On October 4, 2023, the US Aluminum Extruders Coalition and the United Steel, Paper and Forestry, Rubber, Manufacturing, Energy, Allied Industrial and Service Workers International Union (USW) filed antidumping duty (AD) petitions on Certain Aluminum Extrusions from Colombia, the Dominican Republic, Ecuador, India, Indonesia, Italy, Malaysia, Mexico, China, South Korea, Taiwan, Thailand, Turkey, the United Arab Emirates, and Vietnam, and countervailing duty (CVD) petitions on the same product from Turkey, Indonesia, Mexico, and China. The Coalition and USW allege that imports of aluminum extrusions from these countries are injuring the US domestic industry because they are sold in the United States for less than “normal value” and unfairly subsidized.
The Coalition and USW request the imposition of significant AD/CVD duties, ranging between 28.29% and 256.58%. AD/CVD duties will be imposed if the US Department of Commerce (DOC) determines that such alleged dumping and subsidization is occurring and if the US International Trade Commission (ITC) determines that there is “material injury” (or the threat thereof) by reason of the dumped and/or subsidized imports. Aluminum Die Casting Enclosure
![Antidumping and Countervailing Duty Petitions on Aluminum Extrusi](http://cdn.globalso.com/kingruncastings/Die-casting-housing-for-gear-box.png)
If the investigations are affirmative, importers of aluminum extrusions from Colombia, the Dominican Republic, Ecuador, India, Indonesia, Italy, Malaysia, Mexico, China, South Korea, Taiwan, Thailand, Turkey, the United Arab Emirates, and Vietnam will be liable for any potential AD and/or CVD duties imposed.
This petition is a follow-up to the much-litigated AD/CVD Orders on Aluminum Extrusions from China. The scope of products that would be covered by any AD/CVD duties imposed in this new case is much broader than the existing case, attempting to address major “issues” with the existing scope. For example, this scope does not include an exclusion for finished merchandise or finished kits, and includes language relating to whether subassemblies or products containing non-extruded aluminum fasteners are covered. Importantly, the Coalition and USW request that products the DOC has previously found to be excluded from the China AD/CVD orders now be subject to AD/CVD duties. Thus, importers of certain extruded aluminum heat sinks, solar panel mounting racks, shower door kits, telescoping poles, vehicle roof rails and sun/moon roof framing, solar panel racking rails and framing, tradeshow display fixtures and framing, parts for tents or clear span structures, fence posts, drapery rails or rods, electrical conduits, door thresholds, flooring trim, electric vehicle battery trays, signage or advertising poles, picture frames, and cleaning system components should pay close attention to these cases.
Per the petition, these investigations cover aluminum extrusions, regardless of form, finishing, or fabrication, whether assembled with other parts or unassembled, whether coated, painted, anodized, or thermally improved. Aluminum extrusions are shapes and forms, produced by an extrusion process, made from aluminum alloys having metallic elements corresponding to the alloy series designations published by the Aluminum Association commencing with the numbers 1, 3, and 6 (or proprietary equivalents or other certifying body equivalents). Specifically, subject aluminum extrusions made from an aluminum alloy with an Aluminum Association series designation commencing with the number 1 contain not less than 99% aluminum by weight. Subject aluminum extrusions made from an aluminum alloy with an Aluminum Association series designation commencing with the number 3 contain manganese as the major alloying element, with manganese accounting for not more than 3.0% of total materials by weight. Subject aluminum extrusions made from an aluminum alloy with an Aluminum Association series designation commencing with the number 6 contain magnesium and silicon as the major alloying elements, with magnesium accounting for at least 0.1% but not more than 2.0% of total materials by weight, and silicon accounting for at least 0.1% but not more than 3.0% of total materials by weight. The scope also includes merchandise made from an aluminum alloy with an Aluminum Association series designation commencing with the number 5 (or proprietary equivalents or other certifying body equivalents) that have a magnesium content accounting for up to but not more than 2.0% of total materials by weight.
The country of origin of the aluminum extrusion is determined by where the metal is extruded (i.e., pressed through a die).
Aluminum extrusions are produced and imported in a wide variety of shapes and forms, including, but not limited to, hollow profiles, other solid profiles, pipes, tubes, bars, and rods. Aluminum extrusions that are drawn subsequent to extrusion (drawn aluminum) are also included in the scope.
Subject aluminum extrusions are produced and imported with a variety of coatings and surface treatments, and types of fabrication. The types of coatings and treatments applied to aluminum extrusions include, but are not limited to, extrusions that are mill finished (i.e., without any coating or further finishing), brushed, buffed, polished, anodized (including brightdip), liquid painted, electroplated, chromate converted, powder coated, sublimated, wrapped, and/or bead blasted. Subject aluminum extrusions may also be fabricated, i.e., prepared for assembly, or thermally improved. Such operations would include, but are not limited to, extrusions that are cut-to-length, machined, drilled, punched, notched, bent, stretched, stretch-formed, hydroformed, knurled, swedged, mitered, chamfered, threaded, and spun. Performing such operations in third countries does not otherwise remove the merchandise from the scope of the investigation.
The types of products that meet the definition of subject merchandise include, but are not limited to, vehicle roof rails and sun/moon roof framing, solar panel racking rails and framing, tradeshow display fixtures and framing, parts for tents or clear span structures, fence posts, drapery rails or rods, electrical conduits, door thresholds, flooring trim, electric vehicle battery trays, heat sinks, signage or advertising poles, picture frames, telescoping poles, or cleaning system components. Heat sinks are included in the scope, regardless of whether the design and production of the heat sinks are organized around meeting specified thermal performance requirements and regardless of whether they have been tested to comply with such requirements.
Merchandise that is comprised solely of aluminum extrusions or aluminum extrusions and fasteners, whether assembled at the time of importation or unassembled, is covered by the scope in its entirety. The scope also covers aluminum extrusions that are imported with non-extruded aluminum components beyond fasteners, whether assembled at the time of importation or unassembled, that are designed to be a part or subassembly of a larger product or system. Only the aluminum extrusion portion of the merchandise described in this paragraph, whether assembled or unassembled, is subject to duties. Examples of merchandise that is designed to be a part or subassembly of a larger product or system include, but are not limited to, window parts or subassemblies; door unit parts or subassemblies; shower and bath system parts or subassemblies; solar panel mounting systems; fenestration system parts or subassemblies, such as curtain wall and window wall units and parts or subassemblies of storefronts; furniture parts or subassemblies; appliance parts or subassemblies, such as fin evaporator coils and systems for refrigerators; railing or deck system parts or subassemblies; fence system parts or subassemblies; motor vehicle parts or subassemblies, such as bumpers for motor vehicles; trailer parts or subassemblies, such as side walls, flooring, and roofings; electric vehicle charging station parts or subassemblies; or signage or advertising system parts or subassemblies.
The scope excludes assembled merchandise containing non-extruded aluminum components beyond fasteners that is not a part or subassembly of a larger product or system and that is used as imported, without undergoing after importation any processing, fabrication, finishing, or assembly or the addition of parts or material, regardless of whether the additional parts or material are interchangeable. Examples of such excluded assembled merchandise include windows with glass, door units with door panel and glass, motor vehicles, trailers, furniture, appliances, and solar panels.
The scope also includes aluminum extrusions that have been further processed in a third country, including, but not limited to, the finishing and fabrication processes described above, assembly (whether with other aluminum extrusion components or with non-aluminum extrusion components), or any other processing that would not otherwise remove the merchandise from the scope if performed in the country of manufacture of the in-scope product. Third-country processing, finishing, and/or fabrication, including those processes described in the scope, does not alter the country of origin of the subject aluminum extrusions.
The following aluminum extrusion products are excluded: aluminum extrusions made from an aluminum alloy with an Aluminum Association series designations commencing with the number 2 (or proprietary equivalents or other certifying body equivalents) and containing in excess of 1.5% copper by weight; aluminum extrusions made from an aluminum alloy with an Aluminum Association series designation commencing with the number 5 (or proprietary equivalents or other certifying body equivalents) and containing in excess of 2.0% magnesium by weight; and aluminum extrusions made from an aluminum alloy with an Aluminum Association series designation commencing with the number 7 (or proprietary equivalents or other certifying body equivalents) and containing in excess of 2.0% zinc by weight. The scope also excludes aluminum alloy sheet or plates produced by means other than the extrusion process, such as aluminum products produced by a method of continuous casting or rolling. Cast aluminum products are also excluded. The scope also excludes unwrought aluminum in any form.
Additionally, the scope excludes collapsible tubular containers composed of metallic elements corresponding to alloy code 1080A as designated by the Aluminum Association where the tubular container (excluding the nozzle) meets each of the following dimensional characteristics: (1) length of 37 millimeters (mm) or 62 mm, (2) outer diameter of 11.0 mm or 12.7 mm, and (3) wall thickness not exceeding 0.13 mm.
Also excluded from the scope of these investigations is certain rectangular wire, imported in bulk rolls or precut strips and produced from continuously cast rolled aluminum wire rod, which is subsequently extruded to dimension to form rectangular wire with or without rounded edges. The product is made from aluminum alloy grade 1070 or 1370, with no recycled metal content allowed. The dimensions of the wire are 2.95 mm to 6.05 mm in width, and 0.65 mm to 1.25 mm in thickness. Imports of rectangular wire are provided for under the Harmonized Tariff Schedule of the United States (HTSUS) categories 7605.19.0000, 7604.29.1090, or 7616.99.5190. Also excluded from the scope of these investigations are all products covered by the scope of the AD and CVD orders on Aluminum Extrusions from the People’s Republic of China. See Aluminum Extrusions from the People’s Republic of China: Antidumping Duty Order, 76 FR 30,650 (May 26, 2011); Aluminum Extrusions from the People’s Republic of China: Countervailing Duty Order, 76 FR 30,653 (May 26, 2011).
Although not dispositive, imports of covered aluminum extrusions may be classified under the following categories of the HTSUS:
The following are estimated key dates for these investigations, once initiated by the DOC and the ITC:
First Deadlines: ITC Preliminary Injury Phase
December 28, 2023 - CVD preliminary determination
The preliminary results deadline can be extended.
March 12, 2023 - AD preliminary determination
The preliminary results deadline can be extended.
Post Your Public Notice Today!
You are responsible for reading, understanding and agreeing to the National Law Review's (NLR’s) and the National Law Forum LLC's Terms of Use and Privacy Policy before using the National Law Review website. The National Law Review is a free to use, no-log in database of legal and business articles. The content and links on www.NatLawReview.com are intended for general information purposes only. Any legal analysis, legislative updates or other content and links should not be construed as legal or professional advice or a substitute for such advice. No attorney-client or confidential relationship is formed by the transmission of information between you and the National Law Review website or any of the law firms, attorneys or other professionals or organizations who include content on the National Law Review website. If you require legal or professional advice, kindly contact an attorney or other suitable professional advisor.
Some states have laws and ethical rules regarding solicitation and advertisement practices by attorneys and/or other professionals. The National Law Review is not a law firm nor is www.NatLawReview.com intended to be a referral service for attorneys and/or other professionals. The NLR does not wish, nor does it intend, to solicit the business of anyone or to refer anyone to an attorney or other professional. NLR does not answer legal questions nor will we refer you to an attorney or other professional if you request such information from us.
Under certain state laws the following statements may be required on this website and we have included them in order to be in full compliance with these rules. The choice of a lawyer or other professional is an important decision and should not be based solely upon advertisements. Attorney Advertising Notice: Prior results do not guarantee a similar outcome. Statement in compliance with Texas Rules of Professional Conduct. Unless otherwise noted, attorneys are not certified by the Texas Board of Legal Specialization, nor can NLR attest to the accuracy of any notation of Legal Specialization or other Professional Credentials.
The National Law Review - National Law Forum LLC 2020 Green Bay Rd., Suite 178, Highland Park, IL 60035 Telephone (708) 357-3317 or toll free (877) 357-3317. If you would ike to contact us via email please click here.
![Antidumping and Countervailing Duty Petitions on Aluminum Extrusi](http://cdn.globalso.com/kingruncastings/Die-casting-MC-housings-of-packet-microwave-radios1.png)
Aluminium Die Casting Mold Copyright ©2024 National Law Forum, LLC