Pferd Inc. has introduced Cast Cut carbide burs for work on cast iron. They provide a high stock removal rate with smooth milling action to help reduce vibration and noise. According to the company, the tooth geometry results in removal rates up to 100 percent higher than those achieved by conventional, double-cut burs.
The burs are optimized for coarse stock removal on all types of black, gray, and white cast iron. With a cutting speed of 1,500 to 2,500 SFPM (rotational speed of 12,000 to 20,000 RPM), the burs cut large chips and provide good chip removal. Five standard SCTI shapes are available with a shank diameter of ¼ in. Face Milling Inserts
The Fabricator is North America's leading magazine for the metal forming and fabricating industry. The magazine delivers the news, technical articles, and case histories that enable fabricators to do their jobs more efficiently. The Fabricator has served the industry since 1970.
Easily access valuable industry resources now with full access to the digital edition of The Fabricator.
Easily access valuable industry resources now with full access to the digital edition of The Welder.
Easily access valuable industry resources now with full access to the digital edition of The Tube and Pipe Journal.
Easily access valuable industry resources now with full access to the digital edition of The Fabricator en Español.
In this inaugural episode of The Next-Gen Metal Fab Podcast, Tim Heston and Caleb Chamberlain discuss the future...
© 2024 FMA Communications, Inc. All rights reserved.
China Drill and Drill Bit Not yet registered? Sign up