Thank you for visiting nature.com. You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.
Scientific Reports volume 14, Article number: 8126 (2024 ) Cite this article ceiling hung curtain rod
In engineering, shafting systems are typically subjected to longitudinal vibration excitations, which may result in unwanted vibration. To study the control of longitudinal vibration in shafting systems, they can be simplified to rod structures. Currently, engineers have attempted to apply the nonlinear principle to design nonlinear supports to control the vibration of flexible structures. However, the flexible structures referenced in the literature are usually composed of a single component, which limits the application of nonlinear supports to more complex structures. To explore the potential application of nonlinear supports in marine engineering, this work introduces a longitudinal vibration prediction model for a double-rod system equipped with longitudinal nonlinear supports. The generalized Hamilton principle is used to derive the governing equations for the double-rod system with longitudinal nonlinear supports. The longitudinal vibration responses of the double-rod system are numerically solved using the Galerkin truncation method. The numerical results confirm that a 1-term truncation number guarantees the stability of the longitudinal vibration prediction model. Under certain conditions, the longitudinal vibration responses are significantly affected by longitudinal nonlinear supports. It is recommended to install longitudinal nonlinear supports on both Rod 1 and Rod 2 simultaneously to suppress vibration in the first two main resonance orders. With reasonable excitations, the vibration state and magnitudes of the double-rod system can be effectively controlled by adjusting the longitudinal nonlinear supports. Complex longitudinal vibration responses are more readily induced by altering the parameters of the longitudinal nonlinear support installed on Rod 1. Choosing appropriate parameters for the nonlinear supports on Rod 1 and Rod 2 positively contributes to the reduction of vibration in the double-rod system.
In various engineering fields, complex systems comprising basic engineering units—such as rods, beams, plates, shells, and others—are inevitably subject to vibration excitations caused by power machinery. In most cases, these excitations will induce external vibrations in complex systems. Unfortunately, prolonged exposure to strong vibration excitations can lead to several problems, including structural fatigue and fractures. Therefore, controlling vibrations in complex systems is vital to maintain their safety.
In marine engineering, shafting systems generally experience longitudinal vibration excitations introduced by the propeller, with excitation frequencies that correlate with the propeller’s rotational speed. Moreover, when analyzing the longitudinal vibration of shafting systems, they are often simplified to a system of multiple rods, while thrust bearings are represented as longitudinal support springs. Against this engineering background, understanding the longitudinal vibration characteristics of rod systems is critical for controlling vibrations in shafting systems. Numerous scholars have investigated the linear longitudinal vibration characteristics of rod systems, including rod mode shapes1, characteristic equations of rods2, analytical solutions for rods3, comparative studies of rod theories4, and rapid solution methods for rods5. With the advancement of nonlinear vibration theory, Cao and Tucker6 examined the nonlinear dynamics of elastic rods using Cosserat theory. Wang and Li7 developed a vibration model consisting of two rods and a clearance joint and discussed the model’s nonlinear dynamics. Andrianov et al.8 introduced a model of continuous rods with microstructure and investigated its nonlinear vibrations. Wang et al.9 studied the nonlinear vibration responses of a rod-fastening rotor based on the internal damping effect. Malara et al.10 considered the fractional derivative element and researched the nonlinear vibration of rods with variable cross-sections. Liang et al.11,12,13 developed the spectral element method, the transfer matrix method, and other robust approaches to systematically study complex vibrations in fluid-conveying pipes, contributing to the advancement of vibration prediction methods for elastic structures. With the increasing demand for nonlinear vibration control, scholars have attempted to utilize nonlinear principles to design various nonlinear supports14,15,16,17 Engineers then installed these supports into elastic structures to assess the feasibility of controlling vibrations using nonlinear supports. Santo et al.18 constructed a vibration prediction model for a vibrating rod with nonlinear springs and studied its multimodal behavior. Hao et al.19 designed a nonlinear vibration isolator and incorporated it into a flexible plate. They thoroughly investigated the isolator’s effectiveness in isolating the plate’s vibrations, advancing the application of nonlinear controls in flexible structures. Subsequently, many researchers focused on beam vibration control using nonlinear supports. Senalp et al.20 equipped a finite-length Euler–Bernoulli beam with linear and nonlinear foundations to examine its nonlinear dynamic responses. Ghayesh et al.21,22,23 considered supports exhibiting cubic stiffness characteristics and applied this type of nonlinear support at the internal boundaries of flexible beams. They explored the nonlinear vibrations, stability, and bifurcations of the system, facilitating the implementation of nonlinear stiffness in engineering. Wang and Fang24 analyzed the nonlinear vibrations of a flexible beam with nonlinear supports at both ends. Rodrigues et al.25 investigated the dynamic behavior of a beam on nonlinear elastic foundations. Mao et al.26 used the multiple scales method to study the nonlinear vibrations of flexible beams with nonlinear boundaries. Ding et al.27,28 introduced an adjustable nonlinear support design and implemented it in flexible and curved beams, proposing a novel approach to vibration control. Basta et al.29 utilized nonlinear energy sinks to create a metamaterial for a rotating cantilever beam and probed its nonlinear dynamics. Zhao et al.30,31,32 placed nonlinear supports in single and double-beam systems and systematically examined how the supports’ parameters affected the beams’ vibration responses. Han et al.33 applied the Lagrange method (LM) to assess the nonlinear dynamics of a beam with multiple nonlinear supports. The aforementioned studies primarily concentrate on the nonlinear vibration responses of flexible structures with nonlinear supports. However, these studies typically involve structures composed of a single element, which limits the application of nonlinear supports in more complex systems.
Considering marine engineering, the shaft systems suffer the axial force introduced by the propeller, which causes longitudinal vibration of the shafting systems, where such complex shafting systems are typically composed of several shaft segments. In analyzing the longitudinal vibration of some shafting systems, they can be simplified as the multiple-rod system connected through coupling elements. To explore the potential application of nonlinear supports in the vibration control of marine engineering, this work proposes a longitudinal vibration prediction model of a double-rod system with longitudinal nonlinear supports. Governing equations of the double-rod system with longitudinal nonlinear supports are derived by using the generalized Hamilton principle. Then, the double-rod system’s longitudinal vibration responses are numerically solved through the Galerkin truncation method (GTM). Based on the correct numerical results, longitudinal vibration responses of the double-rod system impacted by longitudinal nonlinear supports are studied.
In marine engineering, rod structures can be employed to simply shafting systems in analyzing their longitudinal vibration characteristics, where shafting systems are typically simplified as the vibration system consists of multiple rods, whereas thrust bearings in shafting systems are simplified to longitudinal support springs. For most occasions, shafting systems are generally subjected to longitudinal vibration excitations introduced by the propeller, where excitation frequencies of such vibration excitations are related to the rotation speed of the propeller. Generally, vibration excitation is acting on one component of the shafting system and transfer from couplers to other components of the system. Against this background, Fig. 1 gives the schematic diagram of a double-rod system with two longitudinal nonlinear supports. Rods of the system are marked as Rod 1 and Rod 2 to simplify the derivation, where u1(x1,t) and u2(x2,t) are the longitudinal vibration displacements of rods. Rods in the vibration system are connected through the linear coupling element, which is simplified as the coupling stiffness and coupling viscous damping. Longitudinal supporting springs are installed at the boundaries of the double-rod system. Various boundary conditions of the double-rod system can be simulated by changing the stiffness of the supporting springs.
The schematic diagram of a double-rod system with longitudinal nonlinear supports.
Longitudinal nonlinear supports are installed at Rod 1 and Rod 2, respectively. In this work, each nonlinear support presents the cubic stiffness character, where kN1 and kN2 are defined as their longitudinal nonlinear stiffness. xN1 and xN2 are the specific locations of longitudinal nonlinear supports at the double-rod system. Furthermore, the harmonic excitation is located at the left boundary of the double-rod system. Table 1 presents definitions of the parameters belonging to the vibration system.
This section derives governing equations of the double-rod system with longitudinal nonlinear supports. Before the derivation process, it is the basement to derive the energy form of the double-rod system with longitudinal nonlinear supports. Firstly, the kinetic energy of the double-rod system with longitudinal nonlinear supports is derived as,
TRod1 and TRod2 are the kinetic energy of Rod 1 and Rod 2. The potential energy of the double-rod system with longitudinal nonlinear supports is derived as,
VRod1 and VRod2 are the potential of Rod 1 and Rod 2. VBoundary1 and VBoundary2 are the potential energy of longitudinal supporting springs belonging to Rod 1 and Rod 2. VLE is the potential energy of the linear coupling element. VLN1 and VLN2 are the potential energy of longitudinal nonlinear supports.
Furthermore, the virtual work done by the coupling viscous damping and harmonic excitation is derived as,
δWLE is the virtual work done by the linear coupling element. δWE is the virtual work done by the harmonic excitation. The specific expressions of each term in Eqs. (1) to (3) are listed in Appendix A.
Then, employing the generalized Hamilton principle, namely,
On this basis, governing equations of the double-rod system with longitudinal nonlinear supports are derived by using the variational principle,
Equation (5a) is the vibration-governing equation of Rod 1 while Eq. (5b) is the vibration-governing equation of Rod 2. Meanwhile, boundary-governing equations of the double-rod system are derived as,
Equation (6a) is the boundary-governing equation of Rod 1 while Eq. (6b) is the boundary-governing equation of Rod 2. The specific derivation process of the double-rod system with longitudinal nonlinear supports related to Eq. (4) is listed in Appendix B.
Based on the governing equations derived in "Equations derivation" section longitudinal vibration responses of the double-rod system with longitudinal nonlinear supports can be obtained by solving its governing equations. In this work, the modal information of the double-rod system can be easily obtained. Considering the characteristics of GTM, the modal information of double-rod system provides the convenience for using the Galerkin truncation method to predict longitudinal dynamic behavior of a double-rod system with longitudinal nonlinear supports. Thus, this section concentrates on the solution procedure of the double-rod system with longitudinal nonlinear supports by using the Galerkin truncation method (GTM).
Before solving the governing equations derived in "Equations derivation" section it is necessary to expand the longitudinal vibration displacements of the double-rod system. In this work, the modal superposition method is applied to expand the above displacements, namely,
φ1n(x1) and φ2m(x2) are the mode functions of rods. q1n(t) and q2m(t) are the undetermined time coefficients. N and M are the max values of n and m. Substituting Eq. (7) into Eq. (5) and using the Galerkin condition, vibration-governing equations of rods are dispersed as,
The max value of i is N while that of j is M. Furthermore, ψ1i(x1) and ψ2j(x2) are the weight functions, meeting boundary-governing equations derived in "Equations derivation" section. In this work, the mode functions of each rod are selected as the weight functions. It can be easily observed that the solution procedure derived in this section is based on the modal information of rods, which is called the Galerkin truncation method. Then, longitudinal vibration responses of the double-rod system with longitudinal nonlinear supports are gained by applying numerical methods to solve Eqs. (8a) and (b). In this work, the Runge–Kutta method is chosen to solve the above equations.
The solution procedure derived in "Theoretical formulations" section is realized in the simulation platform MATLAB, where the ODE45 is employed to numerically solve the residual equations of the double-rod system with longitudinal nonlinear supports. Longitudinal vibration responses of the double-rod system with longitudinal nonlinear supports are numerically obtained. At first, the validation of longitudinal vibration responses calculated by the GTM is studied. Then, the impact of longitudinal nonlinear supports on the longitudinal vibration responses of the double-rod system is discussed. In the process of calculating, the calculation domain is chosen as 2000 periods of harmonic excitation. Longitudinal vibration responses in the last 200 calculation periods are regarded as stable numerical results. Structural parameters of the system are listed as follows, E1 = E2 = 6.89 × 1010 Pa, D1 = 0.06 m, D2 = 0.04 m, ρ1 = ρ2 = 2800 kg/m3, L1 = L2 = 0.5 m, kE = 104 N/m, CE = 2 Ns/m, FE = 100 N, and kL1 = kL2 = kR1 = kR2 = 5 × 104 N/m.
This section studies the validity of longitudinal vibration responses of the double-rod system with longitudinal nonlinear supports. In this numerical example, the parameters of nonlinear supports are chosen as kN1 = 108 N/m3 and kN2 = 108 N/m3. Observation location 1 is x1 = L1 while observation location 2 is x2 = 0. Figure 2 gives the longitudinal vibration responses under different truncation numbers. From Fig. 2, it can be observed that longitudinal vibration responses remain stable under 1-term, 2-term, 3-term, and 4-term truncation numbers. The above phenomenon indicates that 1-term truncation number can guarantee the stability of the longitudinal vibration responses of the double-rod system with nonlinear supports. Thus, in the subsequent study, the 1-term truncation number is set to calculate longitudinal vibration responses of the double-rod system in the subsequent study. Figure 3 gives the time history of the vibration responses belonging to the double-rod system under certain excitation frequencies. It can be seen from Fig. 3 that longitudinal vibration responses fully remain convergence in the last 200 calculation periods, illustrating the rationality of selecting calculation periods in this work.
Longitudinal vibration responses under different truncation numbers.
Time history of the longitudinal vibration responses under certain excitation frequencies.
Figure 4 gives longitudinal vibration responses gained by different methods, where the harmonic balance method (HBM) and Lagrange method (LM) are applied to verify the correctness of GTM in obtaining longitudinal vibration responses of the double-rod system. The detailed processes of LM and HBM are listed in Appendices C and D. Importantly, the solution process of LM is different from that of GTM. Meanwhile, the GTM calculates longitudinal dynamic behavior of the double-rod system with longitudinal nonlinear supports from the time domain while the HBM calculates those from the frequency domain. From Fig. 4, longitudinal vibration responses of the double-rod system with longitudinal nonlinear supports calculated by GTM fit smoothly with those gained by other methods. According to the above analysis, the correctness of GTM in calculating longitudinal vibration responses of the double-rod system with longitudinal nonlinear supports is verified.
Longitudinal vibration responses gained by different methods.
This work mainly concentrates on the longitudinal dynamic behavior of the double-rod system influenced by longitudinal nonlinear supports. In this section, the influence of parameters belonging to nonlinear supports mainly are systemically studied.
Figure 5 gives the impact of kN1 on longitudinal frequency responses. In this numerical example, the longitudinal nonlinear support only installs on Rod 1. From Fig. 5, the parameter variation of longitudinal nonlinear support which is installed on Rod 1 impacts longitudinal vibration responses greatly for the 1st main resonance area. In contrast, the variation of kN1 rarely impacts longitudinal vibration responses at the 2nd main resonance area. With the growth of kN1, the 1st main resonance area gradually shifts to a higher frequency area. Meanwhile, the existence of longitudinal nonlinear support suppresses the vibration level of the 1st main resonance area for both rods. The magnitude jumping phenomenon can be observed due to the existence of kN1. The reason for the above phenomenon is that vibration magnitudes of the double-rod system at resonance areas stay in a significant level. According to the vibration theory, as the excitation frequency runs away from the resonance areas of the double-rod system, vibration magnitude of double-rod system decreases sharply. Due to the existence of supporting nonlinear stiffness, magnitude-frequency response curves are no longer symmetric. Thus, magnitude jumping phenomenon can be clearly observed. In addition, the 1/3 sub-harmonic resonance is motivated due to the existence of longitudinal nonlinear support installed in Rod 1, where the fundamental natural frequency of Rod 1 is 25.3 Hz. From the aspect of vibration states, under kN1 = 3 × 109 N/m3 and kN1 = 4 × 109 N/m3, longitudinal vibration responses present multiple continuous amplitudes. It should be noticed that the vibration state of longitudinal vibration responses that have multiple continuous amplitudes is different from other longitudinal vibration responses. According to the above phenomenon, the longitudinal nonlinear support that is installed on Rod 1 converts the vibration state of the double-rod system under certain values of kN1.
The impact of kN1 on longitudinal frequency responses.
To study the vibration state of complex longitudinal vibration responses, Fig. 6 gives the phase trajectory and Poincaré points of complex longitudinal vibration responses. In plotting Poincaré points, a constant phase t0 is selected as the initial phase while external excitation period (t = t0, t = t0 + TE, t = t0 + 2TE …) is selected as the variation period to plot steady-state response points in phase diagrams. The steady-state response points gained through the above process are exactly Poincaré points. Furthermore, v1 and v2 are defined as the velocity of Rod 1 and Rod 2, respectively. From each subfigure in Fig. 6, the phase trajectory remains stable and Poincaré points form an entire closed curve. It can be concluded that complex longitudinal vibration responses that appeared in Fig. 5 stay in the quasi-periodic vibration state.
Phase trajectory and Poincaré points of complex longitudinal vibration responses.
Then, to study the potential reason of complex longitudinal vibration responses appearing in Figs. 5 and 7 gives magnitudes of nonlinear force with the change of kN1. From Fig. 7, with the growth of kN1, max values at the 1st main resonance area of the nonlinear force gradually increase. When kN1 increases at a certain value, complex longitudinal vibration responses are also shown in Fig. 7, where the frequency range of complex longitudinal vibration in Fig. 7 perfectly matches those in Fig. 5. Furthermore, it should be noted that the magnitude of nonlinear force jumps at certain frequencies. The above jumping frequencies fit the jumping frequencies in Fig. 5. It can be observed that complex longitudinal vibration responses in Figs. 5 and 7 synchronous occur. The reason for the above phenomenon is that vibration magnitudes of the double-rod system at resonance areas stay in a significant level. Considering the form of nonlinear stiffness acting on internal supports, magnitudes of the nonlinear restoring force is proportion to the displacement of double-rod system. Thus, the nonlinear restoring force acting on the double-rod system stay in a high level under resonance areas. As the excitation frequency runs away from the resonance areas of the double-rod system, vibration magnitude of double-rod system decreases sharply, causing the decrease of nonlinear restoring force. Meanwhile, due to the existence of supporting nonlinear stiffness, magnitude-frequency response curves are no longer symmetric. Thus, magnitude jumping phenomenon can be clearly observed in Fig. 7. Furthermore, the nonlinear support located at Rod 1 only introduces the nonlinear force to the double-rod system. It can be concluded that the growth of nonlinear force is the reason for the occurrence of complex longitudinal vibration responses in Fig. 5.
Magnitudes of nonlinear force with the change of kN1.
Figure 8 gives the impact of kN2 on longitudinal frequency responses. In this numerical example, the longitudinal nonlinear support only installs on Rod 2. According to Fig. 8, the parameter variation of longitudinal nonlinear support which is installed on Rod 2 impacts longitudinal vibration responses greatly for Rod 2. Unfortunately, the variation of kN2 rarely impacts longitudinal vibration responses for Rod 1. With the growth of kN2, the 2nd main resonance area gradually shifts to a higher frequency area. The existence of longitudinal nonlinear support suppresses the vibration level of Rod 2. Due to the existence of kN2, the magnitude jumping phenomenon appears at the 2nd main resonance of Rod 2.
The impact of kN2 on longitudinal frequency responses.
Compressively consider Figs. 5 and 8, it can be found that the longitudinal nonlinear support installed on Rod 1 has a positive impact on vibration reduction for the 1st main resonance area. Meanwhile, the longitudinal nonlinear support installed on Rod 2 positively impacts the vibration reduction of Rod 2. The above phenomenon suggests that the simultaneous installation of longitudinal nonlinear supports on Rod 1 and Rod 2 can effectively reduce the vibration magnitudes of the double-rod system. Therefore, it is of significance to reduce the longitudinal vibration by simultaneously employing longitudinal nonlinear supports.
Against this background, Fig. 9 gives the max values of longitudinal frequency responses under the change of kN1 and kN2. From Fig. 9, when kN1 and kN2 remain at a low level, the impact of longitudinal nonlinear supports on the double-rod system is unobvious. However, changing parameters of longitudinal nonlinear support significantly impacts the max values of frequency response belonging to the double-rod system when the nonlinear stiffness exceeds certain values. The explanation for the above phenomenon is that the magnitudes of nonlinear force are positively correlation with the nonlinear stiffness. Therefore, the nonlinear force stays at a low level under low nonlinear stiffness, causing a limited impact on the maximum values of longitudinal frequency responses belonging to the double-rod system. Furthermore, a reasonable selection of nonlinear stiffness can effectively reduce the vibration of the double-rod system observation location 1 and observation location 2 at the same time.
Max values of longitudinal frequency responses under the change of kN1 and kN2.
On many engineering occasions, the rod system is subjected to excitation caused by power machinery. The power machinery typically works in a determined condition to protect its safety. Against this situation, excitations acting on the rod system present the single-frequency character.
Figure 10 gives the impact of kN1 on longitudinal vibration responses under determined excitations. For this work, the fundamental natural frequency of Rod 1 is 25.3 Hz while that of Rod 2 is 37.9 Hz. According to the analysis in "Longitudinal frequency responses impacted by longitudinal nonlinear supports" section, for the double-rod system with longitudinal nonlinear supports, 23 Hz is out of the 1st resonance area of double-rod system while 33 Hz is close to the 1st resonance of the double-rod system. To roundly study longitudinal responses of the double-rod system under a single-frequency excitation, excitation frequencies in and out of the resonance areas should be considered. Thus, in this numerical example, frequencies of the harmonic excitation are selected as 23 Hz and 33 Hz. It should be noticed that 23 Hz is out of the 1st main resonance area of the double rod system while 33 Hz is in the 1st main resonance area. From Fig. 10, the change of kN1 effectively impacts longitudinal vibration responses of the double-rod system under determined excitations. From the aspect of vibration control, the growth of kN1 is good for reducing the vibration of the double-rod system under 23 Hz. kN1 staying at a low level is beneficial for the vibration reduction of the double-rod system under 33 Hz. From the aspect of vibration states, the vibration state of the double-rod system always stays in the single-periodic state when the excitation frequency is 23 Hz. However, complex longitudinal vibration responses of the double-rod system appear when the excitation frequency is 33 Hz. With the growth of kN1, such complex longitudinal vibration responses first appear and then vanish. The reason for the above phenomenon is explained in the following. According to the analysis related to Fig. 5, the growth of kN1 shifts the 1st main resonance area from a low-frequency area to a high-frequency area. Therefore, with the growth of kN1, the 1st main resonance area crosses 33 Hz. When the main resonance area contains 33 Hz, the magnitude of longitudinal vibration responses rises sharply, resulting in the increase of the nonlinear force acting on the double-rod system. With the continuous growth of kN1, the 1st main resonance area is gradually far away from 33 Hz. In the above process, the magnitude of longitudinal vibration responses gradually decreases, resulting in the decrease of the nonlinear force acting on the double-rod system. Due to the variation of nonlinear force, complex longitudinal vibration responses first appear and then vanish.
Longitudinal vibration responses under determined excitations impacted by kN1.
Then, Fig. 11 gives the phase trajectory and Poincaré points of complex longitudinal vibration responses to study their vibration states. From each subfigure in Fig. 11, the phase trajectory remains stable and Poincaré points form an entire closed curve, suggesting that complex longitudinal vibration responses that appeared in Fig. 10 remain in the quasi-periodic vibration state.
Phase trajectory and Poincaré points of the complex longitudinal vibration responses.
Figure 12 gives the impact of kN2 on longitudinal vibration responses under determined excitations, where excitation frequencies of the harmonic excitation are also selected as 23 Hz and 33 Hz. From Fig. 12, it can be observed that longitudinal vibration responses of Rod 2 under determined excitations are effectively impacted by the change of kN2. The growth of kN2 has a positive impact on the vibration reduction of Rod 2. In contrast, longitudinal vibration responses of Rod 1 under determined excitations are rarely impacted by the change of kN2, suggesting that it is unwise to control the vibration of Rod 1 by employing kN2.
Longitudinal vibration responses under determined excitations impacted by kN2.
Compared the analysis related to Fig. 11 with that related to 12, the impact of kN1 and kN2 on the longitudinal vibration responses belonging to the double-rod system is different from each other. Meanwhile, under the excitation frequency located at the 1st main resonance area, longitudinal vibration responses of the double-rod system are more obviously impacted by the change of kN1 and kN2. Therefore, it is necessary to study the impact of synchronous change kN1 and kN2 on the longitudinal vibration responses of the double-rod system under the excitation frequency located at the main resonance area.
Figure 13 studies the impact of kN1 and kN2 on the longitudinal vibration responses of the double-rod system in detail. According to Fig. 13, the impact of kN1 on the longitudinal vibration responses of the double-rod system has the jumping values. Namely, when kN1 increases to a certain value, peaks of longitudinal vibration responses increase rapidly. Then, the continuous growth of kN1 can gradually reduce peaks of the double-rod system. At the same time, it can be found that changing kN2 also impacts longitudinal vibration responses of the double-rod system when kN1 exceeds 1010 N/m3. Furthermore, a reasonable selection of kN1 and kN2 is positive for the vibration reduction of the double-rod system.
Max values of longitudinal vibration responses with the change of kN1 and kN2.
This work introduces a longitudinal vibration prediction model for a double-rod system equipped with longitudinal nonlinear supports, with the supports installed on each sub-rod. We solve the longitudinal vibration responses of the double-rod system using the GTM. We discuss in detail the influence of longitudinal nonlinear supports, installed on each sub-rod, on the double-rod system’s vibration responses. Moreover, we explain the causes behind complex longitudinal vibration responses. The conclusions of this work are summarized as follows,
We propose and validate a longitudinal vibration prediction model for a double-rod system with longitudinal nonlinear supports. For the parameters selected in this study, a 1-term truncation number ensures the stability of the prediction model.
Longitudinal nonlinear supports on each sub-rod significantly affect the double-rod system’s vibration responses. Adjusting the parameters of these supports alters the vibration state and magnitude. Installing longitudinal nonlinear supports on both Rod 1 and Rod 2 effectively reduces vibration.
Complex longitudinal vibration responses are more readily induced by altering the parameters of the longitudinal nonlinear support on Rod 1. Careful selection of parameters for the supports on both Rod 1 and Rod 2 is beneficial for reducing vibrations in the double-rod system.
Overall, this study systematically explores the impact of nonlinear supports on the longitudinal vibration control of the double-rod system, enhancing the potential for applying nonlinear supports to control shafting system vibrations in marine engineering.
Candan, S. & Elishakoff, I. Constructing the axial stiffness of longitudinally vibrating rod from fundamental mode shape. Int. J. Solids Struct. 38, 3443–3452 (2001).
Erol, H. Characteristic equations of longitudinally vibrating rods carrying a tip mass and several viscously damped spring–mass systems in-span. Proc. Inst. Mech. Eng. C J. Mech. Eng. Sci. 218(10), 1103–1114 (2004).
Davey, K. & Rasgado, M. T. A. Analytical solutions for vibrating fractal composite rods and beams. Appl. Math. Modell. 35(3), 1194–1209 (2011).
Mei, C. Comparison of the four rod theories of longitudinally vibrating rods. J. Vib. Control 21(8), 1639–1656 (2013).
Xu, D., Du, J. & Liu, Z. Longitudinal vibration analysis of nonlocal nanorods with elastic end restraints by an improved Fourier series method. Noise Control Eng. J. 64, 766–778 (2016).
Cao, D. Q. & Tucker, R. W. Nonlinear dynamics of elastic rods using the Cosserat theory: Modelling and simulation. Int. J. Solids Struct. 45, 460–477 (2008).
Wang, Y. & Li, F. M. Nonlinear dynamics modeling and analysis of two rods connected by a joint with clearance. Appl. Math. Modell. 39(9), 2518–2527 (2015).
Andrianov, I. V., Danishevskyy, V. V. & Markert, B. Nonlinear vibrations and mode interactions for a continuous rod with microstructure. J. Sound Vib. 351, 268–281 (2015).
Wang, L. et al. Nonlinear dynamic response and stability of a rod fastening rotor with internal damping effect. Arch. Appl. Mech. 91, 3851–3867 (2021).
Malara, G., Pomaro, B. & Spanos, P. D. Nonlinear stochastic vibration of a variable cross-section rod with a fractional derivative element. Int. J. Non-Linear Mech. 135, 103770 (2021).
Liang, F., Chen, Y., Gong, J. J. & Qian, Y. Vibration self-suppression of spinning fluid-conveying pipes composed of periodic composites. Int. J. Mech. Sci. 220(15), 107150 (2022).
Liang, F., Xu, W. H. & Chen, Z. Q. Flexural-torsional vibration reduction of an eccentric phononic crystal pipe conveying fluid. J. Fluids Struct. 120, 103904 (2023).
Liang, F., Chen, Y., Kou, H. & Qian, Y. Hybrid Bragg-locally resonant bandgap behaviors of a new class of motional two-dimensional meta-structure. Eur. J. Mech. A. Solids 97, 104832 (2023).
Article ADS MathSciNet Google Scholar
Ibrahim, R. A. Recent advances in nonlinear passive vibration isolators. J. Sound Vib. 314, 371–452 (2008).
Liu, C., Jing, X., Daley, S. & Li, F. Recent advances in micro-vibration isolation. Mech. Syst. Signal Process. 56–57, 55–80 (2015).
Lu, Z. & Chen, L. Some recent progresses in nonlinear passive isolations of vibrations. Chin. J. Theor. Appl. Mech. 49(3), 550–564 (2017).
Younesian, D., Hosseinkhani, A., Askari, H. & Esmailzadeh, E. Elastic and viscoelastic foundations: A review on linear and nonlinear vibration modeling and applications. Nonlinear Dyn. 97, 853–895 (2019).
Santo, D. R., Mencik, J. M. & Goncalves, P. J. P. On the multi-mode behavior of vibrating rods attached to nonlinear springs. Nonlinear Dyn. 100, 2187–2203 (2020).
Hao, R. B., Lu, Z. Q., Ding, H. & Chen, L. Q. A nonlinear vibration isolator supported on a flexible plate: Analysis and experiment. Nonlinear Dyn. 108, 941–958 (2022).
Senalp, A. D., Arikoglu, A., Ozkol, I. & Dogan, V. Z. Dynamic response of a finite length Euler-Bernoulli beam on linear and nonlinear viscoelastic foundations to a concentrated moving force. J. Mech. Sci. Technol. 24(10), 1957–1961 (2010).
Ghayesh, M. H., Kazemirad, S. & Darabi, M. A. A general solution procedure for vibrations of systems with cubic nonlinearities and nonlinear/time-dependent internal boundary conditions. J. Sound Vib. 330, 5382–5400 (2011).
Ghayesh, M. H., Kazemirad, S. & Reid, T. Nonlinear vibrations and stability of parametrically exited systems with cubic nonlinearities and internal boundary conditions: A general solution procedure. Appl. Math. Model. 36, 3299–3311 (2012).
Ghayesh, M. H. Stability and bifurcations of an axially moving beam with an intermediate spring support. Nonlinear Dyn. 69, 193–210 (2012).
Wang, Y. R. & Fang, Z. W. Vibrations in an elastic beam with nonlinear supports at both ends. J. Appl. Mech. Tech. Phys. 56(2), 337–346 (2015).
Article ADS MathSciNet Google Scholar
Rodrigues, C., Simoes, F. M. F., Costa, A. P. D. & Rizzi, D. F. E. Finite element dynamic analysis of beams on nonlinear elastic foundations under a moving oscillator. Eur. J. Mech. A Solids 68, 9–24 (2018).
Mao, X. Y., Ding, H. & Chen, L. Q. Vibration of flexible structures under nonlinear boundary conditions. ASME J. Appl. Mech. 84(11), 111006 (2017).
Ding, H., Lu, Z. Q. & Chen, L. Q. Nonlinear isolation of transverse vibration of pre-pressure beams. J. Sound Vib. 442(3), 738–751 (2019).
Ding, H. & Chen, L. Q. Nonlinear vibration of a slightly curved beam with quasi-zero-stiffness isolators. Nonlinear Dyn. 95, 2367–2382 (2019).
Basta, E., Ghommem, M. & Emam, S. Vibration suppression of nonlinear rotating metamaterial beams. Nonlinear Dyn. 101, 311–332 (2020).
Zhao, Y. & Du, J. Dynamic behavior analysis of an axially loaded beam supported by a nonlinear spring-mass system. Int. J. Struct. Stab. Dyn. 21(11), 2150152 (2021).
Zhao, Y., Hu, X., Du, J., Liu, Y. & He, F. Transverse forced nonlinear vibration analysis of a double-beam system with a supporting nonlinearity. J. Vib. Control https://doi.org/10.1177/10775463221144359 (2022).
Zhao, Y., Du, J., Chen, Y. & Liu, Y. Dynamic behavior analysis of the axially loaded beam with the nonlinear support and elastic boundary constraints. Chin. J. Theor. Appl. Mech. 54(9), 2529–2542 (2022).
Han, B., Jia, X., Wang, M. & Fan, M. Transverse dynamic responses and optimization of a flexibly constrained beam with multiple nonlinear supports that present cubic stiffness. Int. J. Struct. Stab. Dyn. https://doi.org/10.1142/S0219455424500135 (2023).
This work is supported by the Fund of Natural Science Special (Special Post) Research Foundation of Guizhou University [Grant No. 2023-060].
Key Laboratory of Advanced Manufacturing Technology of the Ministry of Education, Guizhou University, Guiyang, 550025, People’s Republic of China
Wuhan Second Ship Design and Research Institute, Wuhan, 430064, People’s Republic of China
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
Y.Z. and H.C. wrote the main manuscript text and Y.Z. prepared all figures. All authors reviewed the manuscript.
The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper. The authors declare no conflict of interest in preparing this article. The datasets generated during and/or analyzed during the current study are available from the corresponding author upon reasonable request.
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
Zhao, Y., Cui, H. A study of analyzing longitudinal dynamic behavior of a double-rod system with longitudinal nonlinear supports. Sci Rep 14, 8126 (2024). https://doi.org/10.1038/s41598-024-58986-9
DOI: https://doi.org/10.1038/s41598-024-58986-9
Anyone you share the following link with will be able to read this content:
Sorry, a shareable link is not currently available for this article.
Provided by the Springer Nature SharedIt content-sharing initiative
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.
Scientific Reports (Sci Rep) ISSN 2045-2322 (online)
short curtain pole Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.