The new PT 2,5-2MTB Push-in terminal blocks from Phoenix Contact have two disconnect zones. In conjunction with the three double function shafts, they enable a wide range of distribution applications to be realised in a small space. Compared to a standard disconnect terminal block, the compact PT 2,5-2MTB reduces the length of the terminal strip by half.
The new knife-disconnect terminal block is primarily used in wind turbines, in switchgear building, in process engineering, and in machine building for complex signaling tasks. It currently serves the cross-section range from 0.14 to 4.0 mm². The disconnect zones enable multiple bridging and testing tasks to be performed in one terminal block. In addition, each terminal block has its own test pick-off. The colored disconnect knives and actuating push buttons provide a good overview. Covered Terminal Block
The PT 2,5-2TGB disconnect terminal block is also available to match the knife-disconnect terminal block for use with plug-in fuse and device plugs. This terminal block also has two disconnect zones.
For more information, please contact: Phoenix Contact Ltd Halesfield 13 Telford Shropshire TF7 4PG Tel: 0845 881 2222 Email: marketing@phoenixcontact.co.uk Web: https://www.phoenixcontact.co.uk
Schneider: Transforming the Food and Beverage Supply Chain for Efficiency and Sustainability
Process and Control Today are not responsible for the content of submitted or externally produced articles and images. Click here to email us about any errors or omissions contained within this article.
Sign-up for our weekly eNewsletter
Advertise with us | Media pack
Power Terminal Block © Copyright 1999-2024 Process and Control Today Ltd Registered in England No. 3733110 - studio44