888-776-0942 from 8 AM - 10 PM ET
SCHAUMBURG, Ill. , June 13, 2024 /PRNewswire/ -- Heat is never welcome in an enclosure. It is crucial to remove heat and to avoid further warming wherever possible to ensure trouble-free operation of the installed components. Rittal now offers a new generation of Blue e+ fan-and-filter units boasting an emergency cooling function and many other innovative features geared to smart climate control. Bathroom Air Purifier
Fan-and-filter units are a popular and cost-effective solution wherever ambient air can be used to regulate the temperature in an enclosure. They are by far the most frequent choice for enclosure climate control. This new generation provides a smarter approach to cooling system maintenance; with its emergency cooling function, for example, the new Blue e+ fan-and-filter unit responds actively to compensate for an unexpected temperature rise. This protects components from overheating and avoids the costs associated with a system shutdown.
The last generation of fan-and-filter units was already designed for tool-free mounting and maintenance, but the relevant mechanical components have now been given a full makeover. The snap-in hooks for unit mounting and the opening mechanism for filter replacement now function even more smoothly. Proven features such as simple reversal of the air flow direction and flexible positioning of the power connection have been retained. Further modifications relate to the overall Rittal design with the grille slats now arranged vertically. This has all been done without affecting the protection rating.
Intelligence Packed into a Minimum of Space
Blue e+ fan-and-filter units are available in five sizes, covering eight output classes from 15 CFM to 683 CFM (20 m 3/h to 1,160 m 3/h) air throughput. The AC/DC models cater to all basic requirements, while an EMC variant is available for applications that place special demands on the electromagnetic shielding of housings. EC technology permits speed control and fan monitoring via an analogue interface. Temperature regulation is adapted to the actual conditions – a smart function that saves energy and extends the service life. The new generation offers further benefits such as a wide power input range (100–240 V) and a ModBus interface for monitoring, control, and alarm functionalities.
Full Control via an IoT Interface
Fan-and-filter units that are integrated via the Rittal IoT interface supply information on status, capacity utilization, operating hours, and energy consumption. If several enclosures are standing nearby, therefore, it is possible to locate the exact source of critical heat build-ups and to determine the associated fan-and-filter unit. The operator is informed, and the emergency cooling function of the fan-and-filter unit is activated as soon as the temperature exceeds the alarm threshold value. An increase in fan speed and thus air throughput delays possible overheating. The fan-and-filter unit returns to its normal operating mode as soon as the temperature drops back below the threshold value. In addition to operational security, the new generation provides an even longer service life; the automatic filter cleaning function blows dust particles out of the filter several times a day. Operators can also define a virtual operating period as the basis for a display of the time remaining until the next filter replacement is due, similar to the fuel gauge of a motor vehicle. This facilitates the planning of maintenance on demand, which saves further time and expense.
As far as the principal task of a fan-and-filter unit is concerned, namely maximum particle retention while at the same time allowing as much air as possible to pass, Rittal is setting new standards with its serial pleated filters. Thanks to the pleating, the surface area is six times larger, air throughput is increased by 40%, and maintenance intervals can be doubled or even tripled depending on the application. Together, these features of the new generation of Blue e+ fan-and-filter units raise this conventional form of enclosure climate control to a new level.
Founded in 1982, Rittal LLC is the fully owned US subsidiary of Rittal GmbH & Co. KG, and is headquartered in Schaumburg, IL. With a main production facility in Urbana, OH , a dedicated Modification Center in Houston, TX , and logistic hubs in Urbana, OH ; Springfield, OH ; Houston, TX ; Sparks, NV ; and Atlanta, GA , Rittal LLC is fully committed to providing the United States with quality enclosure solutions.
Founded in 1961 in Germany , Rittal is a global manufacturer of industrial and IT enclosures, racks, and accessories, including cooling solutions and power management systems for industrial, data center, outdoor, and hybrid applications. As the largest enclosure manufacturer in the world, Rittal provides quality solutions for practically any industrial or IT infrastructure application. Rittal is part of the owner-operated Friedhelm Loh Group along with Eplan.
SOURCE Rittal North America LLC
When converting stainless-steel enclosures to AX and KX, planners and users can now benefit from the Rittal system for special applications that...
Hvac Air Filters Rittal LLC, a leader in providing infrastructure solutions for IT applications, launches its new line of enclosures designed for the colocation...