Blog

Dry type three phase transformer for industrial, EV charger and...

The 3PH Series of dry type transformer from the Signal Transformer division of Bel Fuse is adaptable to multiple requirements and permanently configured for a 3 phase DELTA input and a WYE output.

An electrostatic shield (ESS) between input/output windings attenuates line noise by preventing feed-through of undesirable signals and serves as a safety feature in the event of single fault conditions. 10kv Oil Type taansformer

Dry type three phase transformer for industrial, EV charger and...

The dry type rigid transformers are built with a robust Class H (180℃), reinforced UL 1446 File E66312 insulation system, a 4KV dielectric withstanding rating, a 130℃ max self-heating temperature @ 40℃ max ambient, and low leakage current capability.

Target applications include MRI, radiation, and other medical equipment, machine tooling, welding machines, along with wind, solar, and lighting power conversion systems.

Therigid transformers operate at 50 or 60 Hz frequency, delivering a range of power from 2KVA to 35KVA with a max 500 VAC input voltage and 69A RMS max load current, featuring efficiencies of greater than 93%. All 3PH models are UL recognized to UL 60601-1 medical standard for construction under UL File E151299.

Signal say they can easily modify these transformers to create many variations for client needs in a relatively short time.

Dry type three phase transformer for industrial, EV charger and...

Single Phase Transformer All material on this site Copyright © 2022 European Business Press SA. All rights reserved.