For over 30 years RC Fuel Injection has been blueprinting and balancing both low impedance “peak and hold” and high impedance “saturation” injectors with great success. Many racers worldwide have come to rely on RC for “fuel injection perfection.“ More recently, RC has added “GDI” (gasoline direct injection) refurbishing services to its roster. Related Articles - World Products’ Sportsman II 23-Degree SBC Cylinder Head - CTech Econo4 Trailer Cabinet Package - FuelTech’s FT700 ECU Founders Edition
Direct injection has become increasingly popular with vehicle manufacturers due to being able to precisely deliver a specific measure of fuel into the combustion chamber. But, like port injectors. they can —and do— clog. And in addition to fuel-related clogging, direct injector tips can be contaminated by carbon from combustion events. Propane Diesel Injection
RC begins by flowing the injectors at up to 300 bar fuel pressure (depending on system requirements) and documenting the results. Next, they are ultrasonically cleaned in a special mixture —pulsing the injectors for a more thorough purification. Then, all components subject to wear (O-rings, seals, filters, etc.) are replaced. The refurbished injector is then flowed again to ascertain the volume and evaluate the spray pattern. Before/after results are provided to the customer.
For additional information visit www. RCfuelinjection.com or call 310-320-2277. Overnight service is available with prior arrangements. Injectors should be sent to RC at 1717 Torrance Blvd., Torrance, CA 90501.
AMSOIL 5W-40 synthetic metric motorcycle oil is designed to excel in all areas unique to metric motorcycles, including high engine rpm, wet-clutch lubrication and extreme-pressure regions of gears.
AMSOIL has launched an addition to its premium line of synthetic lubricants formulated for metric motorcycles. AMSOIL 5W-40 Synthetic Metric Motorcycle Oil joins existing 10W-30, 10W-40 and 15W-50 viscosities in the AMSOIL Metric Motorcycle Oil family. It is designed to excel in all areas unique to metric motorcycles, including high engine rpm, wet-clutch lubrication and extreme-pressure regions of gears.
Jomar’s kits are available for 5/16” or 3/8” pushrods, and for small block Ford and Chevrolet.
This system optimizes the potential of distributor and crank trigger-based ignition systems on all 4, 6 and 8-cylinder engines.
Upgrading to a Fluidampr performance damper when engine mods are done further ensures long-term durability and optimum power.
This new package size offers added convenience for owners of boats with larger sumps.
This Terminator X Max EFI kit for Godzilla engines is latest in Holley’s growing portfolio of engine swap solutions.
Cometic’s Duramax gasket kit includes: 4.130″ bore, .047″ MLX cylinder head gaskets.
ACL RACE Series oil pumps are designed with high output and high volume capabilities.
Race Gas Diesel focuses specifically on cetane, oxygen and lubrication.
Refurbished Injectors Content for engine professionals and enthusiasts