Thank you for visiting nature.com. You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.
Scientific Reports volume 12, Article number: 22259 (2022 ) Cite this article Fmoc-D-Phe-OH
In this study, we prepared antibacterial hydrogels through the self-assembly of naphthyl anthranilamide (NaA) capped amino acid based cationic peptide mimics. These ultra-short cationic peptide mimics were rationally designed with NaA as a capping group, l -phenylalanine, a short aliphatic linker, and a cationic group. The synthesized peptide mimics efficiently formed hydrogels with minimum gel concentrations between 0.1 and 0.3%w/v. The resulting hydrogels exhibited desirable viscoelastic properties which can be tuned by varying the cationic group, electronegative substituent, or counter anion. Importantly, nanofibers from the NaA-capped cationic hydrogels were found to be the source of hydrogels’ potent bacteriacidal actvity against both Gram-positive and Gram-negative bacteria while remaining non-cytotoxic. These intrinsically antibacterial hydrogels are ideal candidates for further development in applications where bacterial contamination is problematic.
The self-assembly of low molecular weight gelators (LMWGs), into supramolecular hydrogels is an attractive method to generate biocompatible materials. LMWGs based on short peptides or peptidomimetics, that consist of less than six amino acid (AA) sequences, have gained a lot of attention due to their tunable supramolecular properties, potential biocompatibility, and cost-effective synthesis when compared to natural peptides1,2,3,4. This class of LMWGs were reported to form supramolecular hydrogels via non-covalent interactions such as combination of H-bonding, π–π stacking, and hydrophobic interactions5. The N-terminus of peptides based LMWGs are often modified by incorporating a non-proteinaceous aromatic groups as a capping group, which can enhance the π–π stacking capability and drive the self-assembly process leading to hydrogel formation1. Apart from the most widely used capping group, fluorenylmethoxycarbonyl (Fmoc), various other aromatic group including naphthalene6,7, indole8, benzimidazole9, pentafluorobenzene10, pyrene11, and others12 have been reported to induce hydrogelation.
Antibacterial hydrogels based on short-peptides have been reported13. The majority of examples require encapsulation of another active agent (e.g. antibiotics, silver ion, or salicylic acid) in order to achieve their antibacterial efficacy14,15,16,17,18,19,20,21. The need for encapsulation of active agents can lead to problems associated with antimicrobial resistance, loading capacity, release rate, and biodegradability. Hence, hydrogels with inherent antibacterial properties are highly desirable for clinical use.
Limited examples of short peptide-based hydrogels with inherent antibacterial properties have been reported in literature. For instance, Fmoc-diphenylalanine and Fmoc-capped short peptides bearing either lysine-rich or pyridinium groups have been found with moderate antibacterial activities against Gram-positive and Gram-negative bacteria22,23. In addition, naphthalene-capped tetrapeptides displayed significant activity against S. epidermis and E. coli biofilm24.
Recently, we have demonstrated that anthranilamide-based diphenylalanine peptide mimics formed self-assembled hydrogels with promising antibacterial activity against S. aureus25. Unlike Fmoc-based LMWGs, the anthranilamide-based peptide mimics have diverse chemical modifications that can be introduced to the scaffold, such as hydrophobic groups, substitutions on aromatic caps, and varying chain lengths, cationic/anionic charges etc. This base scaffold provides a versatile platform for the systematic examination of the effects of different chemical moieties on intramolecular interactions, that induce self-assembly and gel formation, and on biological functions such as antimicrobial activity.
In this work, we present the hydrogel formation of a library of naphthyl anthranilamide (NaA) capped amino acid-based cationic peptide mimics. These ultra-short cationic peptide mimics composed of a NaA capping group, l -phenylalanine, a short aliphatic linker, and a cationic group (Fig. 1). These peptide mimics could be facilely synthesized on a gram scale via ring-opening reaction of isatoic anhydride in solution phase25,26, rather than using solid phase peptide synthesis (SPPS). As an effort to reduce the toxicity of the previously reported anthranilamide-based hydrogels, the design of current hydrogelators involves only one unit of phenylalanine. Apart from providing π–π stacking interaction, the aromatic side chain of phenylalanine also increases the overall hydrophobicity of the gelators.
General structure of naphthyl anthranilamide (NaA)-capped ultra-short hydrogelators.
Cationic charge was also introduced by incorporating either ammonium or guanidinium groups, which are attached through a short aliphatic linker, on the C-terminus of phenylalanine. The presence of cationic charge was also envisaged to aid the solubility of the resulting hydrogelators. Moreover, the cationic groups employed, have been reported to be responsible for antibacterial activity of AMPs and their mimics27,28,29. The antibacterial efficacy of the cationic hydrogels was evaluated in vitro against S. aureus and E. coli.
The structural, morphological, and mechanical properties of the cationic hydrogels were investigated using various techniques, namely 1H NMR, circular dichroism (CD) spectroscopy, attenuated total reflectance infrared (ATR-FTIR), atomic force microscopy (AFM), and rheometer. The cytotoxicity was examined on HEK293T cells.
The NaA-capped cationic hydrogelators reported herein were systematically designed and synthesized with four modifications (Fig. 2), such as varying the linker length (Modification A), altering the cationic moiety (Modification B), introducing halogen (i.e. fluoro, chloro, and bromo) substituent (Modification C), and changing the counter anion (Modification D). The effect of each modification to the hydrogelation capability, mechanical properties, and antibacterial activity of the resulting hydrogels were evaluated.
Hydrogelators 1–10 derived from NaA-capped cationic peptide mimics.
As describe in Scheme S1, these peptide mimics were synthesized in excellent yields (60–78%).The NaA-capped cationic peptide mimics were synthesized on a gram scale via ring-opening reaction of isatoic anhydride derivatives using l -phenylalanine followed by amide coupling reaction to introduce the naphthyl moiety25,26. The cationic charge within these peptide mimics were introduced by either adding 1.5 equivalent of either glucono-∂-lactone (GdL), during the hydrogel formation, or treating the intermediate 3a with dilute acids (TFA or HCl).
The majority of the cationic peptide mimics formed hydrogels at physiological pH using a combination of physical and chemical triggers which could alter their thermodynamic equilibrium. Addition of GdL (1.5 equivalent) to compound 1a–8a (Fig. 3) and mild heating are required to generate the ammonium group, present in hydrogels 1–8. The presence of cationic group would lead to dissolution of these compounds in water (Scheme S2). Meanwhile, the cationic peptide mimics 9a and 10a (Fig. 3), bearing TFA− and Cl− as counter anion, were readily soluble in water after mild heating was applied to form hydrogels 9 and 10. All solutions turned clear upon heating, indicating complete disolution. Upon cooling to room temperature, the solutions became viscous within 3 h (Fig. S1).
Structure of peptide mimic hydrogelators used for hydrogelation studies.
To form self-supporting hydrogels, the addition of NaCl (5.0 equivalent) was attempted. The majority of viscous solutions of the cationic peptide mimics became solid-like hydrogels after addition of NaCl as observed through vial inversion test. Self-supporting characteristic of hydrogels were observed from peptide mimics 2a, 3a, 4a, 6a, 7a, 9a, and 10a. In contrast, syneresis, a phenomenon where water was expelled followed by structural disintegration30,31,32, was observed for hydrogels 1, 5 and 8, made from corresponding peptide mimics 1a (bearing 2 linkers), 5a (bromo), and 8a (guanidinium) respectively.
These observations suggested that chemical modification of these peptide mimics affected their hydrogel formation capability. Although reported to increase the antibacterial activity of several peptide mimics26,33, the presence hydrophobic bromo substituent might interfere with the π–π stacking interaction of the aromatic group5. In addition, the choice of cationic group significantly influenced the balance between hydrophobicity and hydrophilicity of the overall molecules. Changing the cationic group from primary ammonium in hydrogel 2 (Log P = 2.7) to guanidinium in hydrogel 8 (Log P = 1.7) significantly increased the hydrophilicity of the peptide mimics, which may explain their unstable characteristics observed in vial inversion test. Due to their poor structural stability, further characterization of hydrogel 1, 5, and 8 was not carried out.
The minimum gel concentration (MGC), the minimum concentration of peptide mimics required to form a self-supporting hydrogel, was qualitatively determined by varying the concentration of peptide mimics 2a–4a, 6a, 7a, 9a, and 10a in a vial inversion test34,35,36. These peptide mimics were found to form self-supporting hydrogels at low concentrations, with MGC ranging from 0.1 to 0.3%(w/v) (Table 1). Additionally, their MGC did not seem to be affected by chemical modifications.
In agreement with the visual observation obtained from vial inversion test, 1H NMR spectra also indicated that self-assembly had occurred before the addition of NaCl. The 1H NMR of peptide mimic 2a as a model compound, disolved in DMSO with GDL without heating (monomeric phase), exhibited well-resolved NMR features (Fig. 4, red). Conversely, at the same concentration (0.3%(w/v)) the 1H NMR recorded from viscous solution in water showed notably broader peaks (Fig. 4, blue), indicating self-assembly had occured. Aggregates, including fibrils, frequently exhibit broadening of spectral features due to slower tumbling rates on the NMR time-scale37.
1H NMR spectra of NaA-capped cationic peptide mimics 2a in their monomer, viscous solution (VS), and gel state (hydrogel 2).
In addition, the NaA capping group was involved in the self-assembly of these cationic peptide mimics. Upon increasing the concentration from 0.1 to 0.3 %(w/v), an up-field chemical shift (Δδ = 0.06 ppm) of peaks that correspond to the aryl protons of the aromatic-capping group was observed. This indicates their participation in stacking interactions which drive the self-assembly (Fig. 4, green and blue)25,38,39,40.
Addition of NaCl was crucial to drive the equilibrium towards the self-assembled state, leading to self-supporting hydrogel formation. The 1H NMR spectrum of hydrogel 2 at 0.3%(w/v) with the addition of NaCl, showed extreme broadening and loss of 1H NMR features that indicated complete transformation to their gel phase (Fig. 4, purple)39. At low ionic strength, the electrostatic repulsion between the charged molecules might create a barrier to limit self-assembly. Ionic solutes, from the salt, could screen the charges and mitigate the electrostatic repulsion to an extent that hydrogels could be formed41.
The secondary structure of the self-assembled hydrogels was investigated by comparing the circular dichroism (CD) and ATR-FTIR spectra of the resulting hydrogels with the spectra of the corresponding peptide mimics. The result demonstrated that structural modification had only showed a subtle change to the CD ellipticity without affecting the over-all secondary structure of the resulting hydrogels (Fig. S2). The CD spectra obtained from hydrogels 2–4, 6, 7, 9, and 10 all exhibited the presence of a negative minimum at around 200 nm along with a weak positive maximum around 220 nm, suggesting the formation of a random/disordered coil42,43.
Likewise, ATR-FTIR spectra also supported the formation of random/disordered coil within the cationic hydrogels. Both D2O gels and xerogels (air-dried gels) made from peptide mimics 2a–4a, 6a, 7a, 9a, and 10a peaks at 1645 ± 4.0 cm−1 and 1648 ± 2.0 cm−1 which conform to disordered/random coil secondary structures (Table S1)44.
The supramolecular morphologies of hydrogels made from NaA-capped peptide mimics were investigated using AFM. All the xerogels made from peptide mimics 2a–4a, 6a, 7a, 9a, and 10a exhibited nano fibrous network with a lot of junction zones which provided space responsible for immobilizing water molecules leading to hydrogel formation (Fig. 5).
3-D fibrous network observed from hydrogel made from (a) primary ammonium 2a, (b) tertiary ammonium 3a, (c) quaternary ammonium 4a, (d) fluoro 6a, (e) chloro 7a, (f) trifluoroacetate 9a, and (g) chloride 10a which were imaged at 4 × below their MGC. Meanwhile, (h) viscous solution of 2a at 0.05%w/v, without the addition of NaCl, demonstrated fibers with lack of junction zones.
Chemical modifications resulted in variation of the fibers size (diameter) but did not dramatically alter the morphology of the resulting hydrogels (Table 2). Changes on the fiber diameter could affect the mechanical properties of the resulting hydrogel. For instance, thicker fibers, hence smaller pores, resulted in restricted molecule displacement which often correspond with formation of more robust hydrogel45.
Additionally, AFM was also employed to further confirmed that the self-assembly had occurred in the viscous solution without addition of salt. In agreement with the 1H NMR and visual observation, fibers (74 ± 6 nm) lacking junction zones or bundling were observed from the viscous solution of peptide mimics 2a (Fig. 5h). This observation signified that the addition of salt to the viscous solution of peptide mimics 2a promotes fiber aggregation, which is pivotal in forming a self-supporting hydrogel.
For topical antibacterial application, AMPs have been mixed with hypromellose (a gel base), to obtain a more viscoelastic formulation46,47. The self-assembled properties of NaA-capped cationic peptide mimics allow for the formation of viscoelastic hydrogels without the presence of any additive. Frequency sweep test (FST) was performed using a rheometer to precisely examine the viscoelastic properties of the resulting hydrogels. From FST, all of the NaA-capped cationic peptide mimics showed viscoelastic properties consistent with the formation of stable hydrogels. As shown in Fig. S3, the G′ values of hydrogels made from peptide mimics 2a–4a, 6a, 7a, 9a, and 10a were at least a magnitude higher than their modulus loss (G″), which are indicative of elastic hydrogel characteristic rather than viscous materials48,49. In addition, their modulus storage (G′) were also frequency independent, which confirmed the structural stability of these hydrogels, and were comparable with other reported peptide-based self-assembled therapeutic hydrogels49,50,51,52.
Additionally, the mechanical rigidity of these hydrogels can be modulated by carefully altering the molecular design of the hydrogelators, particularly through variations of cationic group, substituent on the benzene ring of NaA capping group, and counter anion. G′ values often associated with mechanical rigidity of a hydrogel where higher G′ value ascribed to more robust hydrogels48. Changing the cationic group of the hydrogel from primary ammonium 2 to tertiary ammonium 3 and quaternary ammonium 4 significantly increase the G′ values from 0.83 to 8.63 kPa and 2.28 kPa, respectively (Table 3). The presence of a methyl group in hydrogels 3 and 4 was thought to decrease their flexibility, which presumably leads to formation of more robust hydrogels53.
Moreover, the mechanical rigidity gradually decreased as larger electron withdrawing group (EWG) was introduced on the NaA-capping group. The presence of a relatively small EWG, i.e. fluoro in hydrogel 6, resulted in a decrease of G′ value from 8.63 to 1.20 kPa (Table 3). A further decrease in G′ value (0.53 kPa) was observed for hydrogel 7, bearing a chloro substituent. Nevertheless, both fluoro 6 and chloro 7 demonstrated prominent characteristics of stable hydrogels (Fig. S3). This observation suggested that the electronegative and steric effects of substituents can be used to fine-tune the mechanical properties of the resulting hydrogels54.
Furthermore, changing the anion from gluconate (hydrogel 3) to trifluoroacetate (hydrogel 9) resulted in a subtle change in the rigidity of the hydrogel. However, the hydrogel 10 (bearing a chloride anion) exhibited a notable decrease of G′ value, presumably due to the absence of H-bonding capability of the counter anion (Cl−)55.
Staphylococcus aureus (S. aureus) is one of the major causative bacteria for skin and soft tissue infections56,57. Therefore, the NaA-capped cationic hydrogels were challenged against an inoculation of 3 × 104 CFUs/mL of S. aureus using a modification of a previously reported method58.
Hydrogel 2, bearing primary ammonium group, was found to be the most active and exhibited complete killing against S. aureus with a reduction of > 9.0 Log10 CFUs/mL compared to the controls after 18 h growth (Fig. 6). This hydrogel demonstrated improved activity when compared to previously reported short peptide-based hydrogels in combating S. aureus58,59,60,61. Additionally, hydrogel 2 exhibited significant bacteria reduction (5.5 Log10) even when it was tested against a higher inoculum of 108 CFUs/mL S. aureus colonies (Fig. S4).
Antibacterial activity of NaA-capped cationic hydrogel 2–4, 5–6, and 8–9 showed significant bacterial reductions ranging from 3.0 Log10 and > 9.0 Log10 against S. aureus. n = 3; p < 0.0001.
The architecture of the cationic groups plays a significant role in determining the antibacterial activity in solution. For example, anthranilamide-derived peptide mimics bearing cationic charges have been reported to exhibit a range of antibacterial properties against Gram-positive (MIC 2.0–62.5 µM) and Gram negative (MIC 15.6–125 µM) bacteria26. Similarly, hydrogel having the tertiary ammonium 3a and quatenary ammonium 4a, showed 5.1 Log10 and 4.1 Log10 reductions, respectively. The presence of methyl substituent on the cationic moiety seems to reduce the antibacterial activity of the resulting hydrogels, presumably due to the decrease in membrane binding capability62,63.
In contrast to the finding by Kuppusamy et al.26, the presence of a halogen atom and variation of the counter anion did not dramatically alter the antibacterial properties of the parent hydrogel 3. The hydrogels bearing fluoro (6), chloro (7), TFA− (9), and Cl− (10) exhibited 3.1 Log10, 5.0 Log10, 4.9 Log10, and 3.0 Log10, respectively.
The rheological properties, specifically the storage modulus G′, was reported to play a significant role in determining the antibacterial properties of multi domain peptide (MDP) hydrogels by providing a mechanical support to the fibrous networks against the restrained bacteria64. Surface chemistry of the supramolecular hydrogel nanofibers and their bulk rheological properties were thought to have a large effect on its antimicrobial activity. In contrast, no trend could be observed between the G′ value of the gels and their antibacterial activity in this study. This result suggests that the NaA-capped hydrogel inhibites bacteria growth in a different mechanism to MDP hydrogel.
To widen the scope of antibacterial study, the most active hydrogel against S. aureus made from primary ammonium 2a (hydrogel 2) was challenged against E. coli, a Gram-negative bacteria which is also associated with skin and soft tissue infection (SSTI)65,66,67. Hydrogel 2 showed notable antibacterial activity (6.4 Log10 reduction) against E. coli (Fig. S5). The difference in antibacterial activity between Gram-positive and Gram-negative was presumably due to the presence of additional outer bilayer membrane consist of lipopolysaccharide and phospholipid in Gram-negative bacteria68.
Mechanism of antibacterial actions for most short peptide-based hydrogels is still not fully understood, however one plausible mechanism is the release of active substance from the parent hydrogel. To examine this hypothesis, hydrogel 2 were immersed in water over 10 days and the release of the substance was monitored using UV/Vis spectroscopy.
The UV/Vis spectra showed peaks which centered at 235 nm and 290 nm. This result suggested that the cationic peptide mimics was released from hydrogel 2 and could account for the antibacterial activity observed. After incubation at 37 °C for 24 h, 0.15 mg/mL (221 µM) was quantified to be released from primary ammonium hydrogel 2. Furthermore, a continuous release profile was observed over 9 days with ~ 14% of total peptide mimics was released at the end of experiment (Fig. 7).
Hydrogel 2 at 1%w/v exhibited a sustainable released profile over 9 days. The graph represents two individual measurement and the some of the error bars are on the order of the graph point size.
Additionally, hydrogel 2 was subjected to a disk diffusion assay. A zone of inhibition with diameter of 2.3 cm was observed. This finding further demonstrates that an active agent was released from hydrogel 2.
AFM was performed on the supernatant solution to examine whether the supernatant solution was composed of monomers or intact nanofibers. Supramolecular nano fibers with diameter of 47 ± 4.9 nm were observed (Fig. 8a) despite the concentration of the peptide mimics at below their MGC (1 mg/mL) in the supernatant.
(a) Fibers with diameter of 47 ± 4.9 nm were observed from released solution of hydrogel 2; (b) AFM images of cationic peptide mimics 2a at 221 µM, which was prepared with DMSO (5%): water without forming the hydrogel, showed a mixture of thin fibers with lack of junction zones and spheroidal aggregates. Scale bar of AFM images was denoted as 1 µm. and (c) fibers released solution from hydrogel 2 exhibited bactericidal activity, with complete kill observed against S. aureus, meanwhile peptide mimics 2a as a monomer did not show notable reduction.
The antibacterial efficacy of the released nano fibers collected from supernatant solutions on day 1–9 were evaluated using a microdilution protocol69. The nano fibers were found to have a minimum inhibitory concentration (MIC) of 62 µM (Fig. 8c) against S. aureus. As seen in Fig. 7, the hydrogel released nanofibers above the active concentration within all 24 h periods across the 9 days.
Supramolecular nano fibers have been reported to enhance the antibacterial activity, presumably due to higher local cationic densities on the fibrils50. Interestingly, the antibacterial activity of NaA-based cationic peptide mimics also relies on the self-assembled morphologies. At the same concentration (62 µM), cationic peptide mimics 2a (as a free compound) did not showed significant bacteria reductions (< 1Log10 CFU/mL) (Fig. 8c, grey). AFM images obtained for short cationic peptide mimics 2a, which was prepared without forming the hydrogel, showed a mixture of fibers with spheroidal aggregates and lack of junction zones (Fig. 8b).
Aside from exhibiting antibacterial properties, ideal candidates for antibacterial biomaterial need to exhibit low toxicity against mammalian cells. Therefore, the cytotoxicity of hydrogel 2 made from primary ammonium 2a, at various concentrations was examined against HEK293T cells.
More than 80% cells viability were observed indicating that hydrogel 2 was not toxic to normal cells (Fig. 9). The remarkable antibacterial activity and low toxicity of hydrogel 2 makes it a promising candidate for development as an antibacterial biomaterial.
Hydrogel 2 exhibited low toxicity against HEK293T cells for all concentrations tested, suggesting their low toxicity. ns: not significant.
A library of ultra-short NaA-capped hydrogelators having only one amino acid (l -phenylalanine) have been synthesised in excellent yields. Majority of the synthesised cationic peptide mimics efficiently formed hydrogels at low concentration under physiological pH. The resulting hydrogels adopted disordered coil as secondary structures and exhibited desirable mechanical properties, with rigidity modulated by either varying the cationic group, substituent on the anthranilamide-core, or counter anion. The peptide mimics are derived simply from readily available starting materials and the reactions are done in solution phase, which are more amenable to large-scale synthesis compared to current peptide based LMWG. We have also demonstrated the structural flexibility and versatile control over the many structural variations that can be constructed in NaA-capped gelators. This class of gelators represent a substantial departure from other LMWGs, enabling, for the first time, a systematic examination of the effects of different chemical moieties on intramolecular interactions which induce self-assembly and hydrogel formation, while also enabling function such as antibacterial activity.
The NaA-capped cationic hydrogels, particularly primary ammonium 2, displayed promising antibacterial properties with significant bacteria reduction against S. aureus (> 9.0 Log10) and E. coli (6.4 Log10). Furthermore, the antibacterial activities of these hydrogels were attributed to the released of nanofibers. The most active hydrogel primary ammonium 2 demonstrated a continuous nanofiber released profile that was antibacterial over 9 days. Additionally, this hydrogel also exhibited low toxicity (> 80% viability) against HEK293T cells.
These intrinsically antibacterial and non-toxic hydrogels are ideal candidates for further development in applications where bacterial contamination is problematic.
All chemicals and solvents used were purchased from Chemimpex, Combi Blocks, and Sigma Aldrich and were used directly without any further purification.
The Naphthyl anthranilamide-capped cationic peptide mimics 1a–10a were synthesized via ring-opening reaction of isatoic anhydride derivatives as previously reported25. The scheme and synthetic procedures to obtain hydrogelators 1–10 along with their characterization data (1H NMR, 13C NMR, and HRMS) are given in the supplementary information.
Respective amount of hydrogelator 1–10 was added to each vial with internal diameter (i.d.) of 10 mm containing Mili-Q water. For, hydrogelators 1–8, GdL (1.5 equivalents) was subsequently added. The resulting suspensions of 1–10 were slowly heated until all of the solid completely dissolved. Afterwards, NaCl (5 equivalents) was added to each vial to make up total volume of 1 mL, followed by gentle mixing. The resulting clear solution was left at room temperature without disturbance for 3 h. The vials were then inverted to confirm the hydrogel formation. MGC, represent as a percentage, is the minimum weight of hydrogelator required to form a self-supporting hydrogel divided by the total volume.
The NMR sample of the monomer was prepared by dissolving 2 mg of primary ammonium 2a in 650 µL of DMSO d-6. Meanwhile, the NMR sample of the viscous solution was prepared by dissolving respective amount of 2a and GdL in 650 µL of D2O to make up concentration of 0.1, 0.2, and 0.3%w/v. Subsequently, NaCl was added to the viscous solution of 2a at 0.3%w/v and the spectra was recorded once again using a Bruker Avance III 400 MHz NMR spectrometer. NMR spectra were processed using MestreNova software.
Hydrogels 2–4, 6, 7, 9, and 10 were prepared at 1%w/v and were diluted 8 times in Mili-Q water before being transferred into a 0.2 mm path length cuvette. The spectra were collected using ChirascanPlus CD spectrometer (Applied Photophysic UK) scanning wavelengths of 180–500 nm with a bandwidth of 1 nm, 0.6 s per point, and step of 1 nm. Each experiment was performed in triplicate and the results were averaged into a single plot value.
The ATR-FTIR spectra were obtained using a Spectrum 100 FTIR spectrometer (PerkinElmer, USA) fitted with a 1 mm diamond-ZnSe crystal. Xerogels were made in situ by applying nitrogen flow to one drop of the pre-formed hydrogels (2%w/v) which was place on the ATR-crystal. The spectra of xerogels 2–4, 6, 7, 9, and 10 were recorded from 4000 to 650 cm−1 with a 4 cm−1 resolution and 4 scans.
The spectra of D2O gels were measured by applying two drops of pre-formed gels at 2%w/v on the ATR crystal which was then recorded from 4000 to 650 cm−1 with a 4 cm−1 resolution and 4 scans.
Hydrogels 2–4, 6, 7, 9, and 10 were prepared from the corresponding cationic peptide mimics at their MGC, 2 × below, and 4 × below MGC in glass vials. Prior to gelation, one drop of these peptide mimics solutions was casted onto a mica substrate. Using a glass slide, each droplet was carefully spread and was left to dry overnight before imaging. Imaging was performed using a Bruker Multimode 8 Atomic Force Microscope in Scanasyst Air (PeakForce Tappings) mode, which is based on tapping mode AFM. To prevent damage of soft samples, the imaging parameters were constantly optimized through the force curves that were collected. Bruker Scanasyst-Air probes were used, with a spring constant of 0.4–0.8 N m−1 and a tip radius of 2 nm.
To gain some insight on the mechanism of antibacterial action, the released solutions from hydrogel 2 was directly casted on to a mica substrate. In addition, respective amount peptide mimics 2a and GdL were dissolved in DMSO-Water (5%: 95%) which then diluted to obtained concentration of 221 µM before casted on a mica substrate. After gently spread using a glass slide and left to dried overnight, these samples were imaged using a similar manner as describe above.
The mechanical properties of NaA-capped cationic hydrogels were assessed using an Anton Paar MCR 302 rheometer with a 25 mm stainless parallel plate configuration.
Initially, 1 mL of hydrogels were prepared from peptide mimics 2a–4a, 6a, 7a, 9a, and 10a in glass vials at concentration of 1%w/v. These vials were warmed using a heat gun to transform the hydrogel to the solution phase. Subsequently, 560 µL of the resulting solutions were cast onto the rheometer plate. The other plate was lowered to the measuring position (1 nm) and the hydrogel was allowed to stand for 3 h for the gel to form. Initially strain sweep test (SST) was performed at a frequency of 1 Hz using 0.1% strain to 100% strain to identified the linear viscoelastic region of each hydrogel. Subsequently, frequency sweep test (FST) was conducted at fixed strain of 0.1%, which is within the LVER of all hydrogels, and frequency ranging from 10 to 0.01 Hz. The rheology data were shown as the average of three repeats for each data point.
Hydrogel 2 was made at 1%w/v with final volume of 1 mL using the same method as described above. The resulting hydrogel was left to stand overnight at room temperature. PBS (1 mL) was added gently from the side wall to avoid physical fractures. Subsequently, the vial was incubated at 37 °C, where 1 mL of PBS was sampled at each time point and replaced with fresh PBS. The samples were subjected to 10 × dilution before quantified using UV–Vis spectroscopy. This experiment was performed in triplicate.
A single colony of S. aureus 38 or E. coli K12 was grown overnight in Laura Brentani (LB) broth at 37 °C. The resulting suspension were centrifuged and re-suspended in the same volume of LB twice. The optical density (OD) of the resulting bacteria culture was adjusted to 0.1 at 600 nm in LB (108 CFUs/mL) which further adjusted to 3 × 104 CFUs/mL. Bacteria solutions (1 mL), which contain either 108 CFUs/mL or 3 × 104 CFUs/mL, was gently added to hydrogel 2 at 1%w/v with total volume of 1 mL. After being incubated at 37 °C for 18 h, 100 µL of bacteria solution in each vial was taken and subjected to serial dilution using phosphate buffer solution (PBS). 20 µL of each dilution were carefully transferred into nutrient agar plates and incubated for another 18 h. The following day, bacterial growth inhibition was quantified using the viable count method. The experiment was performed twice in triplicate and multiple sample comparison was performed using one-way ANOVA.
To further investigate their antibacterial activity, the released fibers from hydrogel 2 were tested against S. aureus 38. The solution taken from day 1 (contain ~ 221 uM) was adjusted to obtained final concentrations of 125, 62.5, 31.25, and 18 µM. On the other hand, monomers solution of cationic peptide mimics 2a, that has not formed hydrogels, was prepared by dissolving a known amount of peptide mimics 2a in DMSO to give a 20 mM stock solution which then diluted with LB to make up concentration of 125, 62.5, 31.25, and 18 µM. 100 µL of the above peptide mimics monomer and fiber solution was transferred to a 96 well plates.
Subsequently, 100 µL bacteria solution (106 CFUs/mL) was added to each well containing samples. A blank control was used: one containing 100 µL of bacteria solution and 100 µL of PBS. The plate was then incubated at 37 °C for 24 h. The following day, 20 µL solution from each well was subjected to a serial dilution then transferred onto agar plates followed by incubation at 37 °C for another 24 h. MIC value was determined as the lowest concentration that inhibited S. aureus growth on the agar plate70.
Cytotoxicity measurements were performed in HEK293T cells using an alamarBlue colorimetric assay. Each experiment was repeated at least three times25. Cells were passaged using standard cell culture procedures. Cells were detached with trypsin and centrifuged (1000 rpm for 3 min). The supernatant was removed and the cells re-suspended in Dulbecco’s Modified Eagle Medium (DMEM) at a concentration of 100,000 cells per mL. Cells were seeded at a concentration of 6,000 cells per well. For cytotoxicity measurements, 100 mL of hydrogel 2 at 0.3, 0.6, and 1.0%w/v were added in triplicate to a 96-well plate and allowed to set overnight. Surrounding wells were supplemented with water to ensure hydration of the gels. Gels were then incubated for 24 h with DMEM. Cells were seeded atop the hydrogels and incubated for 24 h. 10 mL of Alamar Blue was added to the wells, followed by further incubation for 4 h. Control wells included cell-free gels, no hydrogels and a negative control of 15% (v/v) DMSO. The absorbances at 570 nm and 596 nm were recorded using a BioRad Benchmark plate reader.
The datasets used and/or analysed during the current study are available from the corresponding author on reasonable request.
Fleming, S. & Ulijn, R. V. Design of nanostructures based on aromatic peptide amphiphiles. Chem. Soc. Rev. 43, 8150–8177 (2014).
Gao, Y. et al. Enzyme-instructed molecular self-assembly confers nanofibers and a supramolecular hydrogel of taxol derivative. J. Am. Chem. Soc. 131, 13576–13577 (2009).
Modepalli, V. N. et al. In vitro response to functionalized self-assembled peptide scaffolds for three-dimensional cell culture. Pept. Sci. 102, 197–205 (2014).
Yadav, N., Chauhan, M. K. & Chauhan, V. S. Short to ultrashort peptide-based hydrogels as a platform for biomedical applications. Biomater. Sci. 8, 84–100 (2020).
Fichman, G. & Gazit, E. Self-assembly of short peptides to form hydrogels: Design of building blocks, physical properties and technological applications. Acta Biomater. 10, 1671–1682 (2014).
Chen, L., Revel, S., Morris, K., Serpell, L. C. & Adams, D. J. Effect of molecular structure on the properties of naphthalene: Dipeptide hydrogelators. Langmuir 26, 13466–13471 (2010).
Chen, L. et al. Self-assembly mechanism for a naphthalene: Dipeptide leading to hydrogelation. Langmuir 26, 5232–5242 (2010).
Martin, A. D., Robinson, A. B., Mason, A. F., Wojciechowski, J. P. & Thordarson, P. Exceptionally strong hydrogels through self-assembly of an indole-capped dipeptide. Chem. Commun. 50, 15541–15544 (2014).
Martin, A. D., Wojciechowski, J. P., Warren, H. & Thordarson, P. Effect of heterocyclic capping groups on the self-assembly of a dipeptide hydrogel. Soft Matter 12, 2700–2707 (2016).
Article ADS CAS Google Scholar
Hsu, S.-M. et al. A supramolecular hydrogel self-assembled from pentafluorobenzyl-dipeptide. RSC Adv. 5, 32431–32434 (2015).
Article ADS CAS Google Scholar
Zhang, Y. et al. Molecular recognition remolds the self-assembly of hydrogelators and increases the elasticity of the hydrogel by 106-fold. J. Am. Chem. Soc. 126, 15028–15029 (2004).
Martin, A. D. & Thordarson, P. Beyond Fmoc: A review of aromatic peptide capping groups. J. Mater. Chem. B 8, 863–877. https://doi.org/10.1039/C9TB02539A (2020).
Lombardi, L., Falanga, A., Del Genio, V. & Galdiero, S. A new hope: Self-assembling peptides with antimicrobial activity. Pharmaceutics 11, 166 (2019).
Briuglia, M.-L., Urquhart, A. J. & Lamprou, D. A. Sustained and controlled release of lipophilic drugs from a self-assembling amphiphilic peptide hydrogel. Int. J. Pharm. 474, 103–111 (2014).
Snigdha, K., Singh, B. K., Mehta, A. S., Tewari, R. & Dutta, P. Self-assembling N-(9-Fluorenylmethoxycarbonyl)-l-Phenylalanine hydrogel as novel drug carrier. Int. J. Biol. Macromol. 93, 1639–1646 (2016).
Reddy, S. M. M., Shanmugam, G., Duraipandy, N., Kiran, M. S. & Mandal, A. B. An additional fluorenylmethoxycarbonyl (Fmoc) moiety in di-fmoc-functionalized L-lysine induces pH-controlled ambidextrous gelation with significant advantages. Soft Matter 11, 8126–8140 (2015).
Article ADS CAS Google Scholar
Aldilla, V. R. et al. Glyoxylamide-based self-assembly hydrogels for sustained ciprofloxacin delivery. J. Mater. Chem. B 6, 6089–6098 (2018).
Marchesan, S. et al. Self-assembly of ciprofloxacin and a tripeptide into an antimicrobial nanostructured hydrogel. Biomaterials 34, 3678–3687 (2013).
Baral, A. et al. Assembly of an injectable noncytotoxic peptide-based hydrogelator for sustained release of drugs. Langmuir 30, 929–936 (2014).
Paladini, F. et al. Silver-doped self-assembling di-phenylalanine hydrogels as wound dressing biomaterials. J. Mater. Sci. Mater. Med. 24, 2461–2472 (2013).
Guo, Y., Wang, S., Du, H., Chen, X. & Fei, H. Silver ion-histidine interplay switches peptide hydrogel from antiparallel to parallel β-assembly and enables controlled antibacterial activity. Biomacromol 20, 558–565 (2018).
McCloskey, A. P., Draper, E. R., Gilmore, B. F. & Laverty, G. Ultrashort self-assembling Fmoc-peptide gelators for anti-infective biomaterial applications. J. Pept. Sci. 23, 131–140 (2017).
Debnath, S., Shome, A., Das, D. & Das, P. K. Hydrogelation through self-assembly of Fmoc-peptide functionalized cationic amphiphiles: Potent antibacterial agent. J. Phys. Chem. B 114, 4407–4415 (2010).
Laverty, G. et al. Ultrashort cationic naphthalene-derived self-assembled peptides as antimicrobial nanomaterials. Biomacromol 15, 3429–3439 (2014).
Aldilla, V. R. et al. Anthranilamide-based short peptides self-assembled hydrogels as antibacterial agents. Sci. Rep. 10, 1–12 (2020).
Kuppusamy, R. et al. Guanidine functionalized anthranilamides as effective antibacterials with biofilm disruption activity. Org. Biomol. Chem. 16, 5871–5888. https://doi.org/10.1039/C8OB01699B (2018).
Exley, S. E. et al. Antimicrobial peptide mimicking primary amine and guanidine containing methacrylamide copolymers prepared by raft polymerization. Biomacromol 16, 3845–3852 (2015).
Locock, K. E. et al. Guanylated polymethacrylates: A class of potent antimicrobial polymers with low hemolytic activity. Biomacromol 14, 4021–4031 (2013).
Gabriel, G. J. et al. Synthetic mimic of antimicrobial peptide with nonmembrane-disrupting antibacterial properties. Biomacromol 9, 2980–2983 (2008).
Chen, L. et al. Salt-induced hydrogelation of functionalised-dipeptides at high pH. Chem. Commun. 47, 12071–12073 (2011).
Cardoso, A. Z. et al. Linking micellar structures to hydrogelation for salt-triggered dipeptide gelators. Soft Matter 12, 3612–3621 (2016).
Article ADS CAS Google Scholar
Castilla, A. M. et al. On the syneresis of an OPV functionalised dipeptide hydrogel. Soft Matter 12, 7848–7854 (2016).
Article ADS CAS Google Scholar
Nizalapur, S. et al. Synthesis and biological evaluation of N-naphthoyl-phenylglyoxamide-based small molecular antimicrobial peptide mimics as novel antimicrobial agents and biofilm inhibitors. Org. Biomol. Chem. 14, 3623–3637 (2016).
Niehoff, A. et al. Elucidation of the structure of poly (γ-benzyl-L-glutamate) nanofibers and gel networks in a helicogenic solvent. Colloid Polym. Sci. 291, 1353–1363 (2013).
Leenders, C. M. et al. From supramolecular polymers to hydrogel materials. Mater. Horiz. 1, 116–120 (2014).
Lozano, V. et al. An asparagine/tryptophan organogel showing a selective response towards fluoride anions. J. Mater. Chem. 21, 8862–8870 (2011).
Ramalhete, S. M. et al. Supramolecular amino acid based hydrogels: Probing the contribution of additive molecules using NMR spectroscopy. Chem. A Eur. J. 23, 8014–8024 (2017).
Singh, V., Snigdha, K., Singh, C., Sinha, N. & Thakur, A. K. Understanding the self-assembly of Fmoc–phenylalanine to hydrogel formation. Soft Matter 11, 5353–5364 (2015).
Article ADS CAS Google Scholar
Ryan, D. M., Doran, T. M., Anderson, S. B. & Nilsson, B. L. Effect of C-terminal modification on the self-assembly and hydrogelation of fluorinated Fmoc-Phe derivatives. Langmuir 27, 4029–4039 (2011).
Singh, V., Rai, R. K., Arora, A., Sinha, N. & Thakur, A. K. Therapeutic implication of L-phenylalanine aggregation mechanism and its modulation by D-phenylalanine in phenylketonuria. Sci. Rep. 4, 3875 (2014).
Rapaport, H., Grisaru, H. & Silberstein, T. Hydrogel scaffolds of amphiphilic and acidic β-sheet peptides. Adv. Func. Mater. 18, 2889–2896 (2008).
Davies, R. et al. Self-assembling β-sheet tape forming peptides. Supramol. Chem. 18, 435–443 (2006).
Johnson, W. C. Jr. Secondary structure of proteins through circular dichroism spectroscopy. Annu. Rev. Biophys. Biophys. Chem. 17, 145–166 (1988).
Yang, H., Yang, S., Kong, J., Dong, A. & Yu, S. Obtaining information about protein secondary structures in aqueous solution using Fourier transform IR spectroscopy. Nat. Protoc. 10, 382 (2015).
Kouwer, P. H. et al. Responsive biomimetic networks from polyisocyanopeptide hydrogels. Nature 493, 651 (2013).
Article ADS CAS Google Scholar
Haisma, E. M. et al. Antimicrobial peptide P60: 4Ac-containing creams and gel for eradication of methicillin-resistant Staphylococcus aureus from cultured skin and airway epithelial surfaces. Antimicrob. Agents Chemother. 60, 4063–4072 (2016).
de Breij, A. et al. The antimicrobial peptide SAAP-148 combats drug-resistant bacteria and biofilms. Sci. Transl. Med. 10, eaan4044 (2018).
Ross-Murphy, S. & Kavanagh, G. Rheological characterisation of polymer gels. Prog. Polym. Sci. 23, 533–562 (1998).
Nagarkar, R. P., Hule, R. A., Pochan, D. J. & De Schneider, J. P. novo design of strand-swapped β-hairpin hydrogels. J. Am. Chem. Soc. 130, 4466–4474 (2008).
Sarkar, B. et al. Membrane-disrupting nanofibrous peptide hydrogels. ACS Biomater. Sci. Eng. 5, 4657–4670 (2019).
Kumar, V. A. et al. Highly angiogenic peptide nanofibers. ACS Nano 9, 860–868 (2015).
Wickremasinghe, N. C., Kumar, V. A., Shi, S. & Hartgerink, J. D. Controlled angiogenesis in peptide nanofiber composite hydrogels. ACS Biomater. Sci. Eng. 1, 845–854 (2015).
Tomasini, C. & Castellucci, N. Peptides and peptidomimetics that behave as low molecular weight gelators. Chem. Soc. Rev. 42, 156–172 (2013).
Ryan, D. M., Anderson, S. B. & Nilsson, B. L. The influence of side-chain halogenation on the self-assembly and hydrogelation of Fmoc-phenylalanine derivatives. Soft Matter 6, 3220–3231 (2010).
Article ADS CAS Google Scholar
Hou, J., Wu, X. & Li, Y.-J. Anion influenced self-assembly of stilbazolium derivative and acid-sensitive property of its corresponding gel. Supramol. Chem. 23, 533–538 (2011).
Zhang, L.-J. et al. Dermal adipocytes protect against invasive Staphylococcus aureus skin infection. Science 347, 67 (2015).
Article ADS CAS Google Scholar
Miller, L. S. & Cho, J. S. Immunity against Staphylococcus aureus cutaneous infections. Nat. Rev. Immunol. 11, 505 (2011).
Irwansyah, I. et al. Gram-positive antimicrobial activity of amino acid-based hydrogels. Adv. Mater. 27, 648–654 (2015).
Gahane, A. Y. et al. Fmoc-phenylalanine displays antibacterial activity against Gram-positive bacteria in gel and solution phases. Soft Matter 14, 2234–2244 (2018).
Article ADS CAS Google Scholar
Wang, K. et al. A novel non-releasing antibacterial hydrogel dressing by one-pot method. ACS Biomater. Sci. Eng. https://doi.org/10.1021/acsbiomaterials.9b01812 (2020).
Misra, S. et al. Single amino-acid based self-assembled biomaterials with potent antimicrobial activity. Chem. A Eur. J. https://doi.org/10.1002/chem.202103071 (2021).
Palermo, E. F., Lee, D.-K., Ramamoorthy, A. & Kuroda, K. Role of cationic group structure in membrane binding and disruption by amphiphilic copolymers. J. Phys. Chem. B 115, 366–375 (2011).
Carmona-Ribeiro, A. M. & de Melo Carrasco, L. D. Cationic antimicrobial polymers and their assemblies. Int. J. Mol. Sci. 14, 9906–9946 (2013).
Jiang, L., Xu, D., Sellati, T. J. & Dong, H. Self-assembly of cationic multidomain peptide hydrogels: Supramolecular nanostructure and rheological properties dictate antimicrobial activity. Nanoscale 7, 19160–19169. https://doi.org/10.1039/C5NR05233E (2015).
Article ADS CAS Google Scholar
Microbiology Series, N. The Battle Against Microbial Pathogens: Basic Science, Technological Advances and Educational Programs.
Ki, V. & Rotstein, C. Bacterial skin and soft tissue infections in adults: A review of their epidemiology, pathogenesis, diagnosis, treatment and site of care. Can. J. Infect. Dis. Med. Microbiol. 19, 173–184 (2008).
Petkovšek, Zi., Elersič, K., Gubina, M., Zgur-Bertok, D. & Starčič Erjavec, M. Virulence potential of Escherichia coli isolates from skin and soft tissue infections.J. Clin.Microbiol.47, 1811–1817 (2009).
Roy, S. & Das, P. K. Antibacterial hydrogels of amino acid-based cationic amphiphiles. Biotechnol. Bioeng. 100, 756–764 (2008).
Wiegand, I., Hilpert, K. & Hancock, R. E. Agar and broth dilution methods to determine the minimal inhibitory concentration (MIC) of antimicrobial substances. Nat. Protoc. 3, 163–175 (2008).
Sykes, J. E. & Rankin, S. C. Isolation and identification of aerobic and anaerobic bacteria. In Canine and Feline Infectious Diseases 17–28 (Elsevier, 2013).
The authors would like to acknowledge the Indonesia Endowment Fund for Education (LPDP) for PhD Scholarship given to VRA and the Mark Wainwright Analytical Centre facilities at UNSW Australia for supporting the characterization of the synthesized compounds. This work was supported by Australian Research Council Discovery grant (DP180100845).
School of Chemistry, The University of New South Wales, Sydney, NSW, 2052, Australia
Vina R. Aldilla, Renxun Chen, Rajesh Kuppusamy, Sudip Chakraborty, David StC. Black, Pall Thordarson & Naresh Kumar
School of Optometry and Vision Science, The University of New South Wales, Sydney, NSW, 2052, Australia
Rajesh Kuppusamy & Mark D. P. Willcox
Faculty of Medicine and Health Sciences, Dementia Research Centre, Macquarie University, Sydney, NSW, 2109, Australia
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
Conceptualization: N.K., A.D.M, R.C. D.Stc.B. Resources: N.K., M.D.P.W., Funding: N.K., D. Stc. B., Supervision: P.T., Investigation: V.R.A, R.K., A.D.M. S.C. Methodology: R.C., Writing initial draft: V.R.A, Review & Edit: R.C., A.D.M., D. Stc. B., N.K.
Correspondence to Renxun Chen or Naresh Kumar.
The authors declare no competing interests.
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
Aldilla, V.R., Chen, R., Kuppusamy, R. et al. Hydrogels with intrinsic antibacterial activity prepared from naphthyl anthranilamide (NaA) capped peptide mimics. Sci Rep 12, 22259 (2022). https://doi.org/10.1038/s41598-022-26426-1
DOI: https://doi.org/10.1038/s41598-022-26426-1
Anyone you share the following link with will be able to read this content:
Sorry, a shareable link is not currently available for this article.
Provided by the Springer Nature SharedIt content-sharing initiative
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.
Scientific Reports (Sci Rep) ISSN 2045-2322 (online)
29022-11-5 Fmoc-Glycine Sign up for the Nature Briefing: Microbiology newsletter — what matters in microbiology research, free to your inbox weekly.