, except where restricted by jurisdiction. See limited warranty certificate for details and restrictions.

Contact: International Comfort Products, 317-481-5744; www.gotempstar.com.

Serviceability features: When installed as part of a complete communicating system including the Ion System Control with Wi-Fi capability, the Tempstar® TVH8 Ion 18 heat pump offers more precise system control with remote access, text-based diagnostics, and contractor information displayed. Smaller, lighter design than most two-stage units. Easy-access service valves.

Noise-reduction features: Variable-speed compressor and compact ECM fan motor operate at quieter, lower speeds most of the time (as low as 56 decibels). Soft start and smooth ramp-up to operating speeds. Cabinet includes isolation compressor grommets and a high-performance compressor sound shield for lower noise.

IAQ equipment supported: Compatible with most industry IAQ offerings.

Thermostat compatibility: Compatible with most thermostats. Five-stage operation, communicating and self-configuring functions only available when used with the Tempstar Ion System Control.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: When installed as part of a complete communicating system including the Ion System Control with Wi-Fi capability, the Tempstar TVH8 Ion 18 heat pump provides five-stage variable-speed technology in a compact design. Efficiencies up to 11 HSPF/19 SEER.

Warranty information: Ten-year No Hassle Replacement™ limited warranty. (If compressor or condenser coil fails due to defect during applicable No Hassle Replacement limited warranty time period, one-time replacement with comparable unit will be provided.) Ten-year parts limited warranty to original purchaser with timely registration. Parts limited warranty is five-year parts if not registered within 90 days of installation except in jurisdictions where warranty benefits cannot be conditioned on registration (see warranty certificate for details and restrictions).

Contact: International Comfort Products, 317-481-5744; www.gotempstar.com.

Serviceability features: The XV20 heat pump features Trane Link, a revolutionary technology that simplifies installation, commissioning, and remote monitoring of variable-speed HVAC systems. Created to provide technicians with a “plug and play” experience, it assists with installation accuracy through automated configuration, charging, and system testing. It works with remote monitoring to provide quicker solutions and more efficient service calls. Trane Link provides the exact data technicians need for installation and troubleshooting on their own smart devices.

Noise-reduction features: Sound-insulated compressor reduces operating noise for a quieter home environment.

IAQ equipment supported: Works in conjunction with the Trane CleanEffects whole home air cleaner to remove 99.89% of airborne pollutants, including dust mites, smoke, pet dander, and viruses.

Thermostat compatibility: Requires a special thermostat.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: The new Trane XV 20, as well as the XV 18, have been developed for an all-new lineup of Trane Link communicating equipment that will be available nationwide in Fall 2022. These models have dual capability to operate with all existing ComfortLink II variable-speed indoor equipment and controls, as well as the Trane Link air handlers and smart thermostat that will be available later this year.

Warranty information: Limited warranty, registered: 12-year compressor and 10-year coil and functional parts. Non-registered: five-year compressor and five-year coil and functional parts.

Special installation requirements: Manufacturer did not specify.

Contact: Trane Residential, 844-529-8237; trane.com/residential.

Serviceability features: Heat pumps offer easier access for service checks, making routine maintenance faster. The systems are also compatible with conventional equipment and devices.

Noise-reduction features: Developed using CFD and FEA tools, the sturdy cabinet, composite swept-wing fan blade, and side-flow air combine to provide sound performance as low as 54 dBA, which is 36% lower volume level than standard vertical discharge heat pumps.

IAQ equipment supported: YORK® offers a complete range of humidifiers, dehumidifiers, air filters, and ultraviolet air purifiers that are compatible with the HMH7 heat pump. These products maintain optimal humidity levels and clean indoor air to alleviate irritations associated with dry or stale air and health problems resulting from bacteria and airborne viruses.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: The HMH7 17 SEER horizontal discharge heat pump is designed from the ground up to provide all the comfort and technology of a mid-tier efficiency unit at the cost of a base-tier vertical unit. Modulating technology continuously adjusts to offset the rate of heat leaving your home, maximizing comfort and reducing energy bills. It’s an ideal solution for homes in temperate regions that require a compact design, without any sacrifices in comfort or efficiency.

Warranty information: With registration, HMH7 heat pumps come with a 10-year compressor limited warranty and 10-year parts limited warranty for years of worry-free comfort.

Special installation requirements: A kit containing a bi-flow filter-drier and an indoor relay and wire harness are required for installation.

Contact: Johnson Controls, 414-344-8594; www.york.com.

Serviceability features: The heat pump features a large electrical box cover and a swing-open electrical box to provide superior full corner access to the inside of the unit for maintenance or service. Angled service ports allow for ample access for zero loss line sets. A removable fan guard provides all top access without removing the entire unit top.

Noise-reduction features: Developed using CFD and FEA tools, the sturdy cabinet and top design provides sound performance of 76 dBA or lower. Compatible accessories for further sound reduction are also available.

IAQ equipment supported: Optional system-matched equipment is available to deliver IAQ achievements including humidifiers, dehumidifiers, and UV-C lighting.

Thermostat compatibility: Compatible with most thermostats.

Replacement parts compatibility: Some shared parts and some unique parts.

Additional features: The LX Series YHG heat pump is YORK®’s highest performing, single-stage heat pump. Designed to deliver year-round comfort, the Energy Star-qualifying 16 SEER efficiency means lower energy bills. This split-system heat pump is specifically designed to be matched with YORK indoor coils, furnaces, and air handlers for a complete system solution. An advanced control system, Demand Defrost, minimizes defrost cycles, reducing energy costs while maintaining comfort.

Warranty information: One-year labor limited warranty and 10-year parts and compressor limited warranty on registered units.

Special installation requirements: Due to the high efficiency nature of the product, it uses a TXV for refrigerant control both indoors and outdoors. A crankcase heater and suction accumulator protect the compressor across its band of operation and from any anomalous occurrences that could damage the system such as dirty filters.

Contact: Johnson Controls, 414-344-8594; www.york.com.

You must have JavaScript enabled to enjoy a limited number of articles over the next 30 days.

Sponsored Content is a special paid section where industry companies provide high quality, objective, non-commercial content around topics of interest to The News audience. All Sponsored Content is supplied by the advertising company and any opinions expressed in this article are those of the author and not necessarily reflect the views of The News or its parent company, BNP Media. Interested in participating in our Sponsored Content section? Contact your local rep!

On Demand Don’t miss your chance to learn from industry thought leaders and gain valuable insight on how the A2L transition will affect your HVAC business!

Please join Trent Davis and Eddie Chavez as they share insights on the Low GWP Refrigerant Transition, including the overall impact and what it means for you and your business.

Copyright ©2024. All Rights Reserved BNP Media.

Residential Cooling Showcase 2022 | 2022-04-25 | ACHR News

Battery Busbar Connector Design, CMS, Hosting & Web Development :: ePublishing