Home House & Components Parts of House Drywall
Can drywall anchors really be trusted to bear their rated weight? We conducted a HomeLAB test to find out. Different Types Of Hex Nuts
Our editors and experts handpick every product we feature. We may earn a commission from your purchases.
W hen you need to hang something in a spot without a stud, drywall anchors are the way to go. But how much weight can drywall anchors hold? We were skeptical. So we picked up some drywall anchors at a local home center and a few others online to subject them to a stress test. Here’s what we found.
We installed each anchor in one-half in. drywall, following the manufacturer’s instructions. Then we hung a tension scale from the anchor and fastened it to a hook screwed into a 2×4 fastened to the wall studs. We slowly twisted the turnbuckle and watched as the tension increased until the anchor buckled. Here’s how we tested each drywall anchor:
Tension scale: When tension is applied, this scale measures weight in pounds.
Turnbuckle: Turning increases the tension on the scale, providing a weight reading.
Hold-down: A 2×4 screwed to studs provides a solid base.
Check out this compilation of tips for working with drywall to make your next build or repair easier.
All the anchors we tested lived up to the claims, and all but one exceeded their weight rating.
Given the modest claim, we didn’t expect much from these, but we were amazed by their strength.
This heavier-duty anchor snaps into place when the screw is installed, but it performed about the same as the Everbilt Ribbed.
This anchor clips to the back of the drywall and creates a tight bond. In our test, it held more than twice its rated weight.
The E-Z Ancor is a great multipurpose choice. They’re widely available, inexpensive and easy to install (no need to drill a hole).
This anchor held strong at 180 lbs., and we couldn’t turn the turnbuckle any more. They’re overkill for most projects, but sometimes the job calls for maximum strength.
This anchor screws into drywall. Then, as you drive in a screw, a metal arm tightens against the back of the drywall.
Easy to install with no drilling required (use a hammer), this stays true to its weight rating. But once over that, several popped right out of the drywall, leaving a big hole.
We are no longer supporting IE (Internet Explorer) as we strive to provide site experiences for browsers that support new web standards and security practices.
FLANGE NUT We recommend our users to update the browser.