Image Credit: SvedOliver/Shutterstock.com
You’ll often experience a forward shift in the weight of a car during hard braking. Without a proportioning valve sensor, the shift in weight that unloads the rear axle can cause the rear car wheels to lock, potentially spinning the vehicle out of control. auto parts catalog
So, when braking, it is obvious that the driver will be exerting a proportional amount of pressure to the braking system to stop the car. This applied pressure is controlled by a proportioning valve, which works to control the actual pressure applied to the rear brakes.
The idea of an internal car component being able to balance the front and rear pressure to a moving vehicle was introduced in the late 1960s. Early designs of a standard proportioning valve, including disc and drum brakes, are still used in some modern automobiles.
The proportioning valve operation was designed to be specific to front disc, rear drum components. Later car designs with four-wheel disc brakes have been introduced with proportioning valves for each of the rear disc brakes.
Automotive design and engineering will continue to work on creating the most efficient braking system where there is a balance in the friction coefficient between all four tires to a vehicle. With the imbalance in the front and rear wheel pressure is the reason for using a proportional valve, this component still only serves as one way to adjust the balance.
The disc front and drum rear is the main combination that will benefit from a proportioning valve. It is worth noting that disc brakes fixed to the front of a vehicle can achieve around 70% of the stopping force without overheating. Drum brakes have less directional stability, so with lighter vehicles, there is less of a difference between the disc rears and drum rears.
A standard proportioning valve system is part of a large combustion valve structure that can be sectioned into three individual parts: the metering valve, the pressure differential valve, and the proportioning valve. Each section is bridged by a master cylinder.
There is an inlet passage from the master cylinder at one side of the valve and a rear brake passage protruding at the opposite end of the positioning valve. A proportioning piston sits in a stepped bore inside the valve, and the stepped bore is also connected to a valve stem. It is the valve stem that carries out the proportioning to a braking system – the stem moves inside the bore via the spring-loaded piston (see video below to understand the structural components of a proportioning combination valve for braking systems, its functions, use, and importance).
The following video animates the internal structure of a positioning valve and how this works to help introduce proportioning valve operation in a car brake system.
By adjusting the braking force, the positioning system can allow the vehicle to control the load transfer. During regular braking in a moving vehicle, the spring-loaded piston is normally in a relaxed position. The poppet valve to this system is held in position with a spring which allows the fluid to travel through the main valve into the rear car brake system.
Now, imagine slamming on your brakes to stop the car immediately in its tracks – the pressure applied to allow for heavy braking causes the outlet pressure to rise in the positioning valve, which creates an imbalance in the force between the two areas of the spring-loaded piston and moves the piston against a pressure spring. This movement of the piston against the pressure spring limits the amount of pressure delivered to the rear brakes by closing the valve stem. Thus, more pressure is applied to the front disc brakes and less pressure is applied to the drum brakes.
Car manufacturers will continue to make vehicle braking systems safer and more efficient. BMW has tested the active hazard braking concept to explore ways to avoid rear-end collisions. The research team has tested the use of a proximity warning system that can preload the brakes and activate these brakes as an alert to a possible collision in their new research prototype (see video). This new initiative demonstrates how car manufacturers are looking for ways to integrate the brake system with additional safety components in a vehicle.
This article was updated on 13th February, 2020.
Do you have a review, update or anything you would like to add to this article?
Matt Styf and Kyle Rudge
In this interview, Matt Styf and Kyle Rudge from Sensata Technologies discuss the latest innovations in battery management systems, fast disconnect devices, and emerging trends in the electrification and automotive industries.
In this interview, AZoSensors speaks to Merit Sensor's Rick E. Russel about the critical role MEMS pressure sensors will play in water conservation efforts.
In this interview, Beontag CEO discusses RFID's role in IoT, enhancing supply chain efficiency, sustainability, and data security for diverse industries.
Discover the Thermometrics A-2130 Inrush Current Limiter Kit, featuring 32 popular styles with 5 pieces each.
The NovaSensor NPA Series offers versatile surface-mount pressure sensors in a compact SOIC14 package, ideal for PCB mounting and various applications.
The CM-200 Gas Sensor Development Kit is a PCB developed to help customers go from concept to product as quickly as possible.
Your AI Powered Scientific Assistant
Hi, I'm Azthena, you can trust me to find commercial scientific answers from AZoNetwork.com.
To start a conversation, please log into your AZoProfile account first, or create a new account.
Registered members can chat with Azthena, request quotations, download pdf's, brochures and subscribe to our related newsletter content.
A few things you need to know before we start. Please read and accept to continue.
Please check the box above to proceed.
Azthena may occasionally provide inaccurate responses. Read the full terms.
While we only use edited and approved content for Azthena answers, it may on occasions provide incorrect responses. Please confirm any data provided with the related suppliers or authors. We do not provide medical advice, if you search for medical information you must always consult a medical professional before acting on any information provided.
Your questions, but not your email details will be shared with OpenAI and retained for 30 days in accordance with their privacy principles.
Please do not ask questions that use sensitive or confidential information.
Read the full Terms & Conditions.
AZoSensors.com - An AZoNetwork Site
vehicle parts name Owned and operated by AZoNetwork, © 2000-2025