World Of Controls understands the criticality of your requirement and works towards reducing the lead time as much as possible.
5466-348 - Netcon SIO Module is available in stock which ships the same day. DS200DMCBG1AED
5466-348 - Netcon SIO Module comes in UNUSED as well as REBUILT condition.
To avail our best deals for 5466-348 - Netcon SIO Module , contact us and we will get back to you within 24 hours.
Part Number: 5466-348 Manufacturer: Woodward Product type: Netcon SIO Module Rate Group: One driver per port, 5 milliseconds Protoco:l RS-485 UART Baud Rate: 417 kbaud Parity: None Data Bits: 8 Stop Bit: 1 Availability: In Stock Country of Manufacture: United States (USA)
5466-348 is a Netcon SIO Module developed by Woodward. SIO Module is equipped with three RS-485 ports. Each port is intended for use with EM or GS/LQ Digital Actuator Drivers. Every 5 ms, one driver is allowed for each port. The address switches of each driver must match the driver number in the GAP application program. The Universal Digital Drivers' RS-485 communications can be used for monitoring or control.
World of Controls has the most comprehensive selection of GE and Woodward components. Our professionals are available to help you with your requirements at any time. If you require any additional information, please contact WOC immediately.
What is 5466-348? It is Netcon SIO Module developed by Woodward.
How many drivers can be connected to each RS-485 port? Each RS-485 port allows for the connection of one driver. Therefore, the module can accommodate a total of three drivers, one for each port.
What is the update rate for critical parameters when using one driver per port? When using one driver per port, the update rate for critical parameters is 5 milliseconds. This means that important data related to the actuator drivers can be refreshed every 5 milliseconds.
Can each RS-485 port operate at a different rate group? Yes, each RS-485 port on the SIO Module can operate at a different rate group. This allows for flexibility in configuring the communication speed or baud rate for each port based on specific requirements.
How are communication faults of the drivers detected? The SIO Module actively detects communication faults of the drivers. If a communication fault is detected for a specific driver, that driver will be disabled. This helps to ensure the integrity and reliability of the communication between the module and the drivers.
RAS AL KHAIMAH ECONOMIC ZONE (RAKEZ) SHED 18 WH 2, 3, 7, 10 & 11
AL HAMRAH INDUSTRIAL ZONE FZ
RAS AL KHAIMAH, UAE, PO BOX:54566
177230-01-02-05 © Copyright 2024 World Of Controls FZE. and its affiliated companies are not directly affiliated with any of the companies whose products we sell. Many of the names of manufacturers or products in our inventory are trademarks of the respective manufacturer.