Here's an interesting alternative to an established manufacturing solution.
CNC mills use spinning bits to remove material. This material comes off in the form of tiny chips. These chips must be evacuated, to avoid clogging the worksurface and potentially jamming or overheating the bit. Cnc Vertical Mill
The common solution is to use a dust shoe, which encases the cutting area within a bristled perimeter while a vacuum theoretically evacuates the chips.
However, these simply aren't very effective, as the vacuum hose must be located a safe distance away from the spinning bit. Additionally, they obscure one's view of the cutting action, which may be required in order to make adjustments (or present video of the action, for content creators).
Some users get around the chip clearance problem by mounting air compressor attachments close to the bit, to continuously blow the cut out. But this presents additional hassles, from having to run the compressor and mount the fittings to the spindle/router.
A clever, low-tech solution has emerged. People have been 3D-printing their own collet fans:
These are essentially impellers, designed to snap onto the collet nut with a friction fit.
As the bit spins, the fan creates enough downdraft to blow the chips out of the cut.
There are, however, two things to be mindful of. One, the fan's design must be robust enough that the thing doesn't come apart at high rpms.
The second potential hazard relates to a risk CNC mill operators are already aware of: Accidentally running the spindle into a jig or clamping fixture used to hold the workpiece. The collet fan's wider diameter creates a larger "danger zone" around the bit. CNC enthusiast Bryan Howard demonstrates a collet fan collision in slow-mo, with the spindle running at 24,000 rpm:
Obviously, using a collet fan behind a protective enclosure is recommended.
CMT and a few other companies make these (still for use with extraction, but to help send it the right way). Was just ordering one this week. Pricey, but it means we can do 18mm melamine in a single pass and leave the bed clean afterwards. Maybe a bit different in that they replace the collet nut but same principle. I think the 3d printed version is a nice idea for its target market https://www.voswebshop.nl/webshop/992.101.ER32.html
Test it out; it only takes a single click to unsubscribe
Formation is a product design + development company focused on human centered design innovation. To ...
Fresco supports world-class brands with world-class design. Based in the Boston area, a leading inno...
Mighty Studios is a business-savvy product design consultancy. We believe that good design should be...
Spanner, a creative engineering and product development design studio, enables the world’s leading b...
We're a full-service branding and creative agency. We specialize in building brands, companies and o...
PDR is a major award-winning, multidisciplinary international centre for design and research with a ...
Founded by an award-winning team with over 20 years of combined product design experience, Hatch Duo...
Don't have an account? Join Now
Already have an account? Sign In
By creating a Core77 account you confirm that you accept the Terms of Use
Please enter your email and we will send an email to reset your password.
Mill Axis Test it out; it only takes a single click to unsubscribe