In the transition to lower-GWP refrigerants, specifying engineers and contractors play an essential role in helping retailers make next-generation equipment decisions. Among the emerging alternatives, A2L refrigerants will likely have a place in both self-contained and remote system architectures. With available options below 150 and 300 GWP, A2Ls can help end users meet the Environmental Protection Agency’s (EPA’s) GWP limits across numerous sectors.
As a new refrigerant in the commercial refrigeration sector, the A2L “lower flammability” classification comes with unique considerations. To ensure safety and alleviate retailers’ other concerns as well, specifying engineers and contractors must educate themselves on new safety requirements and risk mitigation measures pertaining to applications, equipment, and component designs. air handling unit heat exchanger
Ensuring electrical system safety compliance is a chief design consideration with A2L-optimized equipment, as powered electrical components could be potential ignition sources upon contact with a flammable concentration of gas. The Underwriters Laboratories (UL) 60335-2-89, 2nd edition safety standard provides guidelines for the safe use of flammable A3 and A2L refrigerants in commercial refrigeration equipment, including requirements for electrical components.
The UL 60335-2-89, 2nd edition standard establishes design strategies based on the lower flammability limit (LFL) of an A2L, which includes charge limit allowances, leak rates, and detection requirements. LFL is based on the worst-case formulation (WCF) — or maximum refrigerant burning velocity — of all A2L refrigerants being considered for approval.
Because electrical sparks or charges could be potential sources of ignition, specifying engineers and contractors must be sure that equipment uses only certified electrical componentry, which requires equipment and component manufacturers to follow applicable testing procedures and safety clauses. Examples of electrical componentry found within compressors and condensing units include:
From a high-level perspective, it’s important for specifying engineers and contractors to understand how UL 60335-2-89, 2nd edition delineates between protected and unprotected systems, as well as the different requirements for achieving A2L system certification in each:
For unprotected systems, A2L safety compliance and/or certification may be achieved either through individual component-level certification or at a higher level that encompasses the entire system in an electrical enclosure. Only one certification approach is necessary to achieve compliance; Copeland is currently qualifying its electrical components for individual certification.
For individual component level certification, per UL 60335-2-89, 2nd edition, Annex 101.DVL, electrical components, relays, or devices used on appliances designed for A2Ls must adhere to tight enclosure tolerances. These requirements are also in accordance with UL 60079-15 standard (Clause Annex BB) for non-sparking electrical apparatus.
Essentially, the maximum size of openings — physical gaps (i.e., holes) in a device’s enclosure in which air could enter and/or fire could escape — must be limited to prevent flame propagation to the outside. Thus, even if a device is sparking and/or has ignited on the inside, flame will not escape or propagate outside of the component.
Annex 101.DVL defines this opening as the effective diameter — which is the equivalent diameter of the opening of relays and similar components — via the following calculation:
Thus, relays and similar electrical components are not considered as potential ignition sources if the effective diameter of all openings complies with the following calculation:
There are certification exceptions for certain relays and/or switching devices. Per UL 60335-2-89, 2nd edition, Clause 22.111.1DV, those that are not considered ignition sources are deemed inherently compliant to the standard and do not need to be tested for compliance with the UL standard. To qualify for this exception, these devices must meet the following criteria:
See UL 60335-2-89, 2nd edition, Clause 22.111.1DV for more information on compliance measurement and testing.
For electrical enclosures and/or system level certification, UL 60335-2-89, 2nd edition, Annex 101.DVM provides a comprehensive range of testing requirements to certify that they comply with its flame-arrest enclosure verification standard. A flame-arrest enclosure is defined as a “device or assembly enclosing components with electrical contacts that are made and broken, or similar devices which can become a source of ignition.”
A qualifying enclosure must be able to withstand the internal ignition of leaked A2L refrigerant vapor, without suffering damage and transmitting flame to an external concentration of the same refrigerant. Note: qualified individual electrical components contained within a flame-arrest enclosure are not to be considered as sources of ignition.
If all openings in the flame-arrest enclosure comply with the Annex 101.DVM standard, the enclosure is considered compliant.
Regardless of all other testing and certification measures, the surface temperature limits of affected electrical devices must also be factored into the A2L safety equation. Per Clause 22.114 in the UL 60335-2-89, 2nd edition standard, surface temperatures cannot exceed those defined in Table 102.DV (see Table 1).
TABLE 1: A2L flammability characteristics and maximum surface temperatures.
A2L refrigerants have vast potential in the commercial refrigeration sector, delivering a unique combination of lower GWP, high performance, and energy efficiency. By using equipment and components optimized and certified for A2L refrigerants, specifying engineers and contractors can help their retail customers safely transition to this emerging refrigerant.
Copeland is committed to developing safe, A2L-optimized compression, controls, and electrical componentry to give specifying engineers and contractors a range of system options from which to support their customers’ next-gen equipment strategies. We have the application and engineering expertise — and flammable refrigerant testing facilities — to help maximize equipment safety using the next generation of low-GWP refrigerants.
OPTIMIZED FOR A2L: Copeland is committed to developing safe, A2L-optimized compression, controls, and electrical componentry. (Courtesy of Copeland)
New equipment designs are also leveraging variable-speed compression technology to help retailers improve system energy efficiencies, performance, and reliability. The solution combines efficient scroll compressors with VFDs, which are yet other electrical components that must be certified for use in A2L refrigeration systems.
Per UL 60335-2-89, 2nd edition, VFDs are required to be certified to the UL 61800-5-1 standard for adjustable speed electrical power drive systems. This standard focuses on functional safety, thermal protection, and the reliability of components under various conditions, including the potential for flammability in systems using A2Ls. In addition, UL 61800-5-2 requires power drive systems to meet a level 2 safety integrity level (SIL) — either as a stand-alone unit or a part of a system.
UL 61800-5-1 defines specific spacing requirements for the placement of components within a VFD. Relays, metal oxide varistors, and transformers all must be evaluated and modified to ensure fail-safe and non-sparking characteristics.
Under UL 60335-2-89, 2nd edition, VFD certification via the UL 508C standard for power conversion equipment is no longer supported. UL 61800-5-1 ensures a higher level of safety and reliability in applications of VFDs in critical safety environments, such as those using A2L refrigerants. Specifying engineers and contractors should make sure to select drives certified under the UL 61800-5-1 standard.
Looking for a reprint of this article? From high-res PDFs to custom plaques, order your copy today!
Already have an account? Sign In
Sponsored Content is a special paid section where industry companies provide high quality, objective, non-commercial content around topics of interest to The News audience. All Sponsored Content is supplied by the advertising company and any opinions expressed in this article are those of the author and not necessarily reflect the views of The News or its parent company, BNP Media. Interested in participating in our Sponsored Content section? Contact your local rep!
During this webinar, we will discuss what acidic condensate is, how it’s formed, and the damage it can cause if not properly treated—while hitting on the latest regulations that are driving the adoption of condensing technology.
On Demand Use the power of AI to your advantage to book more jobs and gain more operational efficiencies during busy season this year! See how an AI Employee can help you save time by qualifying every lead for you, automatically responding to incoming leads, and working overtime so you don’t have to.
Copyright ©2025. All Rights Reserved BNP Media.
closed air refrigeration system Design, CMS, Hosting & Web Development :: ePublishing