While the consumption of PVC has been growing at a scorching rate in India for decades, its potential continues to be high
This is one crucial component omnipresent and conspicuous everywhere, be it households or extensive infrastructure. However, unlike most discoveries and inventions, it was not the culmination of research and experiments, but a result of a combination of natural elements. Yes, that is how PVC, which India imports in shiploads and offer lucrative margins to importers, came into being Custom Plastic Extrusion
Satyapal Menon | The Dollar Business
The serendipitous discovery of Polyvinyl Chloride (PVC) is attributed to Eugen Baumann, a German Scientist, who found a white solid particle inside a flask of vinyl chloride that was left exposed to sunlight. This was in the year 1872. Later, after many attempts to make this brittle polymer more flexible and viable for commercial applications, the required properties were finally achieved with amalgamation of plasticising additives. Since then, by all stretches of imagination, PVC has evolved from its rather brittle beginnings to become the most flexible substitute for concrete, wood, rubber and steel products in complex & multiple applicability.
Today, the enormity of its necessity is reflected by the fact that global consumption of PVC resins – HS Code 39042110 – has been consistently witnessing a dynamic momentum in growth rates, with Asia-Pacific region accounting for more than half of the global pie during CY2013 – a little over 20 MMT out of a total world-wide consumption of nearly 40 MMT. The utility of PVC end-products are spread across various segments comprising electrical, electronics, agriculture, automobiles, packaging, pharmaceuticals, and agriculture. And there are basically two types of PVC raw materials that are used for various end products – suspension and paste resin.
India is among the biggest consumers of PVC end-products, with incessantly burgeoning consumption in infrastructure and agriculture sectors. According to estimates, India accounts for 6% of the total global PVC resins consumption. In fact, highlighting just how important plastic, and consequently PVC, has become in modern India, Surjit Kumar Chaudhary, Secretary (C&PC), Ministry of Chemicals & Fertilisers, speaking at a recent conference, said, “The future belongs to the plastics and polymer industry as it will play a vital role in realising the economic aspirations of a developing India.” Inexplicably, despite enormous potential, India’s production and supply of PVC resins is only slightly over half of its demand, i.e., 1.25 MMT, as compared to a total demand of around 2.25 MMT. According to industry sources, while the demand for PVC resins have been recording nearly double-digit CAGR during the last five years, production has been growing at less than half of this at 4%. With demand galloping and indigenous production on a stroll, the over dependence on imports seem to be an inevitable consequence.
Pointing out that net exports of plastics have not increased over the years, while net imports have risen manifold, Chaudhary stated the government was committed to decrease this gap through the ‘Make in India’ campaign. “There is a need to boost the plastics industry in the country and further advance the per capita consumption of plastic,” he said. It’s worth noting that despite huge aggregate demand, India’s per capita plastic consumption is very low at around 9.7 kg as compared to China and US, where the corresponding numbers are 90 kg and 120 kg respectively.
An analysis of India’s PVC resins imports over the last 10 years reflect a stunning 43.6% CAGR from just over $25.06 million in FY2004 to over $935.23 million in FY2014. In fact, The Dollar Business Intelligence Unit estimates that in the current financial year, this number is all set to cross the $1 billion mark and can actually reach close to $1.25 billion. When it comes to sources of imports, while Taiwan had a lion’s share in India’s imports of PVC resins during the FY2014, with imports valued at $314.68 million, followed by South Korea, which accounted for over 22% of India’s imports, valued at $207.05 million and China, which accounted for over 18%, valued at $169.33 million. China’s share in the pie has risen considerably in the current financial year and it is all set to become the biggest source of Indian PVC resins imports.
It’s worth noting that among the major PVC exporters to India from Taiwan are CGPC Polymer Corporation, Formosa Plastics Corporationand Ocean Plastics Co Ltd. Similarly, China based exporting companies comprise Qingdao Haijing Chemical Group Co Ltd., Yibin Tianyuan Group Co Limited, Xinjiang Shihezi Zhongfa Chemical Co. Ltd., Shandong Ocean Chemical Chlor-Alkali Resin Co. Ltd., and Xinjiang Zhongtai Chemical Co. Ltd. On the other hand, South Korean exporters include LG Chem and Hanwha Corporation.
In what could be clearly viewed as another blatant and illogical imposition of anti-dumping duty (ADD) on the diktats of a few domestic biggies involved in PVC resins production, the Directorate General of Anti-Dumping and Allied Duties (DGAD) has contrived a rigmarole of calculations to arrive at injury margins vis-à-vis price of domestically manufactured PVC. Indian companies DCW Limited (DCW), Chemplast Sanmar Limited (Chemplast), Reliance Industries Limited (RIL) and DCM Shriram Consolidated Limited had, in 2006, filed complaints to the DGAD stating that low priced imports of PVC was impacting their own revenues, performance, survival and existence. The DGAD ‘fixed’ the injury margins to the domestic sector in a range of 10% to 30% (even 85% to 95 % in some cases) and imposed ADD against importers of suspension grade PVC from China, Taiwan, Indonesia, Thailand, Malaysia, Japan and US. While imports from Taiwan have been levied ADD ranging between $33.62/MT and $61.25/MT, imports from China is subjected to ADD ranging between $91.27 to $147.96/ MT.
While the government continues to cater to minority producers to ensure their protection (it just cannot afford to ignore the commands and the demands of the powerful lobbies, can it?), importers, who comprise a majority, and the entire country as a whole have been left to burden the implications of myopic decisions. Can there be a more glaring example to substantiate this fact than the wide chasm between domestic supply and demand in the country. Moreover, importers of PVC in India contend that some of these companies do not produce the extensive range and grades of PVC that is required by the end-users. Aren’t such measures causing injury, not only to a few players in the industry, but to the economy of the country as a whole, especially when India is encountering gross insufficiencies and inadequacies in domestic production? Don’t such decisions symbolise misplaced priorities when India is looking for affordable solutions to give a boost to crucial sectors like agriculture and infrastructure? The question to be answered by policymakers here is whether opening the doors for untrammeled access to low cost imports and allowing competitive pricing would act as a deterrent or a positive to India’s overall development. It’s worth noting that the companies, which were the applicants for the imposition of ADD, account for about 74% of the total domestic supply, with Reliance Industries being the biggest producer with 650,000 TPA (Tonnes Per Annum) capacity and Chemplast Sanmar being another major producer with 250,000 TPA capacity.
According to a FICCI (Federation of Indian Chambers of Commerce and Industry) report on the plastic industry, “Greater use of plastic in agriculture can help to a great extent achieve up to 50% of the intended targets in agriculture. The wider use of plasticulture – a term referred to the use of plastic in agriculture – can reduce the loss of harvest and increase efficiency, thus contributing more to India’s gross domestic product (GDP). It is estimated that agriculture output can be increased by Rs.68,000 crore/annum by using proper plasticulture applications like drip irrigation.”
The report points out that innovative plastic packaging and handling techniques can promote proper harvest management, which will, in turn, contribute towards the agriculture-GDP. The penetration of plastics in agriculture globally is 8% whereas in India, it is substantially lower at only 2%. This indicates the farm segment could be one of the major segments which drive the growth of the plastics industry. But while the demand for pipes and fittings in India has been rising in double digits over the years, market prices are getting distorted by some ludicrous factors, thereby impacting the cost of production.
The Planning Commission had estimated total infrastructure spending to be about 10% of GDP during the 12th Five-Year Plan, with construction equipment sales galloping at break neck speed.Similarly, IBEF claims that passenger vehicles segment was the fastest growing segment in the last eight years, growing at a CAGR of 12.9%. IBEF also claims the electronics segment in India is growing at a CAGR of 9.2%, with production of electronics hardware goods estimated to reach $104 billion by 2020. It does not require our so-called experts or economists to envision the considerable savings the economy can have if ADD on one of the primary raw materials in these sectors – PVC – could be removed.
A rough estimate of such savings can be made from a The Dollar Business Intelligence Unit study, which, while on one hand, found FOB prices of various grades of Chinese PVC resins to be in the range of $800-1,000/MT (roughly Rs.48,000-60,000/MT, assuming USDINR at 60), on the other hand found the ex-depot prices of various PVC grades (prime grades and off grades) offered by Reliance Industries in the range of Rs.68,000- 71,000/MT.
If the question is whether domestic producers of PVC resins have the capacity to catch up with the ever growing demand, the answer is quite obvious. No, they don’t. Moreover, imports are the need of the hour, since they also make our end-products more competitive because of being cheaper. Hence, policymakers should demonstrate a propensity to be more flexible with imports, instead of flexing their muscles and clamping down on low-cost imports. This will also push your, if you are importing or planning to import it, margins higher.
“Anti-dumping duty is not justifiable because shortages are huge” - Meela Jayadev, Managing Director, Sudhakar Polymers Ltd.
TDB: In what way is the insufficiency in domestic output impacting the manufacturers of PVC finished products, both in terms of cost of production and pricing?
Meela Jayadev (MJ): The insufficiency in domestic production has had a major impact on the manufacturers of PVC finished products. It has not only led to shortage of materials but also increase in raw material prices, thus resulting in an unhealthy environment for the processors and high cost of production. The increased cost has impacted small and medium players more, with them encountering non-competitive pricing, resulting in the market slowly gravitating towards large players.
TDB: Can you give us an idea about the present status of domestic consumption and domestic production of PVC raw materials?
MJ: Present consumption of PVC resin is about 2.4 MMT, while local production is about 1.3 MMT.
TDB: What are your expectations/projections for both PVC raw materials and PVC finished products?
MJ: PVC has very good scope in India and the consumption is rising substantially with the Union Government’s thrust on Swach Bharath and Energy & Environment Conservation policies. The estimated growth now is about 12% to 15%, which will get boosted to more than 20% in case the government implements strict mandates on the usage of wood in the construction industry and fossil fuel conservation in certain categories of products related to infrastructure and municipal sewerage. In these segments, the consumption of PVC might double or even treble with the right government initiatives and mandates.
TDB: Despite huge domestic demand, what do you think is the reason for demand-supply gap in India?
MJ: Environmental clearance issues and shortage of intermittent feedstock are the major reasons for non-expansion of PVC capacities across the world. The uptrend in consumption of PVC among developing countries is also contributing to escalation of demand at the global level, which in turn has adversely affected India. Apart from this, the anti-dumping duty imposed on PVC resin imports from China, Europe and United States has also created a big gap between demand and supply.
TDB: What has been the impact of anti-dumping duties on PVC resin imports? Do you think anti-dumping measures are justified?
MJ: From the perspective of demand and supply, imposing anti-dumping duty is not justifiable as there is huge shortage in the domestic market.
TDB: Do you think there is a difference in quality between PVC resins produced in India and that produced in countries that we import from?
MJ: There is not much difference in quality. However, certain production parameters need to be adjusted while processing the materials of different origins.
TDB: While importing the product, is it pricing or the quality of raw material or both that influences your decision to procure from a specific country? Which is the your most preferred country for import of PVC raw material?
MJ: The countries with low-sailing time are the preferred destinations for any PVC consumer. Europe and American suppliers will take 30 to 45 days to deliver the materials at plants in India, whereas South East Asian and Asian suppliers will take a maximum of 30 days. Otherwise, there is no such preference for the country of origin until and unless there are material quality and pricing issues.Both pricing and quality play a vital role in decision making. Low-priced materials with sub-standard quality are not preferred irrespective of the country from where the product is sourced.
TDB: Which sectors account for the maximum utilisation of PVC resins?
MJ: Agriculture, water supply, infrastructure and construction are the major consumers of PVC.
TDB: From your point of view, what policies or measures do you want the government to implement in order to give a boost to the PVC finished products segment?
MJ: Strict implementation of green products in the infrastructure industry will increase the consumption of PVC finished products. There are untapped markets for replacement of wooden windows, stoneware pipes, wood particle boards etc. with PVC windows, PVC pipes and PVC foam board.
TDB: What needs to be done to increase the domestic production of PVC resins so as to meet the demand of the PVC finished products segment?
MJ: Domestic producers should increase production capacities and at the same time need to adhere to environmental issues. Anti-dumping duty also needs to be revoked to enable suppliers meet the demand of the Indian market.
Get the latest resources, news and more...
By clicking "sign up" you agree to receive emails from The Dollar Business and accept our web terms of use and privacy and cookie policy.
Copyright @2024 The Dollar Business. All rights reserved.
Plastic Extrusion Data Strip Your Cookie Controls: This site uses cookies to improve user experience, and may offer tailored advertising and enable social media sharing. Wherever needed by applicable law, we will obtain your consent before we place any cookies on your device that are not strictly necessary for the functioning of our website. By clicking "Accept All Cookies", you agree to our use of cookies and acknowledge that you have read this website's updated Terms & Conditions, Disclaimer, Privacy and other policies, and agree to all of them.