Safety+Health advertisers offer products and services to help you avoid citations related to OSHA’s Top 10 most cited standards.
Washington — Workers who frequently drill concrete can experience reduced exposure to noise, silica dust and vibration if pneumatic rock drills are replaced with electric rotary hammer drills, according to researchers at the University of California, Berkeley. Submerged Pump
For the study, the researchers used a test bench robotic system to measure silica dust, handle vibration and noise from both types of drills, as well as productivity.
Results showed that silica dust generated by the pneumatic rock drill was at least 444 times greater than OSHA’s permissible exposure limit of 50 micrograms per cubic meter of air over an 8-hour time-weighted average, whereas with the electric drill, silica dust was 11 times greater than the PEL.
In terms of vibration, the pneumatic drill had levels that were about five times higher than the electric drill. Regarding noise, the mean level for the electric drill was a time-weighted average of 102 decibels with a peak of 117.7 dB, compared with 116.2 dBA and a peak of 130.4 dB, respectively, for the pneumatic drill.
Both drills were similarly effective, which was measured by using each to drill three 100 mm holes into cured concrete block.
The study was published online Aug. 13 in the journal Applied Ergonomics.
Safety+Health welcomes comments that promote respectful dialogue. Please stay on topic. Comments that contain personal attacks, profanity or abusive language – or those aggressively promoting products or services – will be removed. We reserve the right to determine which comments violate our comment policy. (Anonymous comments are welcome; merely skip the “name” field in the comment box. An email address is required but will not be included with your comment.)
Take a quiz about this issue of the magazine and earn recertification points from the Board of Certified Safety Professionals.
Read what other people are saying and post your own comment.
Scaling AED Programs: Remote Monitoring Enhances Efficiencies at Lower Costs
Packaging Supplier Streamlines EHS Solution — One Platform, Many Solutions
Safety+Health magazine, published by the National Safety Council, offers comprehensive national coverage of occupational safety news and analysis of industry trends to more than 91,000 subscribers.
Vertical Submerged Pump Save lives, from the workplace to anyplace. The National Safety Council is America’s leading nonprofit safety advocate. We focus on eliminating the leading causes of preventable injuries and deaths.