The U.S.-made Powersave systems provide lithium iron phosphate back-up power that can be integrated with renewable energy sources.
Lion Energy, a U.S. manufacturer of energy storage systems based in American Fork, Utah, launched its Powersave Energy Storage Solutions (ESS), including cabinet and container systems designed to provide businesses with back-up power, enable energy time shifting, renewable energy integration, load management and power system recovery. Portable Solar Panel Setup
The Powersave solutions use lithium iron phosphate (LFP) battery storage technology, also known as LiFePO4, which is considered safer than standard lithium ion as LFP chemistry minimizes thermal runaway fire risks. Furthermore, as described by David Bly, iron doesn’t burn like manganese, and on the rare occasion when a fire does occur (due to battery failure) they are limited to wires, and sometimes battery management system (BMS) printed circuit boards. Lion Energy said its team designed the batteries to be scalable, fireproof and resistant to corrosion.
“Assuming that the battery casing conforms to NEMA or IP standards, cell fires cannot escape the case unless it’s been punctured,” Bly said.
The Cabinet Series for indoor and outdoor commercial and industrial (C&I) energy storage systems can help reduce peak energy costs from equipment and operations, the company reports. Its power and capacity ranges from 30kW/50kWh to 90kW/180kWh. Model PS2 offers a cycle life of 6,000 based on 80% depth of discharge. The cabinet solution is 94.5 inches by 63 inches by 88.5 inches and weighs 7,070 pounds. Supported communication protocols include RS485, CAN, Ethernet, DNP3, Modbus TCP/IP.
The Container Series, which comes in two models, is an outdoor containerized energy storage system for utility grid tie or C&I behind-the-meter applications. The systems are configured to meet each customer’s specific power (kW) and capacity storage (kWh) requirements from 675 kw/1032 to 1.7 MW / 3.44 MWh per container. The PS20 model’s power ranges from 430 kW to 675 kW and capacity ranges from 1,032 kWh to 2,064 kWh. It measures 238.5 inches by 96 inches by 114 inches and weighs 47,000 pounds.
The PS30 model’s power ranges from 675 kW to 1.7 MW and capacity from 2.064 MWh-3.440 MWh. It is the same size as the PS20 model but weighs 67,000 pounds.
Both the Powersave Cabinet and Container Series are custom solutions where multiple units can be combined for increased capacity applications. Click here for more information.
This content is protected by copyright and may not be reused. If you want to cooperate with us and would like to reuse some of our content, please contact: editors@pv-magazine.com.
More articles from Anne Fischer
Please be mindful of our community standards.
Your email address will not be published. Required fields are marked *
Save my name, email, and website in this browser for the next time I comment.
Notify me of follow-up comments by email.
Notify me of new posts by email.
By submitting this form you agree to pv magazine using your data for the purposes of publishing your comment.
Your personal data will only be disclosed or otherwise transmitted to third parties for the purposes of spam filtering or if this is necessary for technical maintenance of the website. Any other transfer to third parties will not take place unless this is justified on the basis of applicable data protection regulations or if pv magazine is legally obliged to do so.
You may revoke this consent at any time with effect for the future, in which case your personal data will be deleted immediately. Otherwise, your data will be deleted if pv magazine has processed your request or the purpose of data storage is fulfilled.
Further information on data privacy can be found in our Data Protection Policy.
pv magazine USA offers daily updates of the latest photovoltaics news. We also offer comprehensive global coverage of the most important solar markets worldwide. Select one or more editions for targeted, up to date information delivered straight to your inbox.
Legal Notice Terms and Conditions Privacy Policy © pv magazine 2024
Welcome to pv magazine USA. This site uses cookies. Read our policy. ×
Solar Panel Installation The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.