Ad-free. Influence-free. Powered by consumers.
The payment for your account couldn't be processed or you've canceled your account with us. Mini Circuit Breaker
We don’t recognize that sign in. Your username maybe be your email address. Passwords are 6-20 characters with at least one number and letter.
We still don’t recognize that sign in. Retrieve your username. Reset your password.
Forgot your username or password?
Don’t have an account?
Save products you love, products you own and much more!
Which Car Brands Make the Best Vehicles?
The Cost of Car Ownership Over Time
Listen to the Talking Cars Podcast
Best DIY Home Security Systems
What to Do With a Broken Appliance
Cheapest Printers for Ink Costs
Find the Right Phone for You
Plus an alternative that could save you hundreds of dollars
When you shop through retailer links on our site, we may earn affiliate commissions. 100% of the fees we collect are used to support our nonprofit mission. Learn more.
Sales of portable generators tend to spike around major storms. But getting a portable generator up and running in a hurry often means bypassing the recommended installation procedure and making do with extension cords.
That’s why it’s best to shop for a generator before you really need one. It gives you time to get familiar with the model, stock up on gasoline, and more to the point, hire an electrician to install a transfer switch—a device that allows you to use your generator to power entire circuits in your house—without the hassle and potential dangers of relying on extension cords.
“It’s not only less safe to run a generator without a transfer switch, but you limit the devices your generator can power,” says Dave Trezza, who performs generator testing at Consumer Reports. “A transfer switch will let you power things on your circuit breaker panel, including hardwired appliances like a water heater or well pump.”
If you have a mid-sized or larger portable generator rated for 5,000 watts or more, you can connect it to your home’s circuit breaker panel with a transfer switch—a small board that looks a bit like a circuit breaker panel itself. (Smaller generators generally lack a 220V outlet to connect the power cord to the transfer switch.)
The advantage of home standby generators? They have a built-in transfer switch that automatically springs on when the power goes off.
Think of a transfer switch as a miniature circuit breaker panel that draws electricity from your generator instead of the power company. When electric service is out in your area, you can plug your portable generator into an outdoor outlet that’s connected, through the house, to a transfer switch inside.
The switch itself is installed by an electrician, usually alongside your main circuit breaker panel. The electrician can help you figure out which circuits you want to power during an outage. Heating and cooling equipment are essential, as are water heaters and well pumps.
Without this switch installed, you need to run outdoor-rated extension cords from your generator into the house. And yes, multiple cords: Because extension cords can be overloaded, you need a dedicated cord for anything that draws a lot of power, like a space heater or window air conditioner.
Keep in mind, too, that without a transfer switch, you can power only electronics that have a standard plug. You won’t be able to connect anything that’s hardwired to your circuit panel, like a furnace or an air conditioner compressor.
You’re also out of luck if you have an electric range or dryer, because both use large, 220-volt, four-prong plugs. A transfer switch allows you to power any of those items—while skipping the extension cords.
While a transfer switch boasts both safety and convenience, it comes at a cost. Budget between $500 and $1,500 for the switch, including installation, which usually takes less than a day.
And plan early—even if you already have a generator, it can be hard to find an electrician for this kind of a job when there’s a big storm in the forecast.
There’s also a less expensive alternative to a transfer switch, called an interlock device. The idea is similar: When the power goes out, you plug your generator into the same outdoor outlet. But rather than connecting to a transfer switch, the outdoor outlet connects directly to your existing circuit panel.
Think of the device as a metal bracket installed on the panel. When in place, the interlock covers the main cutoff switch, so you can’t turn it on while the generator is running. Once utility power is back, you slide the interlock back to its original position. Thus, power flows in only one direction.
An electrician can tell you whether an interlock will work with your electrical system and whether it meets local building codes. You’ll have to pay $50 to $150 for the kit, plus $400 to $800 for labor, which is significantly less than you’d pay for a transfer switch.
Technically, you can connect a generator to your circuit panel without an interlock, but it’s dangerous and, in many cases, illegal. CR never recommends this approach for two reasons.
First, if you’re powering your house with a generator and the power comes back on from the street, you can overload the wiring and fry your electronics.
Second, if you’re running a generator to your panel without an interlock device, you can send electricity back into power lines as utility crews are working on them, potentially exposing essential workers to an electrocution risk.
To reduce the risk of carbon monoxide poisoning, some new generators feature a built-in sensor that triggers an automatic shutoff if the CO in an enclosed space builds up to dangerous levels; some models emit less CO in the first place. Test data from CR shows that these safety features are likely to save lives.
Portable generators have to pass our CO Safety Technology test before CR recommends them. But our findings reveal potentially life-threatening gaps that the automatic shutoff fails to address, reinforcing why it’s critical for consumers to follow safety guidelines.
How to prepare your home before a storm.
Paul Hope is a senior multimedia content creator at Consumer Reports and a trained chef. He covers ranges, cooktops, and wall ovens, as well as grills, drills, outdoor power tools, decking, and wood stains. Before joining CR in 2016, he tested kitchen products at Good Housekeeping and covered tools and remodeling for This Old House magazine. You’ll typically find him in his old fixer-upper, engrossed in a DIY project or trying out a new recipe.
Allen St. John is a senior tech editor at Consumer Reports. He has been with CR since 2016, focusing on digital privacy and covering smartwatches, wireless speakers, and headphones. Previously, Allen was a senior editor at Condé Nast and a contributing editor at publications ranging from Road & Track to the Village Voice, and his work has appeared in the New York Times Magazine, the Wall Street Journal, Rolling Stone, and other national outlets. He is a New York Times bestselling author, and lives in Montclair, N.J., with his wife and his dog, Rugby.
We respect your privacy. All email addresses you provide will be used just for sending this story.
Why a Portable Generator Needs a Transfer Switch to Safely Power Your Whole House
Portable vs. Standby Generator: Which Is Right for Your Home?
Gas Push Button Ignition Switch How to Safely Set Up a Generator Fast