Largest clamp stroke in mid-tonnage hybrid machines a standard feature.
Milacron’s M-Series injection molding machine (IMM) platform will make its North American debut at NPE2024, featuring in two applications at the Ohio-based company’s booth from May 6 to 10 in Orlando, FL. wire edm machine
The M-Series features as standard the largest clamp stroke in the mid-tonnage hybrid range, the company said. Fanuc motors and drives power the platform, which is based on two-platen technology and can be integrated with multiple co-injection technologies to support customer sustainability requirements.
This video provides a brief introduction to the M-Series features.
Two applications showcasing the M-Series are planned at the company’s booth:
A two-cavity mold-pail application with up to 50% recycled core and in-mold labeling automation performed by the M-1070 using Mold-Masters co-injection technology.
Custom textures and backlighting for automotive and appliance applications using an M-500 machine cell featuring a Mold-Masters hot runner and Kurz in-mold decoration technology.
Available from 500 to 1,250 tons, the M-Series also features:
Moving platens on LM guides on the clamp end, with standard power-operated gates and chrome-plated strain rods.
Increased maximum mold weights, improved dry-cycle times, and supported strain rods in the mold section.
Twin-cylinder injection units for equal distribution across the screw.
Injection swivel for easy screw removal.
Linear position transducers for accurate injection position control.
A 21.5-inch touch screen control panel with swing arm to improve viewing of the mold area. The panel’s “plus” section enables configurable screen viewing; 8+8 configurable I/Os is standard.
Besides its M-Series, Milacron will also be spotlighting the following:
Q-Series platform, a low- to mid-tonnage range featuring double-toggle design and servo-hydraulic operation for fast production using less energy. A Q-170 machine with G3 Mosaic control and DME mold technology using bio-resin will be featured in a mobile phone holder application.
All-electric Fanuc Roboshot in two applications. The Robo 55, using liquid silicone rubber material and automation, will be in a cell featuring a micro plunger to control a tiny shot for an umbrella part. The Robo 275 will demonstrate a 48-cavity medical vial application using Milacron’s stainless steel water system and new M3 thermocouple technology from Mold-Masters.
SG75 extrusion system with a new control, new die heads, and advanced single/twin screws and barrels. The package includes all downstream equipment — vacuum tank, pullers, saws, and more. A cobot at the end of the line will perform demonstrations.
M-Powered IIoT remote digital solution that uses built-in analytics of real-time machine data to identify causes of downtime, production inefficiencies, and quality issues.
L-Series low-pressure injection molding machinery, capable of running up to 100% regrind flake material. The machine will not be on site but featured in an animation loop.
Visit Milacron at booth W1601 during NPE2024 at the Orange County Convention Center.
Geoff Giordano is a tech journalist with more than 30 years’ experience in all facets of publishing. He has reported extensively on the gamut of plastics manufacturing technologies and issues, including 3D printing materials and methods; injection, blow, micro and rotomolding; additives, colorants and nanomodifiers; blown and cast films; packaging; thermoforming; tooling; ancillary equipment; and the circular economy. Contact him at [email protected] .
New Dimensions in Medical Tubing and Cables
Breaking News in Flexible Packaging April 2024
Sky’s the Limit for KraussMaffei’s FiberForm Technology
Global Plastics Treaty Talks: Yawning Gap Between Lofty Goals and Practical Effects
case hardening Copyright © 2024 All rights reserved. Informa Markets, a trading division of Informa PLC.