NASA's Jet Propulsion Laboratory, Pasadena, California
A miniature scanning electron microscope (SEM) with a capability for x-ray microanalysis has been proposed. This SEM would be particularly suitable for analyzing samples of dust, soil, drill tailings, and other finely divided solids collected in various environments. Designed for use in the robotic exploration of remote planets, asteroids, and comets, this instrument could also be used on Earth, where it could be operated in the field as well as in the laboratory. Thin Film Coating By Physical Vapour Deposition
The miniature SEM (see figure) would include an electron-beam column comprising a highly integrated assembly of electrostatic electron optics; as a result, this electron-beam column would be much smaller and less complex, in comparison with the electromagnetic-optics-based electron-beam column of a conventional laboratory SEM. An electrostatic deflection system in the column would be used to raster-scan the electron beam across a sample.
A coaxial microchannel plate would be used to detect secondary and back-scattered electrons. A small, highly pure, deeply depleted silicon detector, with sensitivity from <1 to >10 keV, would be used to analyze the electron-beam-induced x- rays emitted by the sample, for identification of chemical elements in the sample. The field of view of the SEM would measure about 100 by 100 µm, and the spatial resolution would be about 10 nm.
The vacuum needed in the interior volume of the electron-beam column and sample chamber would be provided by a dedicated vacuum system comprising a small sputter ion pump and roughing pump. Samples would be brought into the chamber by a sample-acquisition system that would include (1) a rod equipped with O-ring vacuum seals near its outer end and with detents on its side to hold samples and (2) drive assemblies that would rotate and translate the rod. A typical sample-acquisition sequence would begin with extension of the rod to expose the detents. Sample material would be dropped into upward-facing detents, optionally with the help of a spill tray containing holes to guide the samples into the detents.
The rod would then be retracted to bring the sample-filled detents into the chamber. The rod could be further translated and rotated to bring a desired sample or part of a sample into registration with the electron-beam column. To prevent sample material from fouling the O-ring vacuum seals, small brushes would remove any sample material protruding from the detents and the rod would be made slightly narrower in the detent region than in the vacuum-sealing outer region. Once the samples had been analyzed, the rod would be extended, then rotated to dump the samples from the detents and to bring a set of empty detents to the top to receive the next set of samples.
This work was done by John L. Callas of Caltech for NASA's Jet Propulsion Laboratory. NPO-20499
(reference NPO20499) is currently available for download from the TSP library.
Don't have an account? Sign up here.
This article first appeared in the November, 1999 issue of Photonics Tech Briefs Magazine.
Read more articles from the archives here.
A Breakthrough in Fast-Charging Lithium-Sulfur Batteries
Humanoid Robots: The Next-Generation Robotic Workforce
All-Liquid Iron Flow Battery Is Safe, Economical
The First High-Resolution, 3D-Printed Brain
A New Process for Turning CO2 into Sustainable Fuel
Giving Household Robots Common Sense
Testing New Unmanned Aircraft Technologies
100% Cloud CAD - The Future of Design Is Now
Virtual Twin as an Accelerator of ADAS and AD Development
Innovating Aircraft Interiors: How to Decrease Weight and Optimize Parts Production
Accelerated SDV Development: Virtual Prototypes of Vehicle Super-Integration Processors
Handling Unexpected Biocompatibility Test Results in Medical Device Development
My Opinion: Energy Storage, Part 2
Creating Synthetic Cell Images for Enhanced Microscopy Analysis
Answering Your Questions: Lithium-Air Battery vs. Lithium-Ion
How Much Do You Know About Programmable DC Power Supplies?
Comparison Between Wave Soldering and Reflow Soldering
Printed Electronics: The Future Is Flexible
How Much Do You Know About Fiber Optics?
Polycarbonate Seen As Top Choice for LED Lighting
Mapping Gravity with Motion Control
The Modern Industrial Workhorse: PID Controllers
The Basics of Encoder Selection
Researchers Demonstrate Cutting-Edge Chip Technology for Ultra-Low Power AI...
Smart Sensor Technology for the IoT
Networking the IoT with IEEE 802.15.4/6LoWPAN
Opening Up the Potential of Thin-Film Electronics for Flexible Chip Design
Laser Beam vs. Electron Beam Welding Which process works best for what?
Jet-Propelled Sea Creatures Could Improve Ocean Robotics
Mechanical Carbon Materials for Aircraft Seal Applications
Brushless Motors for In-Tank Fuel Pumps
How Helios Horizon Is Taking Electric Aircraft to New Altitudes
3 eVTOL Companies to Watch in 2024: Archer Aviation, Joby Aviation, and Lilium
The Future of eVTOL Battery Technology
By submitting your personal information, you agree that SAE Media Group and carefully selected industry sponsors of this content may contact you and that you have read and agree to the Privacy Policy.
You may reach us at privacy@saemediagroup.com.
You may unsubscribe at any time.
Argon Sputtering © 2009-2024 SAE Media Group