Canon unveils its first-ever digital laser rangefinder which can actually shoot and record rounds of golf.
Full disclosure—I’m fully aware that this is hardly a filmmaking device, but I think it’s cool so I’m going to write about it anyway. Canon has announced their first ever Canon PowerShot GOLF Digital Laser Rangefinder and I’m so here for it. Gsm Trail Camera
Yes, it’s a rangefinder designed for golfers to get accurate distance measurements as they (read: me) line up their shots while out on the golf course. No, it’s meant to shoot and record video for any specific filmmaking or video production purposes. At least, not yet...
That being said, unlike traditional rangefinders which, you know, find the range for golfers on the course, the Canon PowerShot GOLF rangefinder can technically capture images and record video. Let’s take a look at this new PowerShot GOLF and explore how—and why—Canon has decided to develop a rangefinder for the first time ever.
Designed to deliver accurate, near-instant, and angle-compensated distance readings on the golf course, Canon’s PowerShot GOLF Digital Laser Rangefinder is fully equipped with quality optical features, yet still small enough to fit in the palm of your hand.
The PowerShot GOLF is capable of 6x optical zoom and 12x digital magnification and features high-precision laser and pin-locking functions, as well as image stabilization and a bright electronic viewfinder which should make it a perfect tool for getting a precise view of the pin.
Compact, lightweight, and waterproof, the PowerShot GOLF should easily fit into your pocket (or golf bag) and has its own built-in rechargeable battery which can be re-upped with a USB-C port. The PowerShot GOLF also notably features an optional Slope Mode feature for providing elevation-adjusted distances.
So, what’s cool about this Canon PowerShot GOLF rangefinder, which is basically a Canon PowerShot digital camera repurposed for golfers’ needs, is that it is still a camera—so it can take photos and record MP4 video with sound.
Of course, this rangefinder isn’t meant to shoot short films or commercial video, especially since it’s only powered by a 2.4MP CMOS sensor (13.5MP effective resolution) and only capable of recording clips up to 59 seconds in length, it is capable of recording images and videos for golfers to create their own course diaries.
You (again, read: me) will also be able to record audio with your video so you can make notes to yourself during your round, and all images and videos will also include superimposed distance info in your recordings which you can store directly to a microSD card.
This PowerShot GOLF isn’t for everyone. Most filmmakers and various content creator types will want to look for, you know, actual digital cameras for their videos. However, if you’re a golfer, or an avant-garde filmmaker looking to experiment with an abrasive style, the PowerShot GOLF could be one of Canon’s more notable innovations outside of traditional photo and video technologies.
Here are the full specs and purchase options:
The Canon PowerShot Golf Laser Rangefinder delivers accurate, near-instant, and angle-compensated distance readings on the golf course—and it also shoots photos and video, on the links or anywhere else.
Premiering at Tribeca Film Festival this year, “Sacramento” tells the story of Rickey (Michael Angarano), an energetic and free-spirited young man who convinces his long-time friend Glenn (Michael Cera) to go on a road trip across California, despite Glenn’s plans to start a family with his wife Rosie (Kristen Stewart).
Along the journey, the two friends confront past mistakes and contemplate their futures.
We spoke with editor Max Goldblatt about his approach to editing the heartfelt comedy using Adobe Creative Cloud tools. This was his first experience with the Productions feature in Adobe Premiere Pro, which enabled him and his team to stay organized and synchronized by easily sharing project files. He has since continued to use Productions for larger projects that require seamless collaboration among a large team!
Additionally, Frame.io was an essential part of the process — using it to share dailies with producers, VFX, sound and color teams, as well as sharing feedback and backing up assets to the cloud.
“Sacramento” premiered at Tribeca Film Festival on June 8. Read on for a more in-depth behind the scenes look into Goldblatt and his team’s remote workflow.
How and where did you first learn to edit?
My film education was heavily informed by the fact that my father Mark Goldblatt edited studio films while I was growing up. From as early as I can remember, I would visit the cutting room and watch him work. It was a privilege and thrill to be a fly on the wall for everything from watching down dailies, to making selects, to assembling and reworking scenes, all the way to the sound mix and test screenings.
This started when cutting on 35mm film was still the industry standard, so I guess technically I first learned to edit in 1992 when my dad’s assistant editors on “Super Mario Bros” showed me how to physically cut and join pieces of film using a splicer. They would give me little rolls of stray footage, leaving me to make my own little abstract films and trusting that I wouldn’t chop off any fingers.
How do you begin a project/set up your workspace?
In advance of the “Sacramento” shoot I read the script as many times as I was able to, breaking down substantial scenes into beats as a preliminary way of thinking about where shifts in emotion occur. I also love to prepare by watching other movies that a director might be influenced by for the project. Having a shared set of references was important for us on Michael’s first film “Avenues” and for “Sacramento” we zeroed in on road movies and 70s cinema.
I started cutting on Day 2 of the shoot and worked in the order the scenes were shot. I’d begin by watching a stringout of each scene and leaving notes for myself as markers on clips: things I like, things I don’t like, technical issues, usable reaction shots, good improvisation. I asked my first assistant editor Greg Armstrong to leave notes of his own in the timeline while prepping scenes, which helped me navigate the material more efficiently.
I usually spend the bulk of my time pulling and organizing selects for each scene based on my notes, often thinking about those script beats again in regard to potential edit points. Having done the work up front to engage with and react to the material, my first pass of a scene tends to emerge organically out of the selects. I wouldn’t say that the scenes edit themselves at that point, but sometimes it’s a bit of a blur and you suddenly have a scene in front of you that’s working well enough for you to move on to the next.
Tell us about a favorite scene or moment from this project and why it stands out to you.
There’s a ten minute stretch at the midpoint of the film that I really love. It’s just Glenn and Rickey in a few locations in Sacramento, and it sends us into the third act of the film. In the middle of this sequence there’s a conversation that occurs while they’re sitting on a bench which really encapsulates the movie for me (it’s also incredibly funny). We had minimal coverage and very few takes for this scene, but the performances from Cera and Angarano were so strong that it didn’t matter at all.
What were some specific post-production challenges you faced that were unique to your project? How did you go about solving them?
A lot of our focus while editing was towards calibrating the characters’ emotions over the course of the narrative. That’s certainly not unique to this film, but we devoted a lot of energy to dialing it in. I think of editing performance as a true collaboration — it’s the editor’s job to sculpt the varied decisions an actor makes over many takes of raw footage, and create something that feels emotionally consistent and true. Cera, Erskine, Stewart, and Angarano gave us such dynamic raw material that it was a joy to dive in and help mold their performances into what you see in the finished product.
What Adobe tools did you use on this project and why did you originally choose them? Were there any other third party tools that helped enhance your workflow?
I was excited to use Productions in Premiere Pro for the first time on “Sacramento” and have continued to use it on larger jobs that require access between multiple editors/assistant editors. I love how Productions enables a team to stay in sync, and it really beats the days of sending project files back and forth, wasting time re-linking media, and the project bloat that inevitably arises on something of this size.
We also used Adobe After Effects to smooth out a number of invisible split-comps that I had roughed together in Premiere Pro, and our titles were designed in Adobe Illustrator (using an Adobe font) by my incredibly talented wife Vanessa Riegel.
In terms of other tools, we had a great remote workflow. All our media was stored on a Synology NAS at Special Order who graciously provided post services. Working from my home office, Greg and I used Jump Desktop in order to remotely drive two powerful Mac Studios that were at Special Order, connected to the NAS. I needed the Production to be accessible to me as well as the in-house Assistant Editors at Special Order (Casey Jones and Emi Eck) for After Effects work, turnovers and finishing — so being able to rely on their pre-existing, secure infrastructure was key.
Do you use Frame.io as part of your workflow? If so, how do you use it?
We used Frame.io most frequently during production. Our DIT would share dailies via Frame.io. Because Michael was on location, I sent him my first passes of scenes as review links, and he would leave his initial reactions as comments. Once the film wrapped, and we were in the same room, we used Frame.io less for feedback. Instead, it was our means of sending cuts out for producers to review, for backing up assets to the cloud, and sending deliverables to VFX, sound and color.
If you could share one tip about Premiere Pro, what would it be?
Customize! Premiere Pro is adaptable, and you should absolutely mold it to how you like to work. My keyboard shortcut preset has evolved over time from the Final Cut 7.0 layout to include all sorts of tricks and shortcuts I’ve learned that have made my life easier over the years. And that’s the other thing, never stop learning about Premiere Pro. Keeping up with new versions and exploring the latest features will only make you work more efficiently, and that should mean that there’s less standing between you and your creative impulses.
Who is your creative inspiration and why?
Film is a collaborative medium, so I’m always inspired by ongoing partnerships. It’s heartening to see people at the top of their game work together regularly, especially over long periods of time. There’s generally a great deal of trust in these relationships, the kind of trust I seek out and aspire to in my own working relationships. Of course I’m massively inspired by the collaboration between Thelma Schoonmaker and Martin Scorsese. Others that immediately come to mind are Robby Müller and Wim Wenders, Julianne Moore and Todd Haynes, Denis Lavant and Leos Carax, Mica Levi and Jonathan Glazer… the list goes on.
What’s the toughest thing you’ve had to face in your career and how did you overcome it? What advice do you have for aspiring filmmakers or content creators?
Making a living doing what you love doesn’t always come easily. An unfortunate reality of this industry is that below-the-line workers are constantly taken advantage of. You may find yourself in situations where you’re undervalued or under compensated — I certainly have. It’s incredibly important to stick up for yourself. Know your worth. I used to say yes to every gig (even freebies) out of fear, but I found great freedom once I started to turn down work that didn’t feel worth it. You have to use your intuition to sniff out the opportunities that might really help advance your career, even if the pay isn’t great. Navigating this is not an exact science, and you’ll invariably make some mis-steps, but the important thing is to trust your gut.
Share a photo of where you work. What’s your favorite thing about your workspace and why?
Eyepiece My favorite thing about my workspace is that it’s at home, so I can just open the door and immediately be with my family. I also love listening to music while I work, so it’s great to have my record collection in the same room.