Li, R. et al. Simulation of residual stress and distortion evolution in dual-robot collaborative wire-arc additive manufactured Al-Cu alloys. Virtual Phy. Prototy. 19(1), e2409390. https://doi.org/10.1080/17452759.2024.2409390 (2024).
Ji, R. et al. Study on high wear resistance surface texture of electrical discharge machining based on a new water-in-oil working fluid. Tribol. Int. 180, 108218. https://doi.org/10.1016/j.triboint.2023.108218 (2023). edm service
Zhang, Z. et al. Analysis and optimization of process energy consumption and environmental impact in electrical discharge machining of titanium superalloys. J. Clean. Prod. 198, 833–846 (2018).
Ming, W. et al. Comparative study of energy efficiency and environmental impact in magnetic field assisted and conventional electrical discharge machining. J. Clean. Prod. 214, 12–28 (2019).
Wu, X. et al. Sustainable and high-efficiency green electrical discharge machining milling method. J. Clean. Prod. 274, 123040 (2020).
Ming, W. et al. Green machining: A framework for optimization of cutting parameters to minimize energy consumption and exhaust emissions during electrical discharge machining of Al 6061 and SKD 11. J. Clean. Prod. 285, 124889 (2021).
Shastri, R. K. & Mohanty, C. P. Sustainable electrical discharge machining of nimonic C263 superalloy. Arab. J. Sci. Eng. 46(8), 7273–7293 (2021).
Nieslony, P. et al. Relationship between energy consumption and surface integrity aspects in electrical discharge machining of hot work die steel. Sustain. Mater. Technol. 36, e00623 (2023).
Rao, K. V., Kumar, Y. P. & Shaik, F. Measurement and optimization of power consumption and aerosol emissions in magnetic field-assisted electrical discharge machining of Inconel 718. Soft Comput. 27(16), 11451–11468 (2023).
Zaragoza-Granados, J. et al. Erosion behaviour of AISI 310 stainless steel at 450 °C under turbulent swirling impinging jets. Wear 426–427, 637–642 (2019).
Yaqoob, S. et al. A review of sustainable hybrid lubrication (Cryo-MQL) techniques in machining processes. Int. J. Adv. Manuf. Technol. 131(1), 151–169 (2024).
Statista. Distribution of electricity generation in Pakistan in 2022, by source. 2023 26 July 2023]; Available from: https://www.statista.com/statistics/1237548/pakistan-distribution-of-electricity-production-by-source/#:~:text=Natural%20gas%20is%20the%20most,of%20power%20production%20that%20year.
Wassie, Y. T. & Adaramola, M. S. Socio-economic and environmental impacts of rural electrification with solar photovoltaic systems: Evidence from southern Ethiopia. Energy Sustain. Dev. 60, 52–66 (2021).
Chau, C. K., Leung, T. M. & Ng, W. Y. A review on life cycle assessment, life cycle energy assessment and life cycle carbon emissions assessment on buildings. Appl. Energy 143, 395–413 (2015).
Li, J. et al. Task incremental learning-driven Digital-Twin predictive modeling for customized metal forming product manufacturing process. Robot. Comput. Integr. Manuf. 85, 102647. https://doi.org/10.1016/j.rcim.2023.102647 (2024).
Long, X., Lu, C., Su, Y. & Dai, Y. Machine learning framework for predicting the low cycle fatigue life of lead-free solders. Eng. Fail. Anal. 148, 107228. https://doi.org/10.1016/j.engfailanal.2023.107228 (2023).
The authors appreciate the support from Researchers Supporting Project number (RSPD2024R702), King Saud University, Riyadh, Saudi Arabia.
Department of Mechanical Engineering, University of Engineering and Technology, Taxila, 47080, Pakistan
Abdul hanan feat shahid mehmood
Department of Industrial and Manufacturing Engineering, Faculty of Mechanical Engineering, University of Engineering and Technology, Lahore, 54890, Pakistan
Department of Data and Systems Engineering, The University of Hong Kong, Pok Fu Lam, Hong Kong
The Sargent Centre for Process Systems Engineering, University College London, Torrington Place, London, WC1E 7JE, UK
Industrial Engineering Department, College of Engineering, King Saud University, 11421, Riyadh, Saudi Arabia
Department of Mechanical Engineering, Landmark University, Omu-aran, Kwara State, Nigeria
Department of Mechanical Engineering Science, University of Johannesburg, Johannesburg, South Africa
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
Abdul Hannan: Conceptualization, Data curation, Formal analysis, Investigation, Writing-review & editing. Shahid Mehmood: Supervision, Formal analysis, Resources, Project Administration. Muhammad Asad Ali: Conceptualization, Methodology, Formal analysis, Writing-original draft, Writing-review & editing. Muhammad Huzaifa Raza: Methodology, Formal analysis, Validation, Writing-original draft, Writing-review & editing. Muhammad Umar Farooq: Conceptualization, Writing-original draft, Writing-review & editing. Saqib Anwar: Formal analysis, Validation, Writing-review & editing. Adeolu A Adediran: Formal analysis, Writing-review & editing.
Correspondence to Muhammad Umar Farooq or Adeolu A. adediran.
The authors declare no competing interests.
All authors agreed upon the current version of submission for publication.
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Open Access This article is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License, which permits any non-commercial use, sharing, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if you modified the licensed material. You do not have permission under this licence to share adapted material derived from this article or parts of it. The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by-nc-nd/4.0/.
Hannan, A., Mehmood, S., Ali, M.A. et al. Machining performance, economic and environmental analyses and multi-criteria optimization of electric discharge machining for SS310 alloy. Sci Rep 14, 28930 (2024). https://doi.org/10.1038/s41598-024-79338-7
DOI: https://doi.org/10.1038/s41598-024-79338-7
Anyone you share the following link with will be able to read this content:
Sorry, a shareable link is not currently available for this article.
Provided by the Springer Nature SharedIt content-sharing initiative
Scientific Reports (Sci Rep) ISSN 2045-2322 (online)
high performance cut 1000 500 Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.