Thank you for visiting nature.com. You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.
Scientific Reports volume 13, Article number: 18555 (2023 ) Cite this article Silicone Gas Migration
Carbon steel is widely used in the petroleum industry for pipelines, storage tanks, and equipment due to its mechanical properties, and strength. However, challenges such as environmental conditions and corrosive materials can affect its lifespan and require maintenance and repair. This work aimed to prepare pyrazalone-sulfonamide hybrids, and confirmed by mass spectra, FTIR, 1H-NMR, and 13C-NMR. These compounds were examined as mild steel corrosion inhibitors in 1 M HCl solutions at 298–323 K using the gravimetric technique, electrochemical measurements, scanning electronic microscope analysis, and quantum chemical calculations. The values of inhibitory efficiency identified by electrochemical and non-electrochemical techniques exhibit good agreement. At various temperatures and in the 50 to 500 ppm concentration range. During the adsorption process, these substances connect to the Langmuir adsorption isotherm. Some adsorption isotherm and kinetic parameters have been developed and discussed. The metal surface had a thin inhibitory protective layer, according to investigations using energy dispersive X-ray spectroscopy (EDX) and scanning electron microscope (SEM). These findings demonstrated the potential of pyrazolone-sulfonamide as effective organic corrosion inhibitors for carbon steel.
Wensheng Fang, Wei Guo, … Bao Yu Xia
Matic Jovičević-Klug, Isnaldi R. Souza Filho, ... Dierk Raabe
Hanyu Huo, Ming Jiang, … Jürgen Janek
Corrosion is an indication of how reactive the majority of industrial materials are to the environment in which they are used1,2,3. Iron continues to be the most used material in engineering. Due to its inexpensive cost and flexible mechanical properties, iron is the backbone material. Steel is still the most often used material for usage in transmission pipes, flow lines, plates, sheets, tubing, and structural components in the oil and gas industry4,5. Hydrochloric acid is one of the most often used acidic substances for acid descaling, industrial cleaning, acid pickling, and cleaning metal surfaces to avoid corrosion damage6. Localized corrosion is frequently brought on by aggressive ions known as chlorides (Cl−). Their presence in solutions has two complementary effects: on the one hand, their local concentration makes the medium more acidic, and on the other hand, salinity alters the conductivity of the aqueous medium. In brackish or potable water, steel naturally corrodes7. The organic molecules inhibit corrosion by adhering to the metal’s surface. The two fundamental forms of interaction that may be employed to describe these adsorption processes are physical adsorption and chemisorption8. The nature and charge of the metal, the chemical composition of the organic product, and the kind of electrolyte all have an impact on these two forms of adsorption9,10. The use of organic compounds as corrosion inhibitors is still a study topic that is being explored, if our conclusions are based on the number of publications that are published each year. Moreover, it has been discovered that heterocyclic compounds containing heteroatoms like nitrogen, sulfur, and oxygen are the most efficient defenses against steel corrosion under acidic environments11,12,13,14. Moreover, studies into the anticorrosive properties of heterocyclic triazoles, thiadiazol, pyrazole, and other substances have thus far yielded good results. This area of research is essential because these compounds can replace potentially harmful inhibitors that are regarded to be unacceptable for the environment15,16,17,18,19,20,21,22,23.
The process of connecting or fusing two different chemical entities results in new hybrid moieties and is known as molecular hybridization. It is expected that the pharmacological activity of the hybrid compounds will be additive or synergistic. The two parts were selected based on their previously known bios. Since several of these hybrid derivatives were more effective and had a lower toxicity profile than their parent chemicals, they were widely used24,25.
The pyrazoline derivatives are an intriguing group of heterocyclic compounds because of the discovery of fresh lead compounds with a wide range of biological characteristics and the significant role they play in drug creation. They stand out for their adaptability in the synthetic process as well26. The phenyl-pyrazolone unit is found in a variety of compounds with potential as medicines. With especial, 1-phenyl-3-methyl-5-pyrazolone (PMP), also known as edaravone Fig. 1, is a bicyclic chemical structure present in a variety of medications, most notably edaravone but also antipyrine (phenazone) and propyphenazone as examples Fig. 1. Essentially, the 1-phenyl-3-methyl-5-pyrazolone molecule will resemble the PMP reagent a biochemists use to analyze carbohydrates. For those in the medical field, the drug edaravone, which is used to treat acute stroke harm and amyotrophic lateral sclerosis, will mostly have the same structure (ALS). The structure can be viewed as an intriguing framework that medicinal chemists can use to build new drugs, especially ones that are antioxidative and/or anticancer27. One of the most important types of antibacterial chemicals is sulfonamide derivatives28. Many compounds containing sulfonamide groups also exhibit additional essential biological traits, such as anticancer activities29, antidiabetic type 230, and antifungal activities31. Nowadays, pyrazoline and sulfonamide scaffold hybridization has been investigated26. Sayed et al. reported on the synthesis and anticancer evaluations of pyrazolone-sulfonamide hybrids as against HepG2, HCT-116, and MCF-7 cancer cell lines using the pharmacophore hybridization approach32. Yamali et al. reported the synthesis of new pyrazoline-sulfonamide hybrids and in vitro pharmacological assessment as multi-target agents for the inhibition of acetyl cholinesterase and carbonic anhydrase I and II enzymes33. The molecular structure, electrical structure, and reactivity of heterocyclic organic compounds have been determined using the density functional theory (DFT), which has also been used to light the process of corrosion inhibition34,35.
Phenyl-3-methyl-2-pyrazol-5-one, known as PMP or Edaravone and the related pharmaceutical products antipyrine (phenazone) and propyphenazone.
In this study, we developed pyrazalone-sulfonamide hybrids by combining these two molecular parts into a single framework, in which the sulfonamide fragment was attached to the pyrazalone through a variety of linkers as shown in Fig. 2, and we tested these hybrids as mild steel corrosion inhibitors in 1 M HCl. Electrochemical frequency modulation, electrochemical impedance spectroscopy (EIS), and potentiodynamic polarization were a few of the techniques employed to evaluate the inhibitory impact (PDP).
Scheme for synthesis of pyrazolone-sulfonamide hydrids 6a, 6b.
The substances were high purity, analytical reagent grade compounds. The British Drug House provided the organic solvents. A Gallenkemp melting point detector was used to find melting points (OC, uncorrected) in open capillaries (Sanyo Gallenkemp, Southborough, UK). IR spectra (KBr discs) were obtained using Fourier transform infrared spectroscopy (FTIR, plus 460 or Pye Unicam SP-1000 spectrophotometer, Pye Unicam, Cambridge, UK). 1HNMR spectra (DMSO-d6) were collected using a Bruker spectrophotometer (400 MHz for 1HNMR and 100 MHz for 13CNMR). Tetraethyl silane is used as an internal standard, while DMSO-d6 is used as the solvent. Chemical shifts are displayed in ppm. MS electrodes with the compositions and pre-treatment information described in our prior study were purchased from the AL-EZZ firm in Alexandria, Egypt. The 1 M HCl solution that is corrosive was created by diluting 37% hydrochloric acid36. The morphological investigation of the MS was conducted using the scanning electron microscope (SEM, JEOL, JSM5400LV).TLC on silica gel 60 F254 plates, visualization with UV light (254 nm), monitoring the reaction progress, and assessing the purity of synthesized compounds.
Ethyl acetoacetate 1 (0.01 mol) and phenyl hydrazine (0.01 mol) were dissolved in ethanol (20 ml) and refluxed for one hour before the solvent was evaporated. The equivalent pyrazole 2 was produced as light yellow crystals when the solid residue crystallized from ethanol (Lit.mp 126–128 °C)37.
In 50 mL of water, 0.1 mol of sulfathiazole 3a was suspended. Then under stirring conditions, 10 mL of 36.5% HCl was added to this solution. The mixture was progressively heated to 60 °C until transparent. An ice bath was used to cool the solution from 0 to 5 °C. The addition of a sodium nitrite solution (0.5 g in 5 mL water) was stirred for 5 min. 1-Phenyl-3-methyl-5-pyrazolone 2 (0.1 mol) was dissolved in 20 mL of (95%) ethanol and kept at 0 to 5 °C. With sodium acetate. the diazonium salt solution was added for 10–15 min while being continuously slowly stirring to get a pure product of 4-(2-(3-methyl-5-oxo-1-phenyl-1H-pyrazol-4(5H)-ylidene) hydrazinyl)-N-(thiazol-2-yl)benzenesulfonamide 6a, The precipitate that was formed was filtered, dried, and then recrystallized in 85% aqueous ethanol. solid colour of red.m.p. 145–146 °C, yield 92%. IR (KBr, cm–1): 3100(NH), 2911(CH-alph), 1689 (C=O), 1595 (N=N), 1362, 1143 (SO2); 1HNMR (400 MHz, DMSO-d6) δ: 2.25 (s, 3H, CH3), 6.74, 7.21 (2s, 2H, thiazole-H), 7.89 (d, 2H, AB-system), 8.01 (d, 2H, AB-system), 7.45–7.73 (m, 5H, arom-H), 11.80, 13.20 (2s, 2H, 2NH changeable with D2O). 13CNMR (DMSO-d6, 75 MHz) δppm): 12.09 (CH3), 108.81, 116.62, 118.61, 125.39, 128.01 (C=N), 129.85, 138.25, 138.90, 144.62, 149.15, 156.73 (C=O), 169.37 (C=N). Anal. Calcd for: C19H16N6O3S2 (440): C, 42.70; H, 3.94; N, 24.90; S, 11.40. Found: C, 42.60; H, 3.90; N, 24.80; S, 11.50 (see Fig. 3, Fig. S1).
(a) 1H NMR and (b) 13C NMR spectrum of the synthesized compound 6a.
This compound was produced from sulfadimidine. 3b (0.1 mol) and 1-Phenyl-3-methyl-5-pyrazolone 2 (0.1 mol) in the same way that was explained for the preparation of 6a.
Orange color solid. m.p. 165–166 °C, yield 92%. IR (KBr, cm–1): 323 3(NH), 3020 (CH-arm), 2925 (CH-alph), 1693 (C=O), 1597 (N=N), 1344, 1153 (SO2); 1HNMR (400 MHz, DMSO-d6) δ: 2.29 (s, 3H, CH3), 2.42 (s, 6H, 2CH3), 6.79 (s, 1H, pyrimidine-H), 7.24–7.90 (m, 9H, arom-H), 12.80, 13.30 (2s, 2H, 2NH exchangeable with D2O). 13CNMR (DMSO-d6, 75 MHz) δ (ppm): 12.17 (CH3-pyrazoline), 23.48 (CH3-yrimidine), 116.07, 118.39, 129.56, 130.47 (C=N), 137.81, 138.26, 144.98, 147.79 (C=N), 149.26, 154.15, 156.63 (C=O), 162.39, 162.90 (C=N), 167.90 (C=N). Anal. Calcd for: C22H21N7O3S (463): C, 57.01; H, 4.57; N, 21.15; S, 6.92. Found: C, 57.00; H, 4.50; N, 21.10; S, 6.90 (see Fig. 4).
(a) 1H NMR and (b) 13C NMR spectrum of the synthesized compound 6b.
Mild steel (MS) of the following chemical structure (wt%): C—0.093, P—0.014, Si—0.011, Mn—0.853, Cr—0.025, Cu—0.012, Al—0.032, Ni—0.013 and Fe—In the experiments, balancing was used38.
Experiments were conducted on MS in 1 M HCl acid (with and without inhibitors) to measure the weight loss. The MS sheets utilized have dimensions of 5 × 1 × 0.1 cm. The sheets were polished to variable degrees to achieve different granulation grades (SiC 1200 and 1400). The test solution was placed in a 250 mL glass vessel for each run. A clean weight was placed in an upright position and filled to the top of the jar. The plates are dried by air after being warmed. Millilitter of the test solution rinsed and dried in ethanol. A clean weight sample of mild steel was placed in an inclined position in the jar. The specimen was removed and cleaned with distilled water to remove abrasion products after spending a day immersed in 1 M HCl (uninhibited and inhibited) with the addition of different dosages of inhibitors. The plates are then heated air dried. ethanol-washed, dried, and weighed. Thermostat-controlled experiments were conducted at constant temperatures of 298, 303, 313, and 323 K in freshly produced solutions. The corrosion rate (CR) was calculated using the weight loss39.
The tests were performed using an electrochemical cell with three electrodes that has a saturated calomel electrode (SCE) as the reference electrode, a platinum wire as the counter electrode, and MS with a surface area of 1 cm2. In this study, electrochemical impedance spectroscopy, electrochemical frequency modulation, and electrochemical potentiodynamic polarization approaches have all been measured in turn. Electrochemical impedance spectroscopy (EIS) was performed using an electrode that had been submerged in the test for an hour. The EIS measurements were made at open-circuit voltage (OCV) with a small alternating voltage perturbation (10 mV) applied to the cell over the frequency range of 100 kHz to 20 mHz at 298 K. Second, electrochemical frequency modulation (EFM) was carried out using two frequencies of 2 and 5 Hz and an AC amplitude of 10 mV. Potentiodynamic polarization was also detected for anodic and cathodic polarization at a scan rate of 5 mV s−1. With the use of the Gamry 3000 potentiostat/galvanostat/ZRA and Echem Analyst 7 software, all of these methods were measured40.
Quantum chemical calculations of many parameters were calculated using the (DFT) method. DFT using Becke’s three parameter exchange functional (B3LYP) at the 6-311G (d,p) basis set41 drawn in the GaussView 5.0 with Gaussian 09W program package42. Quantum chemical parameters such as the highest occupied molecular orbital (EHOMO), the lowest unoccupied molecular orbital (ELUMO), the energy gap (ΔE), the electron affinity EA, the ionization potential IP, the electronegativity (χ), the global hardness (η), the softness (σ), the electrophilicity index (ω), dipole moment (DM), total energy (TE), total negative charges and the fraction of electrons transferred ΔN were calculated by the following Eqs. (1)–(6)43,44,45,46.
where χFe ≈ 7 eV41 is taken for iron and ηFe = 0 is taken, assuming that the ionization potential, I, equal the electron affinity, A, for bulk metals where χFe and ηFe are 7 and 0 respectively42.
In the present work, the intermediate 3-methyl-I-phenyl-5-pyrazolone (2), named Edaravone (Radicava), was obtained quantitatively via the Knorr condensation reaction of ethyl acetoacetate 1 with phenyl hydrazine37. The formation of compound 2 is assumed via nucleophilic attack of the least hindered nitrogen atom of phenyl hydrazine on the ketone moiety of ethyl acetoacetate followed by intramolecular cyclization involving the ester and the second nitrogen atom of phenyl hydrazine37.
The reaction of 3-methyl-I-phenyl-5-pyrazolone 2 withdiazonium chloride of sulfathiazole 3a gave 4-(2-(3-methyl-5-oxo-1-phenyl-1H-pyrazol-4(5H)-ylidene)hydrazinyl)-N-(thiazol-2-yl) benzenesulfonamide 6a rather than the other possible structure 5, Fig. 2. The synthesis involved initial diazotization of sulfathiazole 3a with sodium nitrite in hydrochloride solution to afford the diazonium salt 4, followed by coupling with a molar equivalent of the appropriate pyrazolone 2 in ethanol in the presence of sodium acetate at room temperature. The structure of compound 6a was established based on its analytical and spectral data. The infrared spectrum of the compound 6a showed the characteristic absorption band at 3100 cm−1 for the NH stretching: 1689 cm−1 for the C=O stretching and 1595 cm−1 for the N=N stretching vibrations (Fig. S2). The 1HNMR spectrum of compound 6a (DMSO-d6) declared the lack of singlet characteristic for methine proton and showed a merged singlet of methyl protons attached to the 3rd position of the pyrazole ring at δ 2.25 ppm. In the aromatic region a multiplet was obtained at δ 7.45–7.73 ppm indicating the presence of five phenyl protons and two doublets at δ 7.89, 8.01 ppm assigned to the AB-system of benzene sulfonamide moiety in addition to the presence of two downfield signals at δ 11.80, 13.20 ppm assigned to the NH protons. 13CNMR spectral data of the compound showed a methyl group carbon at δ 12.09 and a carbonyl carbon downfield at δ 156.73. The other peaks of carbon were observed at δ 108.81, 116.62, 118.61, 125.39, 128.01 (C=N), 129.85, 138.25, 138.90, 144.62, 149.15, 169.37 (C=N) confirming the presence of nineteen carbons in the compound. The structure of compound 6a was further confirmed by mass spectral data which showed molecular ion peak M+ at m/z 440 corresponding to molecular formula C19H16N6O3S2. The coupling reactions involved that initially generate strong +N2 electrophile from amine then finally react and coupled at active methylene group in pyrazolone 2 to produce compound 6, Fig. 2. In a similar manner, compound 2 reacted with diazonium chloride of sulfadimidine 3b at room temperature and afforded the N-(4,6-dimethyl pyrimidin-2-yl)-4-(2-(3-methyl-5-oxo-1-phenyl-1H-pyrazol-4(5H)ylidene)hydrazinyl)benzenesulfonamide 6b in a good yield. The structure of the isolated product was confirmed because of its elemental analysis and spectral data. The infrared spectrum of compound 6b showed strong bands at 1693 cm−1 which were due to carbonyl stretching of pyrazolone moiety. The compound showed bands at 3020 cm−1 and 2925 cm−1 which are due to aromatic C–H stretching and stretching aliphatic C–H vibration respectively. As shown in Fig. S2, bands observed at 1579, 1348, and 1153 cm−1 are assignable for N=N and SO2 groups, respectively. The 1H NMR spectrum of compound 6b showed two singlets at δ 2.29 and 2.42 ppm indicating the presence of methyl groups at pyrazoline and pyrimidine moieties, respectively. The singlet signal observed at δ 6.79 ppm assigned to the methine proton present at 5th position of pyrimidine ring. A multiplet was observed in the aromatic region at δ 7.24–7.90 ppm indicating the presence of protons of two aromatic rings and in addition to the presence of two downfield signals at δ 12.80, 13.30 ppm assigned to the NH protons. The 13C-NMR spectrum of compound 6b showed signals at δ 12.17, 23.48, 116.07, 118.39, 129.56, 130.47 (C=N), 137.81, 138.26, 144.98, 147.79 (C=N), 149.26, 154.15, 156.63, 162.39, 162.90 (C=N), 167.90 (C=N) corresponding to twenty-two different type of carbon atoms present in the compound. The most downfield signal appeared at δ 156.63 can be assigned to the carbonyl carbon of group in pyrazoline nucleus. The signals appeared at δ 12.17.84 and 23.48 can be assigned to methyl carbon of pyrazoline and pyrimidine, respectively.
A first step in the investigation of how to stop a metal from corroding in an electrolytic solution is to evaluate mass loss. This approach has the benefit of being easy to use and requiring little equipment. In 1 M HCl, the mild steel samples are submerged, both with and without the addition of various quantities of (6a and 6b). Utilizing a thermostatic bath, efficiency inhibitory activity is assessed after 1 day of immersion at 298, 303, 313, and 323 K. The indicated inhibitory effectiveness value is the average of three experiments performed for each concentration under identical conditions according to the following relations (7) and (8):
where K is a constant (8.76 × 104), ∆W is the loss of weight after corrosion (mg), A is the metal surface area (cm2); t is the immersion time (h), d is the metal density (g/cm3).
The inhibition efficiency (IEWL, %) and surface coverage (θ) of inhibitors were calculated using the following expression46:
where CRun and CRin are the corrosion rates of mild steel due to the dissolution in 1 M HCl in the absence and the presence of a definite concentration of inhibitor, respectively.
Table 1 displays the MS corrosion characteristics in 1 M HCl with and without various amounts of (6a and 6b) at 298 K. The calculated values of corrosion rate, inhibition efficiency (IE percent), and the extent of surface coverage for MS dissolution in 1 M HCl in the absence and presence of the two inhibitors of (6a and 6b) indicated their ability to prevent corrosion of MS in 1 M HCl solutions, where the corrosion rate is concentration dependent. It is clear from Table 1 that at all doses utilized in this investigation, (6a and 6b) suppress mild steel corrosion in 1 M HCl solutions. The corrosion rate is shown in Fig. 5 to continuously decrease with increasing inhibitor concentration. Corrosion rate values for mild steel also decrease as inhibitor concentration rises, whereas (IE percent) values for (6a and 6b) rise as concentration rises, reaching maximum values at (95.17 and 94.02 percent) at 500 ppm, respectively. Adsorption on the metal surface can be used to explain the (IE percent) prevention of mild steel corrosion. The interaction between the metal surface and the lone pairs of electrons on the nitrogen and sulfur atoms of the inhibitor can cause these compounds to be adsorbed. The iron atom’s unoccupied low energy orbitals help to assist this reaction47,48. It was shown also that the corrosion rate depended on molecular weight. As molecule weight increases the inhibition efficiency increases49.
Relationship between corrosion rate (CR) and inhibition efficiency (ηp) with inhibitors concentrations at different temperatures of inhibitors in 1 M HCl.
Table 1 and Figure 5 provide evidence that, for MS at all investigated temperatures, (6a and 6b) are very effective corrosion inhibitors. Since it was anticipated that (6a and 6b) would desorb at higher temperatures and offer lesser inhibitory efficiency, this result caught everyone off guard. However, it appears that during the entire temperature range under study, the molecules are stable on the MS surface. This is a significant finding from a practical standpoint since a wider range of industrial processes that take place at somewhat higher temperatures can now use these inhibitors45.
Figure 6 show (plot of C/θ against C) gives straight lines with slope equal or nearly equal to 1.00 for four temperatures (298, 303, 313 and 323 K) and intercepts provide the calculation of the values of Kads are given in Table 2. The obtained results indicate that the adsorption of compounds under consideration on mild steel/acidic solution interface follows the Langmuir adsorption isotherm according to Eqs. (9) and (10).
Langmuir adsorption plots for mild steel in 1 M HCl solutions at the presence of different concentrations of the inhibitors at different temperatures.
As can be seen from Table 2, the addition of the inhibitors causes negative values of ∆G°ads, indicating that the adsorption of studied sulfonamide derivatives is a spontaneous process50 According to widespread consensus, adsorption types can be classified as physisorption for values of Goads up to − 20 kJ mol−1, and the inhibition is caused by electrostatic interactions between charged molecules and the charged metal. A covalent link is formed between the inhibitor molecules and the metal surface when the values are around − 40 kJ mol−1 or less, and this process is known as chemisorption51,52. According to Table 2, where the values of ∆Gºads in our experiments vary from − 29.06 to − 30.52 kJ mol−1, the adsorption of these sulfonamide derivatives is thought to involve two different types of interaction: chemisorption and physisorption53.
Temperature is one of the factors that can modify both the behavior of inhibitors and substrates in each aggressive medium. The organic compounds can dissolve more easily when the temperature increases. The increase in temperature can thus cause a weakening of the corrosion resistance of the metals54. To examine the influence of this parameter on the inhibitory efficiency of (6a and 6b), we conducted Wight loss measurements for temperatures equal to 298, 303, 313 and 323 K. The results obtained after 1 day of immersion time are summarized in Table 3. Table 3 shows that CR in 1 M HCl increases with increasing temperature. For all inhibitor concentrations, CR also increases with temperature, but takes lower values at high inhibitor concentrations. This allows us to observe that the (IE%) increases when the temperature decreases. This evolution is, however, more marked for the highest concentrations of the inhibitor.
Using the Arrhenius Eq. (11), the activation energy (Ea) for the corrosion process was obtained as follows55.
R is the gas constant (8.31 J/mol/K), A is the Arrhenius pre-exponential factor, and T is the temperature.
The Apparent activation energies (− Ea/2.303R) and pre-exponential factor (A) at different concentrations of (6a and 6b) are determined by linear regression between Log (CR) and 1/T Fig. 7. The activation energy values in the absence and in the presence of inhibitors at different temperatures are reported in (Table 3)56,57. In the presence of the inhibitor the values of Ea are higher than in its absence. This behavior is reported as being characteristic of a phenomenon of physisorption of the inhibitor on the surface of the metal. The recovery rate, which is very low at higher temperatures high, suggests that at these temperatures the rate of destruction of the physically adsorbed film increases faster than its formation rate. This phenomenon can also be explained by the fact that the corrosion process of the mild steel in the presence of the inhibitor does not depend only on the reaction that takes place on the surface of the bare metal, but also from the diffusion of ions iron through the adsorbed inhibitor layer. This confirms that the inhibitors at high concentrations participate in a stronger physical adsorption by the formation of a more adherent surface film and therefore more effective58,59.
Arrhenius plots for mild steel in 1 M HCl solution without and with different concentrations of the inhibitors.
The values of kinetic parameters such as enthalpy (ΔH) and entropy (ΔS) of corrosion process may be evaluated from the temperature effect on MS surface were obtained using Eq. (12)58.
where, h is Planck’s constant, NA is Avogadro’s number.
Enthalpy and entropy values of (6a and 6b) compounds on MS surface were calculated using the transition state Eq. (5). Figure 8 shows log (CR/T) against 1000/T, which give straight lines with a slope of − ∆H/2.303R and an intercept of [log(R/NAh) + (∆S/2.303R)] for MS in the absence and presence of (6a and 6b) compounds have concentration 50, 100, 200 and 500 ppm in 1 M HCl solution.
Transition state plots for mild steel dissolution in the absence and presence of the inhibitors.
In (Table 3) Values of ΔH* were found positive. Positive values indicate endothermic nature of mild steel dissolution process51,60. Endothermic process further indicates that mild steel dissolution reduces at lower temperatures and increases with increase in temperatures. Negative values of ΔS* are indicative of formation of activated complex in rate determining step, which represents association rather than dissociation step, meaning the decrease in disorder takes place on going from reactants to activated complex61,62.
Open circuit potential (OCP) curves for the corrosion of carbon steel in 1 M HCl in absence and presence of different concentrations of investigated inhibitors (VI, VII and VIII) at 298 K are shown in Fig. 9.
Open circuit potential plots for mild steel in 1 M HCl in absence and presence of different concentration of inhibitors 6a and 6b at 298 K.
Measurements using electrochemical impedance spectroscopy (EIS) are a valuable technique for characterizing a variety of electrochemical systems and comprehending the function of electrolytic processes, such as batteries, and the behavior of elements during corrosion. Figure 10 shows the Nyquist plots for MS at different concentrations for the investigation of corrosion.
Nyquist plots for mild steel in 1 M HCl in absence and presence of different concentration of inhibitors 6a and 6b at 298 K (the inset shows the equivalent circuit model used to fit the EIS data, and the solid line is the fitting data).
The capacitance loops show that mild steel corrosion and the formation of a surface barrier are predominantly controlled by the electron transfer process63. The equivalent circuit model, shown in Fig. 10, was used to fit the experimental data on mild steel’s impedance in the presence of inhibitors in 1M HCl. The solution resistance in this Figure is denoted by Rs (Ru), the charge transfer resistance is denoted by Rct (Rp), and the double-layer capacitance on the metal’s surface is denoted by (Cdl)36. Table 4 shows that the addition of an additive to a solution of 1 M HCl causes the Rct values for MS to increase, indicating that the charge transfer pathways are hindered.
Inhibition efficiency (IE(EIS)) and θ were calculated from the following Eqs. (13) and (14)46:
where Rct(inh) and Rct(unh) are charge transfer resistances in the presence and absence of an inhibitor, respectively
where the CPE exponent is n and Y0 is the CPE constant. The number n, which ranges from 0 to 1, represents the departure from the ideal behavior.
When the inhibitor was applied, the value of Cdl in Table 4 decreased, indicating a decrease in the local dielectric constant and/or an increase in the thickness of the electrical double layer, which suggests that the inhibitor molecules work by forming a protective layer at the metal surface64.
EFM is an electrochemical method for calculating the corrosion rate without prior knowledge of the Tafel constants. This method’s ability to assess the corrosion rate, Tafel parameters, and causative factors all in one data set. Table 5 provides the corrosion parameters for protection effectiveness, corrosion current density, Tafel constant, and causative factors (CF-2), (CF-3) for various concentrations in 1M HCl at 298 K.
Examples of the EFM intermodulation spectra of mild steel in 1 M HCl solutions in the absence and presence of various concentrations of the inhibitors 6a and 6b are shown in Fig. 11 at 298 K. Equation can be used to compute the surface coverage and the inhibition efficiency (IEEFM%)65:
where Icorr (inhibitors) and Icorr (blank) are corrosion current densities.
Intermodulation spectrums for the corrosion of in 1 M HCl solution at different inhibitor concentrations at 298 K.
This Table 5 clearly demonstrates that as the concentration of inhibitors increases, the values of Icorr decrease, indicating that (IEEFM) increases, indicating that the inhibitors prevent corrosion by adsorption on the MS surface by forming chemical and physical bonds and creating a barrier of protection that lowers the ratio of corrosion66.
According to the EFM theory, the values of the causality factors (CF-2, CF-3) are very similar to their theoretical values (2) and (3), indicating that Tafel slopes and corrosion current densities are correct67.
Polarization curves of MS in 1 M HCl solution at 298 K with different concentrations of the inhibitors are shown in Fig. 12. The percentage inhibition efficiency (IEPDP%) and the degree of surface coverage (θ), were calculated from Eq. (16)68.
Tafel plots for MS in 1 M HCl solution at different inhibitors concentrations at 298 K.
The plots of potential versus the logarithm of current density were used to display polarization curves. Table 6 includes a list of the corrosion characteristics, including corrosion potential (Ecorr), corrosion current density (Icorr), anodic and cathodic Tafel slopes (a and c), and percentage inhibition efficiency (IEPDP%). It is so clear that Icorr of anodic and cathodic reactions reduced with increasing the concentration of the inhibitor till reach the maximum that guarantee the inhibition process.
This barrier of defense is created on the surface of the mild steel by the heteroatoms and unsaturated bonds in the inhibitor. Based on the sort of reaction that often takes place in an acidic solution, an inhibitor can be categorized as either an anodic, cathodic, or mixed type inhibitor. The cathodic process, also known as the release of hydrogen gas, is the opposite of the anodic reaction, which involves the dissolving of metal and releasing electrons69.
The polished MS surface is extensive in the case of the MS without corrosion inhibitors seen in Fig. 13a, and this might be interpreted as severe surface damage. The surface smoothed out while the inhibitors 6a and 6b were present (Fig. 13b,c). This shows that the inhibitors adhered to the MS surface and created a layer of protection. These results are supported by EDX analysis, which reveals that the main components are just Fe, Ti, and O in the MS itself. While both S and C are present in the MS with 6a and 6b as inhibitors, those from 6a and 6b are the ones that are original.
SEM images and EDX of MS surface after 1 day immersed in 1 M HCl (a) blank, (b) 6a, and (c) 6b at 298 K.
Many factors affect how organic molecules inhibit metal corrosion in an acidic medium70 such as: the number of adsorption centers, the mode of interaction with the metal surface, the size and the molecular structure71 and in order to give more interpretations to the experimental results, different quantum parameters namely: EHOMO, ELUMO, ΔE = EHOMO − ELUMO, (σ), (η), (ω), (µ, Debye) and (ΔN). EHOMO (the energy of the first unoccupied molecular orbitalis commonly related to the molecule’s ability to transfer electrons. A high level of HOMO energy encourages a molecule’s ability to donate electrons to species possessing unfilled molecular orbitals whose energy level is low. On the other hand, ELUMO (the energy of the highest occupied molecular orbital) reflects the molecule’s ability to receive electrons. A low value of ELUMO represents that the molecule accepts electrons.
ΔE = EHOMO − ELUMO is the least energy required to excite an electron in a molecule. Therefore, a low value of ΔE leads in a considerable inhibitory effectiveness72,73,74,75. Table 7 gather the calculated quantum parameters for the 6a and 6b compounds. This table shows that, molecules with a low energy gap have better inhibitory efficiency, this is explained by the fact that these compounds readily move one or more electrons from the HOMO level to the empty “d” orbitals of iron, and thus enhancing the sharing of electrons between these molecules and the surface of the metal52,76. Furthermore, according to the literature, a rise in EHOMO values can speed up adsorption by affecting how species move across the adsorbed layer76. In Table 7, It was evident from the results that 6b is higher to 6a in terms of effectiveness.
A high absolute hardness value is a sign of a molecule’s excellent stability and low reactivity. Table 7 revealed that the η.p % values for the examined inhibitors drop as the hardness values rise. 6a is the hardest of the inhibitors (η = 1.2323). The inhibitor 6b has lowest hardness (η = 1.0769). The values of increasing hardness are in good agreement with the experimental IE % values.
The nucleophilic or electrophilic character of the molecule is shown by the electrophilicity index (ω) readings. In contrast, a low value of electrophilicity indicates that the molecule has a high tendency to function as a nucleophile. A high electrophilic value indicates that the molecule has a strong inclination to behave as an electrophile. A good electrophile is defined by a high value of ω and an excellent nucleophile is associated with a lower value of ω77. From the Table 7 the electrophilicity values increase as follows: (44.628 > 40.224 eV) with comparing electrophilicity index values with the IE exp% (95.17 > 94.02 at 298 K) for (6a and 6b) compounds, respectively.
Depending on the kind and nature of the molecules involved, the inhibitory effectiveness rises as the dipole moment value grows78. Table 7 illustrated that when the values of µ grew, so did the values of IE%. The highest value applies to the inhibitor 6b (6.6146 D). The lowest value for the inhibitor is 6a (6.0183D). By Lukovits’s study, if the value of ΔN < 3.6, the η.p % increase by increasing electron donating ability of inhibitor on the metal surface79,80,81. From Table 7, generally, values of ∆N range from 0.0314 to 0.0361. 6b indicates the highest value transfer of electron and hence greater IE%. Thus, the fraction of transmitted electrons is the largest for 6b as compared with other inhibitor 6a.
The Mullikan population analysis is employed to calculate the charge distribution across the entire skeleton of the molecule and to determine the adsorption sites of inhibitors82,83. The calculated Mulliken charges (Total negative charges) of selected atoms carbon, oxygen and nitrogen were presented in Table 7. It is predicted that 6a will contact the metal surface more often but 6a is expected to do so less.
The distribution of the HOMO and LUMO electron density of the molecules are represented in Fig. 14 We thus observe for all the inhibitory molecules, the distribution of the HOMO density is centered on the heteroatoms (S, N and o) of the pyrazol ring and benzene sulfonamide. The high inhibitory power of benzene sulfonamide can be attributed to the presence of aromatic substituents possessing “π” electrons encouraging the sharing of electrons between these compounds and the metal surface. In addition, the concentration of anions on the metal surface will enhance the adsorption of the cationic forms of the benzene sulfonamide inhibitors34. The nearest area near the sulphur atom has the greatest HOMO density values, which is concrete proof that sulphur is the nucleophilic center84,85,86. As a result, sulphur will readily establish the metal–metal connection rather than N or C atoms. Table 8 compares pyrazolone-sulfonamide hybrids inhibition activity with other related inhibitors36,87,88,89,90.
(a) The optimized molecular structure, homo, lumo and, total negative charge of the investigated 6a and 6b using (DFT) 6-311G (d,p) basis set method.
In this study two compounds successfully synthesized and characterized FTIR, 1H-NMR, 13C-NMR, and mass spectra. It was then used as inhibitor corrosion of mild steel in 1 M HCl by using the gravimetric method, electrochemical measurement, scanning electronic microscope analysis, and quantum chemical calculations. The studied chemicals’ inhibitory potency ranged from 76.99 to 96.651%. These compounds attach to the Langmuir adsorption isotherm during the adsorption process. A few isotherms and kinetic parameters for adsorption have been created and explored. The mechanism of inhibition is mixed type. The metal surface had a thin protective layer that acted as an inhibitor, according to analyses done with energy dispersive X-ray spectroscopy (EDX) and scanning electron microscopy (SEM).
Wensheng Fang, Wei Guo, … Bao Yu Xia
Matic Jovičević-Klug, Isnaldi R. Souza Filho, ... Dierk Raabe
Hanyu Huo, Ming Jiang, … Jürgen Janek
All data generated or analyzed during this study are included in this published article (and its Supplementary Information files).
Popova, A., Sokolova, E., Raicheva, S. & Christov, M. AC and DC study of the temperature effect on mild steel corrosion in acid media in the presence of benzimidazole derivatives. Corros. Sci. 45(1), 33–58 (2003).
Kaesche, H. & Hackerman, N. Corrosion inhibition by organic amines. J. Electrochem. Soc. 105(4), 191 (1958).
Khamis, E. The effect of temperature on the acidic dissolution of steel in the presence of inhibitors. Corrosion 46(6), 476–484 (1990).
Landolt, D. Corrosion and surface chemistry of metals Vol.12 (PPUR Presses Polytechniques, 2003).
Bénard, J. General metallurgy (Masson, 1969).
Abboud, Y. et al. The inhibition of mild steel corrosion in acidic medium by 2,2′-bis(benzimidazole). Appl. Surf. Sci. 252(23), 8178–8184 (2006).
Article ADS CAS Google Scholar
Verma, C., Ebenso, E. E., Bahadur, I. & Quraishi, M. A. An overview on plant extracts as environmental sustainable and green corrosion inhibitors for metals and alloys in aggressive corrosive media. J. Mol. Liq. 266, 577–590 (2018).
El-Awady, A. A., Abd-El-Nabey, B. A. & Aziz, S. G. Kinetic-thermodynamic and adsorption isotherms analyses for the inhibition of the acid corrosion of steel by cyclic and open-chain amines. J. Electrochem. Soc. 139(8), 2149 (1992).
Article ADS CAS Google Scholar
Mostfa, M. A., Gomaa, H., Othman, I. M. M. & Ali, G. A. M. Experimental and theoretical studies of a novel synthesized azopyrazole-benzenesulfonamide derivative as an efficient corrosion inhibitor for mild steel. J. Iran. Chem. Soc. 18(5), 1231–1241 (2021).
Ateya, B. G., El-Anadouli, B. E. & El-Nizamy, F. M. The adsorption of thiourea on mild steel. Corros. Sci. 24(6), 509–515 (1984).
Bentiss, F., Lagrenee, M., Traisnel, M. & Hornez, J. C. The corrosion inhibition of mild steel in acidic media by a new triazole derivative. Corros. Sci. 41(4), 789–803 (1999).
Frenier, W. & Growcock, F. Inhibitors for Chemical Cleaning Applications 11–201 (NACE International, 1993).
Mernari, B., El Attari, H., Traisnel, M., Bentiss, F. & Lagrenee, M. Inhibiting effects of 3,5-bis(n-pyridyl)-4-amino-1,2,4-triazoles on the corrosion for mild steel in 1 M HCl medium. Corros. Sci. 40(2), 391–399 (1998).
Zucchi, F., Trabanelli, G. & Brunoro, G. Iron corrosion inhibition in hot 4 M HCl solution by t-cinnamaldehyde and its structure-related compounds. Corros. Sci. 36(10), 1683–1690 (1994).
Mostafa, M. A., Ashmawy, A. M., Reheim, M. A. M. A., Bedair, M. A. & Abuelela, A. M. Molecular structure aspects and molecular reactivity of some triazole derivatives for corrosion inhibition of aluminum in 1 M HCl solution. J. Mol. Struct. 1236, 130292 (2021).
Sehmi, A. et al. Corrosion inhibition of mild steel by newly synthesized pyrazole carboxamide derivatives in HCl acid medium: Experimental and theoretical studies. J. Electrochem. Soc. 167(15), 155508 (2020).
Article ADS CAS Google Scholar
Murulana, L. C., Kabanda, M. M. & Ebenso, E. E. Investigation of the adsorption characteristics of some selected sulphonamide derivatives as corrosion inhibitors at mild steel/hydrochloric acid interface: Experimental, quantum chemical and QSAR studies. J. Mol. Liq. 215, 763–779 (2016).
Zhao, P., Liang, Q. & Li, Y. Electrochemical, SEM/EDS and quantum chemical study of phthalocyanines as corrosion inhibitors for mild steel in 1 mol/l HCl. Appl. Surf. Sci. 252(5), 1596–1607 (2005).
Article ADS CAS Google Scholar
Quraishi, M. A. & Sharma, H. K. 4-Amino-3-butyl-5-mercapto-1,2,4-triazole: A new corrosion inhibitor for mild steel in sulphuric acid. Mater. Chem. Phys. 78(1), 18–21 (2003).
Amin, M. A., Abd El Rehim, S. S. & Abdel-Fatah, H. T. M. Electrochemical frequency modulation and inductively coupled plasma atomic emission spectroscopy methods for monitoring corrosion rates and inhibition of low alloy steel corrosion in HCl solutions and a test for validity of the Tafel extrapolation method. Corros. Sci. 51(4), 882–894 (2009).
Morad, M. S. Inhibition of iron corrosion in acid solutions by Cefatrexyl: Behaviour near and at the corrosion potential. Corros. Sci. 50(2), 436–448 (2008).
Blustein, G., Di Sarli, A. R., Jaén, J. A., Romagnoli, R. & Del Amo, B. Study of iron benzoate as a novel steel corrosion inhibitor pigment for protective paint films. Corros. Sci. 49(11), 4202–4231 (2007).
Ashassi-Sorkhabi, H. & Asghari, E. Effect of hydrodynamic conditions on the inhibition performance of l-methionine as a “green” inhibitor. Electrochim. Acta 54(2), 162–167 (2008).
Reddyrajula, R., Dalimba, U. & Madan Kumar, S. Molecular hybridization approach for phenothiazine incorporated 1,2,3-triazole hybrids as promising antimicrobial agents: Design, synthesis, molecular docking and in silico ADME studies. Eur. J. Med. Chem. 168, 263–282 (2019).
Article CAS PubMed Google Scholar
de Castro, M. R. C. et al. Tandem chalcone-sulfonamide hybridization, cyclization and further Claisen–Schmidt condensation: Tuning molecular diversity through reaction time and order and catalyst. Arab. J. Chem. 13(1), 1345–1354 (2020).
Nehra, B. et al. Recent advancements in the development of bioactive pyrazoline derivatives. Eur. J. Med. Chem. 205, 112666 (2020).
Article CAS PubMed Google Scholar
Bailly, C., Hecquet, P.-E., Kouach, M., Thuru, X. & Goossens, J.-F. Chemical reactivity and uses of 1-phenyl-3-methyl-5-pyrazolone (PMP), also known as edaravone. Bioorg. Med. Chem. 28(10), 115463 (2020).
Article CAS PubMed Google Scholar
Dhaduk, M. & Joshi, H. Synthesis, characterization and biological study of some new N-acetyl pyrazole derivatives. Curr. Chem. Lett. 11(2), 199–206 (2022).
El-Nassan, H. B. Recent progress in the identification of BRAF inhibitors as anti-cancer agents. Eur. J. Med. Chem. 72, 170–205 (2014).
Article CAS PubMed Google Scholar
Faidallah, H. M. & Khan, K. A. Synthesis and biological evaluation of new barbituric and thiobarbituric acid fluoro analogs of benzenesulfonamides as antidiabetic and antibacterial agents. J. Fluorine Chem. 142, 96–104 (2012).
Chohan, Z. H., Youssoufi, M. H., Jarrahpour, A. & Ben Hadda, T. Identification of antibacterial and antifungal pharmacophore sites for potent bacteria and fungi inhibition: Indolenyl sulfonamide derivatives. Eur. J. Med. Chem. 45(3), 1189–1199 (2010).
Article CAS PubMed Google Scholar
Sayed, A. M. et al. Design, synthesis, molecular docking, in silico ADMET profile and anticancer evaluations of sulfonamide endowed with hydrazone-coupled derivatives as VEGFR-2 inhibitors. Bioorg. Chem. 108, 104669 (2021).
Article CAS PubMed Google Scholar
Yamali, C., Gul, H. I., Kazaz, C., Levent, S. & Gulcin, I. Synthesis, structure elucidation, and in vitro pharmacological evaluation of novel polyfluoro substituted pyrazoline type sulfonamides as multi-target agents for inhibition of acetylcholinesterase and carbonic anhydrase I and II enzymes. Bioorg. Chem. 96, 103627 (2020).
Article CAS PubMed Google Scholar
Ebenso, E. E., Arslan, T., Kandemirli, F., Caner, N. & Love, I. Quantum chemical studies of some rhodanine azosulpha drugs as corrosion inhibitors for mild steel in acidic medium. Int. J. Quant. Chem. 110(5), 1003–1018 (2010).
Article ADS CAS Google Scholar
Senet, P. Chemical hardnesses of atoms and molecules from frontier orbitals. Chem. Phys. Lett. 275(5), 527–532 (1997).
Article ADS CAS Google Scholar
Kamal, A.-B., Mostfa, M. A., Ashmawy, A. M., El-Gaby, M. S. A. & Ali, G. A. M. Corrosion inhibition behavior of the synthesized pyrazoline-sulfonamide hybrid of mild steel in aqueous solutions: Experimental and quantum investigations. J. Chem. Sci. 134(3), 90 (2022).
Fakhraian, H. & Nafari, Y. Preparative, mechanistic and tautomeric investigation of 1-phenyl and 1-methyl derivative of 3-methyl-5-pyrazolone. J. Chem. Sci. 133(2), 40 (2021).
Ahmed, Y. M., Ashmawy, A. M., Abbas, A. A. & Mohamed, G. G. Synthesis, characterization, antibacterial, antioxidant activities, DFT and MOE studies of new organic metal complexes and links to application of corrosion inhibitors. Appl. Organomet. Chem. 37, e7015 (2023).
Elsawy, A. M., Khalil, H. F. & Ashmawy, A. M. Chemical and electrochemical investigation of a novel liquid crystal as an anticorrosion agent for mild steel in acidic media. Egypt. J. Chem. https://doi.org/10.21608/ejchem.2022.142387.6224 (2022).
Ahmed, Y. M. et al. Synthesis, characterization, biological activity, DFT studies on transition metal complexes derived from 5, 5′-(propane-1, 3-diylbis (sulfanediyl)) bis (1, 3, 4-thiadiazol-2-amine) ligand and its corrosion inhibition study on carbon steel. J. Mol. Struct. 1280, 134956 (2023).
Zhang, S. G., Lei, W., Xia, M. Z. & Wang, F. Y. QSAR study on N-containing corrosion inhibitors: Quantum chemical approach assisted by topological index. J. Mol. Struct. 732(1), 173–182 (2005).
Pople, J., Frisch, M., Trucks, G., Schlegel, H. & Scuseria, G. Gaussian 09W (Revision A. 02) 6492 (Gaussian Inc., 2009).
Felhősi, I., Telegdi, J., Pálinkás, G. & Kálmán, E. Kinetics of self-assembled layer formation on iron.Electrochim.Acta 47(13), 2335–2340 (2002).
Gusmano, G., Labella, P., Montesperelli, G., Privitera, A. & Tassinari, S. Study of the inhibition mechanism of imidazolines by electrochemical impedance spectroscopy. Corrosion 62, 576 (2006).
Li, X., Deng, S., Fu, H. & Mu, G. Synergistic inhibition effect of rare earth cerium(IV) ion and anionic surfactant on the corrosion of cold rolled steel in H2SO4 solution. Corros. Sci. 50(9), 2635–2645 (2008).
Yadav, M., Kumar, S., Bahadur, I. & Ramjugernath, D. Corrosion inhibitive effect of synthesized thiourea derivatives on mild steel in a 15% HCl solution. Int. J. Electrochem. Sci. 9(11), 6529–6550 (2014).
Benali, O., Larabi, L., Merah, S. & Harek, Y. Influence of the Methylene Blue Dye (MBD) on the corrosion inhibition of mild steel in 0.5 M sulphuric acid, Part I: Weight loss and electrochemical studies. Environ. Sci. 2, 39–48 (2011).
Omar, B. & Mokhtar, O. Inhibition of cold rolled steel corrosion in sulphuric acid solution by 2-mercapto-1-methylimidazole: Time and temperature effects treatments. Arab. J. Chem. 4(4), 443–448 (2011).
Awad, M. K., Metwally, M. S., Soliman, S. A., El-Zomrawy, A. A. & Bedair, M. A. Experimental and quantum chemical studies of the effect of poly ethylene glycol as corrosion inhibitors of aluminum surface. J. Ind. Eng. Chem. 20(3), 796–808 (2014).
Dahmani, M., Et-Touhami, A., Al-Deyab, S., Hammouti, B. & Bouyanzer, A. Corrosion inhibition of C38 steel in 1 M HCl: A comparative study of black pepper extract and its isolated piperine. Int. J. Electrochem. Sci. 5(8), 1060–1069 (2010).
Szklarska-Smialowska, Z. & Mankowski, J. Crevice corrosion of stainless steels in sodium chloride solution. Corros. Sci. 18(11), 953–960 (1978).
Benali, O., Larabi, L., Mekelleche, S. M. & Harek, Y. Influence of substitution of phenyl group by naphthyl in a diphenylthiourea molecule on corrosion inhibition of cold-rolled steel in 0.5 M H2SO4. J. Mater. Sci. 41, 7064–7073 (2006).
Article ADS CAS Google Scholar
Zhang, S., Tao, Z., Li, W. & Hou, B. The effect of some triazole derivatives as inhibitors for the corrosion of mild steel in 1 M hydrochloric acid. Appl. Surf. Sci. 255(15), 6757–6763 (2009).
Article ADS CAS Google Scholar
Crousier, J., Antonione, C., Massiani, Y. & Crousier, JP Effect of chromium on the corrosion resistance of amorphous Fe–Ni–B–P alloys in H2SO4 0.1 N. Mater.Chem.7(5), 587–604 (1982).
Stoyanova, A. E., Sokolova, E. I. & Raicheva, S. N. The inhibition of mild steel corrosion in 1 M HCl in the presence of linear and cyclic thiocarbamides—Effect of concentration and temperature of the corrosion medium on their protective action. Corros. Sci. 39(9), 1595–1604 (1997).
Ben Hmamou, D. et al. Inhibition effect of horehound (Marrubium vulgare L.) extract towards C38 steel corrosion in HCl solution. Res. Chem. Intermed. 39(7), 3291–3302 (2013).
Benali, O., Selles, C. & Salghi, R. Inhibition of acid corrosion of mild steel by Anacyclus pyrethrum L. extracts. Res. Chem. Intermed. 40(1), 259–268 (2014).
Martinez, S. & Stern, I. Thermodynamic characterization of metal dissolution and inhibitor adsorption processes in the low carbon steel/mimosa tannin/sulfuric acid system. Appl. Surf. Sci. 199(1), 83–89 (2002).
Article ADS CAS Google Scholar
Migahed, M. A., Mohamed, H. M. & Al-Sabagh, A. M. Corrosion inhibition of H-11 type carbon steel in 1 M hydrochloric acid solution by N-propyl amino lauryl amide and its ethoxylated derivatives. Mater. Chem. Phys. 80(1), 169–175 (2003).
Behpour , M. , Ghoreishi , SM , Khayatkashani , M. & Soltani , N. The effect of two oleo-gum resin exudate from Ferula assa-foetida and Dorema ammoniacum on mild steel corrosion in acidic media .Corros.Sci.53(8), 2489–2501 (2011).
Gomma, G. K. & Wahdan, M. H. Schiff bases as corrosion inhibitors for aluminium in hydrochloric acid solution. Mater. Chem. Phys. 39(3), 209–213 (1995).
Mu, G. N., Li, X. & Li, F. Synergistic inhibition between o-phenanthroline and chloride ion on cold rolled steel corrosion in phosphoric acid. Mater. Chem. Phys. 86(1), 59–68 (2004).
Soltani, N., Behpour, M., Ghoreishi, S. M. & Naeimi, H. Corrosion inhibition of mild steel in hydrochloric acid solution by some double Schiff bases. Corros. Sci. 52(4), 1351–1361 (2010).
Liu, F. Effects of nickel and silicon content on the corrosion inhibition of weathering steels in simulated coastal environments. Int. J. Electrochem. Sci. 16, 151017 (2021).
Ashmawy, A. M., El-Sawy, A. M. & Khalil, H. F. Synthesis of novel liquid crystal compound and study of its behavior as corrosion inhibitor for mild steel in acidic medium (1 M) HCl. Mol. Cryst. Liq. Cryst. 736(1), 9–29 (2022).
Deghadi, R. G., Elsharkawy, A. E., Ashmawy, A. M. & Mohamed, G. G. Can one novel series of transition metal complexes of oxy-dianiline schiff base afford advances in both biological inorganic chemistry and materials science? Comments Inorg. Chem. 42(1), 1–46 (2022).
Bosch, R. W., Hubrecht, J., Bogaerts, W. F. & Syrett, B. C. Electrochemical frequency modulation: A new electrochemical technique for online corrosion monitoring. Corrosion 57(1), 60–70 (2001).
Abdel-Rehim, S. S., Khaled, K. F. & Abd-Elshafi, N. S. Electrochemical frequency modulation as a new technique for monitoring corrosion inhibition of iron in acid media by new thiourea derivative. Electrochim. Acta 51, 3269–3277 (2006).
Deyab, M. A., Ashmawy, A. M., Nessim, M. I. & Mohsen, Q. New Gemini surfactants based on alkyl benzenaminium: Synthesis and links to application of corrosion protection. J. Mol. Liq. 332, 115855 (2021).
Özcan, M., Dehri, İ & Erbil, M. Organic sulphur-containing compounds as corrosion inhibitors for mild steel in acidic media: Correlation between inhibition efficiency and chemical structure. Appl. Surf. Sci. 236(1), 155–164 (2004).
Fouda, A. S. & Ellithy, A. S. Inhibition effect of 4-phenylthiazole derivatives on corrosion of 304L stainless steel in HCl solution. Corros. Sci. 51(4), 868–875 (2009).
Khaled, K. F. & Al-Qahtani, M. M. The inhibitive effect of some tetrazole derivatives towards Al corrosion in acid solution: Chemical, electrochemical and theoretical studies. Mater. Chem. Phys. 113(1), 150–158 (2009).
Finley, H. F. & Hackerman, N. Effect of adsorption of polar organic compounds on the reactivity of steel. J. Electrochem. Soc. 107(4), 259 (1960).
Khalil, N. Quantum chemical approach of corrosion inhibition. Electrochim. Acta 48(18), 2635–2640 (2003).
Bereket, G., Hür, E. & Öğretir, C. Quantum chemical studies on some imidazole derivatives as corrosion inhibitors for iron in acidic medium. J. Mol. Struct. 578(1), 79–88 (2002).
Mohamed, A., Rakha, T. & Moussa, M. H. Effect of 4-arylhydrazono-2-pyrazolin-5-one derivatives on the corrosion of aluminium in hydrochloric acid solution. Bull. Soc. Chim. Fr. 3, 375–380 (1990).
Kathirvel, K., Thirumalairaj, B. & Jaganathan, M. Quantum chemical studies on the corrosion inhibition of mild steel by piperidin-4-one derivatives in 1 M H3PO4. Open J. Metal 04(04), 73–85 (2014).
Al-Sabagh, A. M. et al. Structure effect of some amine derivatives on corrosion inhibition efficiency for carbon steel in acidic media using electrochemical and quantum theory methods. Egypt. J. Petrol. 22(1), 101–116 (2013).
Ebenso, E. E. et al. Theoretical studies of some sulphonamides as corrosion inhibitors for mild steel in acidic medium. Int. J. Quant. Chem. 110(14), 2614–2636 (2010).
Lukovits, I., Kálmán, E. & Zucchi, F. Corrosion inhibitors—Correlation between electronic structure and efficiency. Corrosion 57(1), 3–8 (2001).
Martinez, S. Inhibitory mechanism of mimosa tannin using molecular modeling and substitutional adsorption isotherms. Mater. Chem. Phys. 77(1), 97–102 (2003).
Ebenso, E. E. et al. Quantum chemical investigations on quinoline derivatives as effective corrosion inhibitors for mild steel in acidic medium. Int. J. Electrochem. Sci. 7(6), 5643–5676 (2012).
Slater, J. C. Introduction to Chemical Physics (Dover Publications, 1970).
Larabi, L., Benali, O., Mekelleche, S. M. & Harek, Y. 2-Mercapto-1-methylimidazole as corrosion inhibitor for copper in hydrochloric acid. Appl. Surf. Sci. 253(3), 1371–1378 (2006).
Article ADS CAS Google Scholar
Lagrenée, M., Mernari, B., Bouanis, M., Traisnel, M. & Bentiss, F. Study of the mechanism and inhibiting efficiency of 3,5-bis(4-methylthiophenyl)-4H-1,2,4-triazole on mild steel corrosion in acidic media. Corros. Sci. 44(3), 573–588 (2002).
Benali, O., Larabi, L., Traisnel, M., Gengembre, L. & Harek, Y. Electrochemical, theoretical and XPS studies of 2-mercapto-1-methylimidazole adsorption on carbon steel in 1M HClO4. Appl. Surf. Sci. 253(14), 6130–6139 (2007).
Article ADS CAS Google Scholar
Verma, C. et al. Aryl sulfonamidomethylphosphonates as new class of green corrosion inhibitors for mild steel in 1M HCl: Electrochemical, surface and quantum chemical investigation. J. Mol. Liq. 209, 306–319 (2015).
D’Souza, P. R., Kudva, J., Kumar, A. S. & Shetty, A. N. Experimental and computational studies of N-(4,6-dimethylpyrimidin-2-yl)-4-[(quinazoline-4-yl)amino]-benzene-1-sulfonamide as an effectual corrosion inhibitor for mild steel in hydrochloric acid. Russ. J. Appl. Chem. 94(8), 1122–1133 (2021).
El-Naggar, M. M. Corrosion inhibition of mild steel in acidic medium by some sulfa drugs compounds. Corros. Sci. 49(5), 2226–2236 (2007).
Obot, I. B., Ebenso, E. E., Akpan, I. A., Gasem, Z. M. & Afolabi, A. S. Thermodynamic and density functional theory investigation of sulphathiazole as green corrosion inhibitor at mild steel/hydrochloric acid interface. Int. J. Electrochem. Sci. 7(3), 1978–1996 (2012).
Open access funding provided by The Science, Technology & Innovation Funding Authority (STDF) in cooperation with The Egyptian Knowledge Bank (EKB).
Chemistry Department, Faculty of Science, Al-Azhar University, Nasr City, Cairo, 11884, Egypt
Ashraf M. Ashmawy & M. S. A. El-Gaby
Chemistry Department, Faculty of Science, Al-Azhar University, Assiut, 71524, Egypt
MA Mostafa, Abo-Bakr Kamal & Gomaa AM Ali
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
A.M.A.: Conceptualization; Data curation; Formal analysis; Investigation; Methodology; Project administration; Resources; Software; Validation; Visualization; Roles/Writing—original draft; Writing—review & editing. M.A.M.: Roles/Writing—original draft; quantum chemical computations; Writing—review & editing. A.-B.K.: Methodology, Writing—original draft. G.A.M.A.: Data curation; Resources; Software; Validation; Visualization; Roles/Writing—original draft; Writing—review & editing. M.S.A.E.-G.: Conceptualization; Roles/Writing—original draft; Writing—review & editing.
Correspondence to Ashraf M. Ashmawy, Gomaa A. M. Ali or M. S. A. El-Gaby.
The authors declare no competing interests.
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
Ashmawy, A.M., Mostafa, M.A., Kamal, AB. et al. Corrosion inhibition of mild steel in 1 M HCl by pyrazolone-sulfonamide hybrids: synthesis, characterization, and evaluation. Sci Rep 13, 18555 (2023). https://doi.org/10.1038/s41598-023-45659-2
DOI: https://doi.org/10.1038/s41598-023-45659-2
Anyone you share the following link with will be able to read this content:
Sorry, a shareable link is not currently available for this article.
Provided by the Springer Nature SharedIt content-sharing initiative
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.
Scientific Reports (Sci Rep) ISSN 2045-2322 (online)
Ground Marble Bridging Agent Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.