Editor’s note: This is Part One of three temperature articles to accompany the July Tech Update on Temperature Monitoring and Control. Part Two looks at linking process control with building, refrigeration and environmental control systems while Part Three considers IIoT and wireless temperature monitoring and control.
Another article entitled “No spiral freezer should be an island of automation” and written for this series by Ivy Arkfeld, energy engineer for VaCom Technologies, showed how integrating a spiral freezer with process and refrigeration controls increases efficiency, speeds production and saves energy. fluke multimeter
M oving from an all-analog means of keeping track of process and storage temperatures can provide numerous benefits—for example, getting more robust measurements with higher stability, reliability and accuracy. In addition, you get better diagnostic information from the sensors themselves, and this information—coupled with temperature and other process variables—can help you get a better grip on your process and on maintenance, too.
Suppliers and system integrators (SIs) stand ready to help. Suppliers, which have firsthand experience with unique applications, can provide solutions to what may seem an insurmountable challenge, for example, how to employ sensors when process penetration is not allowed due to required compliance with hygienic standards, says Kevin Stultz, global product manager, Rosemount Temperature, Emerson Automation Solutions. Suppliers can also assist with the setup of wireless networks to allow for better process coverage, usually with lower installation cost compared to many wired solutions.
First, assess the maturity level for the digital adoption, says David Parker, chief evangelist for Cloudleaf, a supply chain system provider. First thing any system integrator (SI) will do is understand a manufacturer’s process today and how much can be accomplished by putting a new technology in place to overcome existing issues, for example like manual scanning.
It must make financial sense to invest the capital to move to a digitally controlled, automated temperature control system, says Steve Malyszko, co-founder, Malisko Engineering, a Control System Integrators Association (CSIA) certified member. Once the processor makes that commitment, then it’s time to consider also making the incremental capital investment to leverage the value of installing a data historian to capture the actual temperature measurements of the critical temperature control points in their process in real time.
What are some of the ways moving to digital from analog makes good financial sense? “Digitally managing temperature can help you achieve business goals like reducing cycle time, preventing product damage, and improving data collection of storage for regulatory reporting,” says Dan Reinarts, industry technical consultant, Rockwell Automation.
For smaller processors, there are solutions that are digital, wireless and simple to use. Adam Fleder, president of TEGAM, suggests a wireless thermometer, which has an included phone app and cloud storage, enabling immediate data storage with no additional purchases. Medium-size and large processors can use their existing QMS and TEGAM’s software development kit to customize applications.
In making the analog-to-digital move, one of the more important steps for a manufacturer to take is analyzing the processes it has in place when the staff takes temperature measurements, says Nick Mecham, VP, business development, Monnit Corporation. “Are there actions needed at certain thresholds? What’s the required frequency of assessments?”
“Understanding the critical data points ahead of time allows for proper planning,” says Robert Villarreal, Endress+Hauser product marketing manager – temperature and system products. “Data should always be actionable information, otherwise, it risks becoming overwhelming or useless information.” System planners also need to understand who else and what other processes may utilize this information and why it’s important.
“Before you start evaluating digital solutions, you should manually collect data and current procedures to estimate the potential financial benefit,” adds Reinarts. As part of this process, stakeholders should capture requirements for the project and any ideas for improving workflows.
These requirements need to be accurately integrated into the digital monitoring system a processor has selected. Once that’s done, the processor’s staff will be able to determine if it’s best either to migrate completely to a new digital platform or integrate wireless sensors into the existing platform, says Mecham.
There’s an integration process when moving from manually inputting temperature data to digital collection, adds Mecham. “This is where a system integrator becomes vital. SI’s help bridge the gap between the new digital monitoring platform and the customer’s existing data platform if they wish to stay with that.”
A system integrator is invaluable in a situation like this, says Joshua Eastburn, director of technical marketing, Opto 22, a CSIA partner member. A good SI or automation vendor partner will be able to walk the user through assessing the current state of processes, the applicable technologies, the front-end engineering design and the financial planning required to bring the system into being.
Selecting an experienced automation partner may require interviewing current and new service providers, says Reinarts. “When discussing your requirements with a potential partner, it’s important to know their industry experience and regulatory knowledge.” For example, a supplier or system integrator must be able to articulate the advantages of the different software, hardware, communications media and protocols offered for temperature control. A 4-20ma signal may be all that’s needed but understanding the benefit of HART will allow an informed decision. If there are regulatory requirements on digitally stored data, it’s also essential they be able to describe how each of those requirements are met.
What should you look for in a SI? Ryan Beesley, CAP, regional engineering manager for Concept Systems, a CSIA certified member, suggests seeking out a SI with strong process controls expertise. A SI that has the skills and experience necessary typically will have a few characteristics:
Sometimes processors and SIs may have to work with what’s already in place in doing a conversion. “In replacing mechanical temperature instruments, if there are thermowells in place, which may be difficult or impossible to remove (some are welded in), it is important to replace the mechanical instruments with measuring probes and connections that will fit that same thermowell, says Alan Clark, Palmer Wahl Instruments, Inc. applications engineer. Electronic sensors offer the option to allow remote mounting of the temperature indicating display, using either wired or wireless transmission of data. Issues to be considered are:
A typical accuracy increase will be on the order of three to ten times better, depending on what they were using previously versus the new system, says Clark. RTD temperature sensors are typically five to eight times more accurate than a thermocouple based system and will also be much more stable against drift, long term.
While we’ve highlighted some of the reasons and steps to take in making the move from analog to digital to monitor your process, digital offers some key benefits in providing a way to integrate your process control system with building control and HVAC systems and monitoring the temperature of your goods while in transit. We’ll look at these plus IIoT and single-point solutions in coming stories.
Concept Systems Inc., www.conceptsystemsinc.com
Emerson Automation Solutions, www.emerson.com
Endress+Hauser, www.us.endress.com
Malisko Engineering, www.malisko.com
Palmer Wahl Instruments, Inc., www.palmerwahl.com
Rockwell Automation, www.rockwellautomation.com
You must have JavaScript enabled to enjoy a limited number of articles over the next 30 days.
The Food Safety Summit is a solution-based conference and expo designed to meet the educational and informational needs of the entire food industry. The Summit provides a 3-day comprehensive educational program to learn from subject matter experts, trainers, exchange ideas and find solutions to your current job challenges. The Summit has an expansive Exhibit Hall packed with progressive solution providers and exclusive networking events to help you make meaningful industry connections.
For webinar sponsorship information, visit www.bnpevents.com/webinars or email webinars@bnpmedia.com.
Combining scientific depth with practical usefulness, this book serves as a tool for graduate students as well as practicing food engineers, technologists and researchers looking for the latest information on transformation and preservation processes as well as process control and plant hygiene topics.
Copyright ©2024. All Rights Reserved BNP Media.
p f proximity sensor Design, CMS, Hosting & Web Development :: ePublishing