Guided by machine learning, chemists at the Department of Energy’s Oak Ridge National Laboratory designed a record-setting carbonaceous supercapacitor material that stores four times more energy than the best commercial material. A supercapacitor made with the new material could store more energy — improving regenerative brakes, power electronics and auxiliary power supplies.
Chemist Tao Wang of ORNL and the University of Tennessee, Knoxville, led the study, published in Nature Communications, along with chemist Sheng Dai of ORNL and UTK. Ceramic Capacitor Voltage
“This is the highest recorded storage capacitance for porous carbon,” said Dai, who conceived and designed the experiments with Wang.
The researchers conducted the study at the Fluid Interface Reactions, Structures and Transport Center, or FIRST, an ORNL-led DOE Energy Frontier Research Center, which operated from 2009 to 2022. Its partners at three national labs and seven universities explored fluid-solid interface reactions having consequences for capacitive electrical energy storage.
When it comes to energy storage devices, batteries are the most familiar. They convert chemical energy to electrical energy. By contrast, capacitors store energy as an electric field. They cannot store as much energy as batteries in a given volume, but they can recharge repeatedly and do not lose the ability to hold a charge. Supercapacitors can store more charge than normal capacitors and charge and discharge more quickly than batteries.
Commercial supercapacitors have two electrodes — an anode and cathode — that are separated and immersed in an electrolyte. The materials of choice for making electrodes for supercapacitors are porous carbons because the pores provide a large surface area for storing the electrostatic charge.
The ORNL-led study used machine learning to guide the discovery of the material. Runtong Pan, Musen Zhou, and Jianzhong Wu from the University of California, Riverside, a FIRST partner university, built an artificial neural network model and trained it to set a clear goal: develop a “dream material” for energy delivery.
The model predicted that the highest capacitance for a carbon electrode would be 570 farads per gram if the carbon were co-doped with oxygen and nitrogen.
Wang and Dai designed an extremely porous doped carbon that would provide huge surface areas for interfacial electrochemical reactions. Then Wang synthesized the novel material, an oxygen-rich carbon framework for storing and transporting charge.
The carbon was activated to generate more pores and add functional chemical groups at sites for oxidation or reduction reactions. Industry uses activation agents such as potassium hydroxide that require a very high temperature, around 800 °C, which drives oxygen from the material. Five years ago, Dai developed a process using sodium amide as the activation agent that works at a lower temperature, near 600 °C, and creates more active sites than the hotter industrial process. “Material synthesis in this ‘Goldilocks zone’ — not too cold, not too hot — made a real difference in not decomposing the functional groups,” Dai said.
The synthesized material had a capacitance of 611 farads per gram — four times higher than a typical commercial material. Pseudocapacitance is storage of charge based on continuous, fast, and reversible oxidation-reduction reactions at the surface of the electrode materials. Pseudocapacitance from such reactions at the oxygen/nitrogen sites contributed to 25% of the overall capacitance. The material’s surface area was among the highest recorded for carbonaceous materials — more than 4000 square meters per gram.
“We achieved the performance of carbon materials at the limit,” Wang said. “Without the goal that machine learning set, we would have kept optimizing materials through trial and error without knowing their limit.”
The key to success was achieving two kinds of pores — mesopores between 2 and 50 nanometers and micropores tinier than 2 nanometers. In experimental analyses, the chemists found that the combination of mesopores and micropores provided not only a high surface area for energy storage, but also channels for electrolyte transport. Miaofang Chi and Zhennan Huang at the Center for Nanophase Materials Sciences, a DOE Office of Science user facility at ORNL, performed scanning transmission electron microscopy to characterize the mesopores, but the micropores were too small to see.
Microscopically, the material looks like a golf ball with deep dimples. The dimples represent mesopores, and the micropores exist in the material between the dimples.
“You are building a highway for ion transport,” Dai said. ”Supercapacitors are all about high-rate performance — fast charging, fast discharging. In this structure that Tao and I designed, you have a larger pore, which you can view as a superhighway. This is connected to smaller roads, or tinier pores.”
“The smaller pores provide a larger surface for storing charge, but the larger pores are like a highway that can speed up the charge/discharge rate performance,” Wang said. “A balanced amount of small and large pores can realize the best performance, as predicted by the artificial neural network model.”
To characterize the electrolyte’s transport in the carbon pores, Murillo Martins and Eugene Mamontov of the Spallation Neutron Source, a DOE Office of Science user facility at ORNL, performed quasielastic neutron scattering. “They tracked the speed on the highway,” Wang said. “This was the first time that neutron scattering was used to analyze diffusion of a sulfuric acid electrolyte in the confined spaces of carbon nanopores.” Neutron scattering revealed that the electrolyte moved at different speeds: quickly in the mesopores and slowly in the micropores.
Wang quantified the capacitance contributions from pores of different sizes and oxidation-reduction reactions at their surfaces via modified step potential electrochemical spectroscopy, a technique that can be done in only a few places in the world. “We found that mesopores doped with oxygen and nitrogen contribute most to the overall capacitance,” Wang said.
The FIRST team performed other studies of the physicochemical properties. Jinlei Cui and Takeshi Kobayashi from Ames National Laboratory used nuclear magnetic resonance to analyze the structure of polymer precursors. Bishnu Thapaliya of ORNL and UTK conducted Raman analysis, revealing the carbon’s amorphous, or disordered, structure. Zhenzhen Yang of UTK and ORNL and Juntian Fan of UTK participated in the surface area measurements.
Although this breakthrough study used the best data at the time, scientists now have even more boundary data for training the machine learning model for the next study.
”Using more data, we can set a new target and push the boundaries of carbon supercapacitors even further,” Wang said. “The successful application of machine learning in materials design is a testament to the power of data-driven approaches in advancing technology.”
Humanoid Robots: The Next-Generation Robotic Workforce
All-Liquid Iron Flow Battery Is Safe, Economical
The First High-Resolution, 3D-Printed Brain
A Breakthrough in Fast-Charging Lithium-Sulfur Batteries
A New Process for Turning CO2 into Sustainable Fuel
Giving Household Robots Common Sense
Building Strong Defenses: Enhancing Supply Chain Resiliency in the Defense Industry
Testing New Unmanned Aircraft Technologies
100% Cloud CAD - The Future of Design Is Now
Virtual Twin as an Accelerator of ADAS and AD Development
Innovating Aircraft Interiors: How to Decrease Weight and Optimize Parts Production
Accelerated SDV Development: Virtual Prototypes of Vehicle Super-Integration Processors
A Soft Robot that Crawls like a Caterpillar
Adding Abundant Elements to Improve Li-ion Battery Cathodes
Answering Your Questions: Lithium-Air Battery vs. Lithium-Ion
How Much Do You Know About Integrated Building Systems?
Comparison Between Wave Soldering and Reflow Soldering
Printed Electronics: The Future Is Flexible
Polycarbonate Seen As Top Choice for LED Lighting
Mapping Gravity with Motion Control
The Modern Industrial Workhorse: PID Controllers
The Basics of Encoder Selection
Researchers Demonstrate Cutting-Edge Chip Technology for Ultra-Low Power AI...
Smart Sensor Technology for the IoT
Networking the IoT with IEEE 802.15.4/6LoWPAN
Opening Up the Potential of Thin-Film Electronics for Flexible Chip Design
Laser Beam vs. Electron Beam Welding Which process works best for what?
Jet-Propelled Sea Creatures Could Improve Ocean Robotics
Mechanical Carbon Materials for Aircraft Seal Applications
Brushless Motors for In-Tank Fuel Pumps
3 eVTOL Companies to Watch in 2024: Archer Aviation, Joby Aviation, and Lilium
The Future of eVTOL Battery Technology
The Future of Hybrid and Electric Military Vehicles
By submitting your personal information, you agree that SAE Media Group and carefully selected industry sponsors of this content may contact you and that you have read and agree to the Privacy Policy.
You may reach us at privacy@saemediagroup.com.
You may unsubscribe at any time.
Maxwell Supercapacitor © 2009-2024 SAE Media Group