This website uses cookies primarily for visitor analytics. Certain pages will ask you to fill in contact details to receive additional information. On these pages you have the option of having the site log your details for future visits. Indicating you want the site to remember your details will place a cookie on your device. To view our full cookie policy, please click here. You can also view it at any time by going to our Contact Us page.
The full-size flange is spot-welded to the base to give a very strong and smooth mounting plate for use when the units are secured to a surface. The 18 sizes range from 50mm x 45mm x 30mm to 223mm x 147mm x 83 mm, with the lids' thickness ranging from 5mm to 33mm in depth, depending on the size. The tongue and groove design and a pre-formed one-piece silicone rubber gasket give the IP68 environmental protection so the enclosures are ideal for installation in environments where dust and water will be present. They are UL and cUL listed and have been independently tested to IP66, IP67 and IP68 and they are also rated to NEMA Type 4, 4X, 12 and 13. All sizes except the smallest have an impact rating of IK08, defined in IEC 62262 as the equivalent of the impact of a 1.7kg mass dropped from 300mm above the impacted surface. Depending on the size, the lid is secured to the base with either two, four or six stainless steel Philips machine screws located outside the gasket area, giving repeated access without degrading the environmental protection. They are available in a natural finish or with a tough polyester black powder finish to both the outside and inside of the enclosure. Clear areas in the painted versions are provided around the grounding points. aluminum exterior doors
painting aluminum wheels Print this page | E-mail this page