In Tesla software update 2024.32 and onwards, Tesla has made a big—and unexpected—change to how its vehicles handle power sockets. This change impacts every vehicle except the Cybertruck, where you can already adjust how power sockets are handled on a case-by-case basis.
This change to the power sockets means that in 2024.32, Tesla vehicles will have their 12v sockets and USB ports turned off while in Sentry Mode. Previously, while the car was awake or Sentry Mode was active, the 12v sockets in the rear of the vehicle and any of the USB ports would all remain powered. motorcycle usb charger
Now, owners will no longer be able to operate devices that rely on these ports once the vehicle falls asleep. This change renders some accessories almost useless, such as vehicle fridges. Owners previously relied on Sentry Mode coming on when their vehicle was parked, which kept the fridge in the vehicle’s sub-trunk powered. This change will also prevent owners from using Sentry Mode to keep USB ports powered to charge laptops and other devices.
Until further changes are made, owners will have to use Camp Mode to keep 12v sockets and USB ports powered. However, Camp Mode leaves the vehicle unlocked, making it insecure and unsuitable for things like sub-trunk fridges.
Tesla may be planning to integrate the Outlets & Accessories menu from the Cybertruck into the rest of its vehicles. The outlets menu in the Cybertruck allows you to keep the cabin (and bed) outlets in the vehicle active, even when the vehicle isn’t in use. These outlets remain powered for up to 12 hours after the Cybertruck is exited.
Drew Baglino, Tesla’s now former SVP of powertrains and energy, said back in February of this year that Tesla was looking at reducing the amount of power that Sentry Mode used. He stated that Sentry Mode power consumption needs to be improved and that the team was working on an update to reduce power by about 40%. According to Baglino, the improvements were expected to come in the second quarter of this year, but it’s not clear if this change in update 2024.32 is part of those changes that will lower Sentry Mode’s power consumption.
Even if these are planned changes, we hope Tesla makes them optional, and lets owners choose when to keep outlets powered and when to conserve energy.
Update: Tesla service has now responded to some users regarding this issue. A Tesla service rep says that Tesla is receiving a lot of feedback regarding this change, meaning that this isn’t simply a bug. However, it’s still not clear whether this change was made to improve power consumption while Sentry Mode is enabled, whether it’s to reduce wear on the low-voltage battery which powers the 12v power sockets and USB ports, or if i’s due to an entirely different reason.
Hopefully, we’ll hear something officially from Tesla soon.
Subscribe to our newsletter to stay up to date on the latest Tesla news, upcoming features and software updates.
As part of an update to its AI roadmap, Tesla has also announced the features that will be in FSD v13. Tesla provided many details about what we can expect, and there’s a lot of info to break down.
Tesla’s VP of AI, Ashok Elluswamy, also revealed that FSD v13 is expected to make FSD Unsupervised feature complete. That doesn’t mean that autonomy will be ready, as each feature will still need to work at safety levels higher than a human, but it means every key feature of autonomous vehicles will be present in FSD v13.
Let’s examine the v13 feature list Tesla and Tesla employees have recently provided to see exactly what’s coming.
FSD v12 has been trained using Tesla’s HW3 cameras and downsampling the AI4 cameras to match. For the first time, Tesla will use AI4's native camera resolution to get the clearest image possible. Not only will Tesla increase the resolution, but they’re also increasing the capture rate to 36 FPS (frames per second). This should result in extreme smoothness and the ability of the vehicle to detect objects earlier and more precisely. It’ll be a big boon for FSD, but it’ll come at the price of processing all of this additional information.
The HW3 cameras have a resolution of about 1.2 megapixels, while the AI4 cameras have a resolution of 5.44 megapixels. That’s a 4.5x improvement in raw resolution - which is a lot of new data for the inference computer and AI models to deal with.
Yun-Ti Tsai, Senior Staff Engineer at Tesla AI, mentioned on X that the total data bandwidth is 1.3 gigapixels per second, running at 36 hertz, with nearly 0 latency between capture and inference. This is one of the baseline features for getting v13 off the ground, and through this feature update, we can expect better vehicle performance, sign reading, and lots of little upgrades.
The next big item is that Tesla will increase the size of the FSD model by three times and the overall context length by the same amount. What that means, in simple terms, is that FSD will have a lot more information to draw upon—both at the moment (the context length) and from background knowledge and training (model size).
In layman’s terms, Tesla has made the FSD brain bigger and increased the amount of information it can remember. This means that FSD will have a lot more data to work with when making decisions, both from what's happening right now and from what it has learned in the past.
Beyond that, Tesla has also massively expanded the data scaling and training compute to match. Tesla is increasing the amount of training data by 4.2 times and increasing their training commute power by 5x.
Video of the inside of Cortex today, the giant new AI training supercluster being built at Tesla HQ in Austin to solve real-world AI pic.twitter.com/DwJVUWUrb5
Tesla’s FSD has famously only relied upon visual data—equivalent to what humans can access. LiDAR hasn’t been on Tesla’s books except for model validation, and radar, while used in the past, was mostly phased out.
Now, Tesla AI will integrate audio intake into FSD’s models, with a focus on better handling of emergency vehicles. FSD will soon be able to react to emergency vehicles, even before it sees them. This is big news and is in line with how Tesla has been approaching FSD—through a very human-like lens.
We’re excited to see how these updates pan out - but there was one more thing. Ashok Elluswamy, VP of AI at Tesla, confirmed on X that they’ll add the ability for FSD to honk the horn.
The other improvements, while major, can be summarized pretty simply. Tesla is focusing on improving smoothness and safety in various ways. The v13 AI will be trained to predict and adapt for collision avoidance, navigation, and better following traffic controls. This will make it more predictable for users and other drivers and improve general safety.
Beyond that, Tesla is also working on a better representation of the map and navigation inputs versus what FSD actually does. In complex situations, FSD may choose to take a different turn or exit, even if navigation is telling it to go the other way. This future update will likely close this gap and ensure that your route and FSD’s path planner match closely.
Of course, Tesla will also be working on adding Unpark, Reverse, and Park capabilities, as well as support for destination options, including parking in a spot, driveway, or garage or just pulling over at a specific point, like at an entrance.
Finally, they’re also working on adding improved camera self-cleaning and better handling of camera occlusion. Currently, FSD can and will clean the front cameras if they are obscured with debris, but only if they are fully blocked. Partial blockages do not trigger the wipers. Additionally, when the B-Pillar cameras are blinded by sunlight, FSD tends to have difficulties staying centered in the lane. This specific update is expected to address both of these issues.
Tesla announced that FSD v13 will be released to employees this week, however, it’ll take various iterations before it’s released to the public. Tesla mentioned that they expect FSD v13 to be released to customers around v13.3, but surprisingly, they state that this will happen around the Thanksgiving timeframe — just a few weeks away.
Tesla is known for delays with its FSD releases, so we’re cautious about the late November timeline. However, the real takeaway is that FSD v13 is expected to offer a substantial leap in capability over the next few months—even if it’s exclusive to AI4.
As part of a recent update to the Tesla App, Tesla has added some slick new user interfaces to the Service and Roadside sections of the app. These new interfaces allow you to easily select the areas that are damaged or need attention.
These new screens in the service and roadside menus have been available in North America since at least late August, but appear to be rolling out to more users.
For now, it also appears to be restricted to the Model 3 (both original and 2024 Highland refresh), as well as the Model Y. The Model S and X, both redesigned or legacy - do not appear to have this new service menu just yet. The Cybertruck is the same - no unique service menu for it just yet, either.
In order to see this new screen, you can open up your Model 3 or Model Y’s service menu in the Tesla app. From there, you can select “Exterior” as the area of concern. Once there, you’ll be greeted with a short tutorial that will show you through the new interface.
Instead of having to type your areas of concern which could be ambiguous, this new interface makes it easy to select the affected areas. Just swipe left/right to view the car from different angles and tap the area that needs service.
Areas you select become highlighted in blue, and once you’re done selecting all of them, you can provide notes to each particular area. You can even select areas under the vehicle, like the front aero shield or center skid plate.
While most glass is selectable here, the windshield and top glass areas are a separate option in the service menu under Collision and Glass > Glass & Windows. However, windshield wipers in the second last visualization - Top.
Similar to the Exterior and Glass screens, you can open the service menu and then select Tires & Wheels as your area of concern. You’ll have two sets of options here.
You can either go to Wheels > Wheel Damage; or Tires > Replacement Tires. Here, you’ll be able to identify specific wheels or tires for service as required.
The app's roadside section offers a similar tire view, which lets you select which tire is flat.
Thanks to its app and mobile service, Tesla has been providing one of the best service experiences in the industry. While they still have work to do regarding part availability and reasonable wait times, their technology and simplicity continue to impress. We’re excited to see what improvements they’ll make next.
See all the features included in Tesla's latest update, version 2024.44.
As part of an update to its AI roadmap, Tesla has also announced the features that will be in FSD v13. Tesla provided ma…
As part of a recent update to the Tesla App, Tesla has added some slick new user interfaces to the Service and Roadside …
Tesla and Uber are partnering to offer a new discount for Uber drivers. The offer is similar to one that was offered ea…
Tesla has released updated specifications and a revised timeline for the Cybertruck’s Range Extender. Originally launc…
Tesla recently released their next update, version 2024.44, to employees. While the update hasn’t passed employee test…
Tesla has a few more tricks hidden in the Tesla 2023.26 update. This update has already introduced us to several impr…
Take a look at features that Elon Musk has said will be coming soon.
Teslas have the ability to send and receive text messages. Any message you receive while connected to the car will disp…
Tesla has supported voice commands for a number of years now. With over 100 voice commands available, Tesla drivers c…
The user interface of Tesla vehicles includes an "About Your Tesla" menu which is accessed by tapping on the Tesla "T" i…
Tesla has released updated specifications and a revised timeline for the Cybertruck’s Range Extender. Originally launc…
Tesla recently released their next update, version 2024.44, to employees. While the update hasn’t passed employee test…
According to a recent NHTSA filing of which vehicles contain the most North American parts, Tesla’s vehicles are, unsu…
A third-party company called Teslogic, which previously built dashboard kits for Tesla vehicles has launched a Kickstart…
Last month Tesla shared a roadmap with its progress on FSD and its goals for the coming months. Since we’re coming to …
LiveOne, previously known as Slacker Radio (or “Streaming” in your Tesla), has officially launched its Tesla exclusi…
Tesla update 2024.38 has started rolling out to several regions and vehicles. Thanks to Tesla hacker Greentheonly, we ha…
It’s been a while since we saw the last batch of leaked images of the Model Y Juniper refresh. That inspiring photo, a…
See all the features included in Tesla's latest update, version 2024.44.
Take a look at features that Elon Musk has said will be coming soon.
socket usb Subscribe to our weekly newsletter