Sandvik Coromant’s CoroMill MH20 is primarily designed for milling cavities, or pockets, in ISO S, M and P materials. Ensuring secure and vibration-free machining, especially at long overhangs, the CoroMill MH20 is said to deliver best-in-class edge security for a variety of industries and is particularly suited to machining aerospace components.
The CoroMill MH20 complements existing products in the CoroMill range and fills a strategic gap in the high-feed indexable milling product line. Designed to deliver reliability with minimal vibration, the CoroMill MH20 has been adapted for applications where components are notoriously difficult to machine, such as in the oil and gas, mould and die and aerospace sectors. Corodrill 880
The tool’s ability to machine at long overhangs makes it especially beneficial for the aerospace sector, according to the company. This method is an important requirement when machining deep, narrow pockets to produce the components that form an aircraft’s frame, such as the supporting beams found within the sub-segment aerospace frame. These beams are often machined from forged titanium. When paired with the requirement for long overhangs, this creates a difficult machining environment with a high risk of vibration.
In contrast to the conventional four-edge concept, the CoroMill MH20 is designed with a two-edge insert, which means the weakest section of the insert is far away from the main cutting zone, delivering greater reliability and protection against wear. It also means that machining against a corner or wall will not impact the next edge or leading corner, ensuring equal performance per edge.
Another area of innovation is the CoroMill MH20’s insert cutting edge geometry. While the sloped edge design delivers a gradual, light-cutting action that requires less power consumption to enable the use of smaller machines, the optimised edge line of the main cutting edge and insert corner radius offer further process security, enabling reliable, unmanned machining.
Further, when compared to another Sandvik Coromant high-feed milling tool, the CoroMill 415, the new tool demonstrated a 32% increase in tool life with a significantly better component quality when machining a titanium aerospace wing support component. In addition, further testing against competing tools reportedly demonstrated superior reliability and more secure machining performance when machining steel and stainless steel workpieces.
Capto C8 Tool Holder For further details contact Sandvik Coromant on TEL: 010 500 2295 or visit www.sandvik.coromant.com