October 24, 2013 – Platinum Tools has added five new threaded screw bridle rings (JH802 though JH809) and two new beam clamps (JH966 and JH967) to its inventory of low-voltage cable management solutions.
Offering various diameter sizes and standard thread configurations, the bridle rings attach with beam clamps on flanges up to a half inch. The beam clamps include the JH966-100 for 1/8-in. to 1/2-in. flanges, and E-Z installation to beam flanges up to 1/2 in. The clamps support 1/4-in. and 3/8-in. threaded rod, S-hooks and bridle rings; for standard 1/4-in. 20 or #10-24 threaded bridle rings. The JH967-100 beam clamp for 1/8-in. to 1/2-in. flanges supports drive rings or bridle rings, and requires only a hammer to install. Quick Release Band Clamp
![Platinum Tools adds bridle rings and beam clamps for cable management - Electrical BusinessElectrical Business](http://cdn.globalso.com/saifduct/G-Clamp.jpg)