Langley Research Center, Hampton, VA
A team of inventors from NASA Langley and NASA Ames have created a new type of carbon fiber polymer composite that has a high thermal conductivity. This was achieved by incorporating Pyrolytic Graphite Sheets (PGSs) and Carbon Nanotubes (CNTs), which enhance the material’s ability to transfer heat when compared to typical carbon fiber composites. Electrode Graphite Uses
Carbon fiber polymer composites are frequently used in aerospace structures because they are light, strong, and require minimal maintenance. However, they typically have poor thermal conductivity, which limits their use to applications where heat transfer is not required. Where heat transfer is needed, aluminum alloys are used instead, but they have drawbacks such as lower strength, higher weight, and increased maintenance needs compared to composites. The new material developed by NASA addresses this issue by combining the benefits of a carbon fiber composite with the high thermal conductivity of metal alloys.
NASA has also improved the composite manufacturing process to ensure better thermal conductivity not only on the surface, but also through the thickness of the material. This was achieved by adding perforations that enable the additives to spread through the composite. The process for developing this innovative, highly thermally conductive hybrid carbon fiber polymer composite involves several steps.
First, a CNT-doped polymer resin is prepared to improve the matrix’s thermal conductivity, which is then infused into a carbon fiber fabric. Second, PGS is treated to enhance its mechanical interface with the composite. Third, perforation is done on the pyrolytic graphite sheet to improve the thermal conductivity through the thickness of the material by allowing CNT-doped resin to flow and better interlaminar mechanical strength. Finally, the layup of PGS and CNT-CF polymer is optimized. Initial testing of the composite has shown significant increases in thermal conductivity compared to typical carbon fiber composites, with a more than tenfold increase. The composite also has higher thermal conductivity than aluminum alloys, with more than twice the thermal conductivity of the Aluminum 6061 typically used in the aerospace industry.
NASA is currently working on using this material for in-space applications, such as heat exchangers or radiators for removing carbon dioxide from the crew cabin atmosphere. On Earth, the composite could be used to create new radiators or heat exchangers for use in automotive or electronics applications.
NASA is actively seeking licensees to commercialize this technology. Please contact NASA’s Licensing Concierge at This email address is being protected from spambots. You need JavaScript enabled to view it. or call at 202-358-7432 to initiate licensing discussions. For more information, visit here .
This article first appeared in the April, 2024 issue of Tech Briefs Magazine.
Read more articles from this issue here.
Read more articles from the archives here.
A Breakthrough in Fast-Charging Lithium-Sulfur Batteries
Humanoid Robots: The Next-Generation Robotic Workforce
All-Liquid Iron Flow Battery Is Safe, Economical
The First High-Resolution, 3D-Printed Brain
A New Process for Turning CO2 into Sustainable Fuel
Giving Household Robots Common Sense
Testing New Unmanned Aircraft Technologies
100% Cloud CAD - The Future of Design Is Now
Virtual Twin as an Accelerator of ADAS and AD Development
Innovating Aircraft Interiors: How to Decrease Weight and Optimize Parts Production
Accelerated SDV Development: Virtual Prototypes of Vehicle Super-Integration Processors
Handling Unexpected Biocompatibility Test Results in Medical Device Development
Recreating ‘Star Trek’ Virtual Environments
Answering Your Questions: Lithium-Air Battery vs. Lithium-Ion
How Much Do You Know About Fiber Optics?
Comparison Between Wave Soldering and Reflow Soldering
Printed Electronics: The Future Is Flexible
Polycarbonate Seen As Top Choice for LED Lighting
Mapping Gravity with Motion Control
The Modern Industrial Workhorse: PID Controllers
The Basics of Encoder Selection
Researchers Demonstrate Cutting-Edge Chip Technology for Ultra-Low Power AI...
Smart Sensor Technology for the IoT
Networking the IoT with IEEE 802.15.4/6LoWPAN
Opening Up the Potential of Thin-Film Electronics for Flexible Chip Design
Laser Beam vs. Electron Beam Welding Which process works best for what?
Jet-Propelled Sea Creatures Could Improve Ocean Robotics
Mechanical Carbon Materials for Aircraft Seal Applications
Brushless Motors for In-Tank Fuel Pumps
3 eVTOL Companies to Watch in 2024: Archer Aviation, Joby Aviation, and Lilium
The Future of eVTOL Battery Technology
The Future of Hybrid and Electric Military Vehicles
By submitting your personal information, you agree that SAE Media Group and carefully selected industry sponsors of this content may contact you and that you have read and agree to the Privacy Policy.
You may reach us at privacy@saemediagroup.com.
You may unsubscribe at any time.
Large Flake Graphite © 2009-2024 SAE Media Group